Bedienungsanleitung Dyson DCO1

Inhaltszusammenfassung zur Seite Nr. 1

Operating manual
Please read carefully before
assembling or using your
DCO1 vacuum cleaner.
Important safety instructions – please read before use
WHEN USING THE DYSON DCO1 VACUUM CLEANER PLEASE ADHERE TO THESE SIMPLE PRECAUTIONS.
BY DOING SO YOU WILL REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY.
1. Do not leave your Dyson cleaner with the plug of the openings blocked with any object that may 13. Static charge can occur in many ways and, when
connected to a mains outlet – unplug when no

Inhaltszusammenfassung zur Seite Nr. 2

PLEASE READ ALL INSTRUCTIONS CAREFULLY 1.Getting started BEFORE USING YOUR DYSON VACUUM CLEANER. Assemble the machine as follows: Wand & hose assembly Accessory tool location Push yellow hose cuff firmly over wand end with twisting motion. All tools are stored neatly on the tool storage posts. 1 Tool 1 Guide wand into hose, keeping it adaptor straight. 2 Locate wand handle into socket from above. 3 Push home until it ‘clicks’ into place. 2 4 Cord storage Wrap cord around both cable winders. clic

Inhaltszusammenfassung zur Seite Nr. 3

WARNING! For your own safety please 2.How to use remember to unplug the machine when not in use and before carrying out maintenance. Carrying handle Clear bin capacity Ensure clear bin is firmly in place Do not fill above this line. before lifting. Clear bin removal & emptying Remove clear bin and cyclone top from Remove clear bin from cyclone top and wrap 1 Press yellow bin catch to release bin. 2 3 machine by lifting up until it releases. a plastic bag around the rim of the clear bin. Invert c

Inhaltszusammenfassung zur Seite Nr. 4

WARNING! For your own safety please 3.Changing the belt remember to unplug the machine when not Replacement belts are available direct from in use and before carrying out maintenance. ( ) Dyson Customer Care Tel: 01666 827272 1. Remove soleplate 2. Line up brush bar 1 Undo three cross-head screws. 2 Remove soleplate by lifting from the back, and then 1 Fit belt over motor remove brush bar. shaft and domed section of brush bar. 2 Pull belt taut and IMPORTANT Use only genuine Dyson belts. 1 loca

Inhaltszusammenfassung zur Seite Nr. 5

WARNING! For your own safety please 4.Blockage procedure remember to unplug the machine when not in use and before carrying out maintenance. IMPORTANT Please check your DCO1 for blockages if you notice that the vacuum cleaner stops picking up, the sound of the vacuum cleaner changes pitch, or the suction reduces or stops altogether. Any ‘Blockage only’ repairs will incur a charge of £35.00*, so please check your machine carefully. *Price correct at time of printing. 1. Check filters 4. Check bel

Inhaltszusammenfassung zur Seite Nr. 6

Electrostatic & HEPA filters Important S Always replace yellow S-level filter Absolute S-Level at least every 3 months S-Level HEPA Bactiguard Bactiguard and HEPA filter every 12 months. Check both filters whenever the bin is emptied and replace as necessary. Please note that if the filters are not checked regularly and changed as required, the motor may overheat, which will cause the thermal cut-out to operate. NOTE: Vacuuming builder’s dust and some carpet fresheners may cause the filters to