Inhaltszusammenfassung zur Seite Nr. 1
RadioShack 8-in-1 LCD ENG.fm Page 1 Friday, February 9, 2007 6:11 PM
8-in-1 LCD Remote
15-100
Please read this user’s guide before installing,
setting up and using your new product
www.radioshack.com
Inhaltszusammenfassung zur Seite Nr. 2
RadioShack 8-in-1 LCD ENG.fm Page 2 Friday, February 9, 2007 6:11 PM TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Battery Use And Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 To Install Batteries: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features and Functions . . . .
Inhaltszusammenfassung zur Seite Nr. 3
RadioShack 8-in-1 LCD ENG.fm Page 3 Friday, February 9, 2007 6:11 PM Manufacturer’s Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Setup Codes for TVs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Setup Codes for Audio Amplifiers. . . . . . . . . . . . . . . . . . . . . . 41 Setup Codes for Audio Accessories . . . . . . . . . . . . . . . . . . . . 42 Setup Codes for Audio Receivers. . . . . . . . . . . . . . . . . . . . . . 42 Setup Codes f
Inhaltszusammenfassung zur Seite Nr. 4
RadioShack 8-in-1 LCD ENG.fm Page 4 Friday, February 9, 2007 6:11 PM INTRODUCTION Thank you for purchasing a RadioShack 8-in-1 LCD Remote. Your remote lets you control up to eight home entertainment devices with one easy-to-use, compact unit. After installing batteries (see next section), you can immediately use the RadioShack 8-in-1 LCD Remote to control Sony home entertainment devices, and a Dish Network satellite receiver. To control other brands, perform the instructions in Progra
Inhaltszusammenfassung zur Seite Nr. 5
RadioShack 8-in-1 LCD ENG.fm Page 5 Friday, February 9, 2007 6:11 PM INSTALLING BATTERIES Your RadioShack 8-in-1 LCD Remote requires four AAA batteries (not supplied) for power. Battery Use And Safety � Use only fresh batteries of the required size and recommended type. � Do not mix old and new batteries, different types of batteries (that is, standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. CAUTION: If you do not plan to use the remote for an exte
Inhaltszusammenfassung zur Seite Nr. 6
RadioShack 8-in-1 LCD ENG.fm Page 6 Friday, February 9, 2007 6:11 PM FEATURES AND FUNCTIONS Use the illustration below to locate features on the RadioShack 8-in-1 LCD Remote and then study the Key Charts (on the next three pages) to learn how they function. To find out what type of devices can be controlled by each device key after programming, see “Device Table” on page 9. 6
Inhaltszusammenfassung zur Seite Nr. 7
RadioShack 8-in-1 LCD ENG.fm Page 7 Friday, February 9, 2007 6:11 PM Key Charts Press this key… To… Enter programming mode. Turn the selected device on or off, or run the macro you programmed for the Power button (see “Setting the Power Macro” on page 20 for more information). Select a device to control. Display the menu for the selected device. Display the menu for the PVR. Display the program guide for the selected device. Move the cursor in the program guide and menu screens.
Inhaltszusammenfassung zur Seite Nr. 8
RadioShack 8-in-1 LCD ENG.fm Page 8 Friday, February 9, 2007 6:11 PM Press this key… To… Exit the selected device's menu, guide, or program. Select the next or previous channel. Select the next or previous chapter on some DVD player models. Increase or decrease the sound level. NOTE: When the device that is set up does not support volume functions, the remote will send volume for TV. Turn the sound off or on. Switch the TV's, VCR's, CBL/SAT’s, or DVD’s input to view TV or video prog
Inhaltszusammenfassung zur Seite Nr. 9
RadioShack 8-in-1 LCD ENG.fm Page 9 Friday, February 9, 2007 6:11 PM Press this key… To… Control your VCR, DVD player, or Video On Demand (VOD) if available on your cable/satellite service. Control the functions of your PVR. Control the Picture in Picture (PIP) functions of your TV or VCR. Record a video program on a record- capable device (press twice). Use the light bulb key to turn LED backlighting on or off. Press and hold this key to display the time and date on the LCD. The tim
Inhaltszusammenfassung zur Seite Nr. 10
RadioShack 8-in-1 LCD ENG.fm Page 10 Friday, February 9, 2007 6:11 PM SETTING THE LANGUAGE Before using your RadioShack 8-in-1 LCD Remote, you must set the default language (either English or Spanish). You cannot use your remote control until you have set the language. To set the language for your remote control for the first time, perform the following steps: 1. After the remote powers up, the LCD displays English OK or . 2. Press OK for English or press until Spanish is displayed.
Inhaltszusammenfassung zur Seite Nr. 11
RadioShack 8-in-1 LCD ENG.fm Page 11 Friday, February 9, 2007 6:11 PM 8. Use the or keys to select either A or P. 9. Press OK once. 10. The LCD displays Success. 11. The LCD displays a day of the week. Use the or keys to change the day if it is not correct. 12. Press OK once. The day is now set. 13. The LCD displays Success. NOTE: The LCD does not display the clock on the screen during normal operation. To view the current time, press and hold the Light bulb key until the LCD display
Inhaltszusammenfassung zur Seite Nr. 12
RadioShack 8-in-1 LCD ENG.fm Page 12 Friday, February 9, 2007 6:11 PM 9. Aim the remote control at your device (for example, TV). Press any key but OK , , , or EXIT to test that the remote control works with your device. Use the keys to select a different code within the same brand, if any. Press OK to save. 10. The LCD displays Success. 11. The LCD displays Edit Text. This option allows you to change the default display for this mode from the brand of the device (for example, Sony
Inhaltszusammenfassung zur Seite Nr. 13
RadioShack 8-in-1 LCD ENG.fm Page 13 Friday, February 9, 2007 6:11 PM AUX Code Device Type:___________________ CD Code Device Type:___________________ DVD Code Device Type:___________________ AUD Code Device Type:___________________ SAT/CBL Code Device Type:___________________ TV Code Device Type:___________________ PVR Code Device Type:___________________ VCR Code Device Type:___________________ 13
Inhaltszusammenfassung zur Seite Nr. 14
RadioShack 8-in-1 LCD ENG.fm Page 14 Friday, February 9, 2007 6:11 PM Programming a Device by Searching for Its Code If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code. For example, to search for a code for your TV: 1. Press and hold P until the LCD displays Code Set OK or . 2. Press OK. 3. Use the key to scroll through the LCD display until the LCD displays Search. 4. Press OK once.
Inhaltszusammenfassung zur Seite Nr. 15
RadioShack 8-in-1 LCD ENG.fm Page 15 Friday, February 9, 2007 6:11 PM USING MY SYSTEM MODE The RadioShack 8-in-1 LCD Remote includes a custom Home Theater mode. After the My System key is programmed, it will allow you to access four groups of remote control keys without having to change device modes. Control Organization About Control Groups For Home Theater programming, the remote control’s keys are grouped by type of control into the following four control groups: Playback Group: Tran
Inhaltszusammenfassung zur Seite Nr. 16
RadioShack 8-in-1 LCD ENG.fm Page 16 Friday, February 9, 2007 6:11 PM If the default settings fit your needs, you can skip programming this mode. Otherwise, perform the steps in the following section to assign device modes to the Control Groups. PROGRAMMING MY SYSTEM MODE 1. Press and hold P until the LCD displays Code Set OK or . Use the keys to scroll through the LCD until My System OK or is displayed. Press OK. 2. The LCD displays Channel OK or . Press OK. 3. The LCD display
Inhaltszusammenfassung zur Seite Nr. 17
RadioShack 8-in-1 LCD ENG.fm Page 17 Friday, February 9, 2007 6:11 PM � For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning. Programming a Learned Key 1. Press and hold P until the LCD displays Code Set OK or . Use the keys to scroll through the LCD display until Learn is displayed. Press OK. 2. The LCD displays Add Learn OK or .
Inhaltszusammenfassung zur Seite Nr. 18
RadioShack 8-in-1 LCD ENG.fm Page 18 Friday, February 9, 2007 6:11 PM 3. The LCD displays Press Mode or . 4. Press the mode key once (i.e., TV, VCR , PVR, CBL/ SAT, CD, DVD, AUX, or AUDIO) for the mode you want to delete the learned key from. 5. The LCD displays DLT Key or . Press OK. 6. The LCD displays Select Key or . 7. Press the key containing the learned function to be deleted. The LCD displays Are U Sure OK or . 8. Press OK. The LCD displays Success. 9. Repeat steps 5 through
Inhaltszusammenfassung zur Seite Nr. 19
RadioShack 8-in-1 LCD ENG.fm Page 19 Friday, February 9, 2007 6:11 PM 7. The LCD displays Press To Mode. For the destination mode, press a desired device key once (i.e., AUX, CBL/SAT, CD, TV, DVD, AUDIO, VCR, or PVR). For this example, press DVD once. 8. The LCD displays Press To Key. For the destination key, press a key to be moved once. For this example press VOL once.Upon keymoving, the LCD displays Success. 9. Repeat steps 3 to 8 to move additional keys. For this example, repeat st
Inhaltszusammenfassung zur Seite Nr. 20
RadioShack 8-in-1 LCD ENG.fm Page 20 Friday, February 9, 2007 6:11 PM PROGRAMMING FAVORITE CHANNEL SCAN The remote allows you to store a list of up to 10 favorite channels, in any order, that are immediately scanned when you press FAV (SCAN). NOTE: You can only store channels from one device for Favorite Channel Scan. 1. Press and hold P until the LCD displays Code Set OK or . 2. Use the use the or keys to scroll through the LCD display until Fav Ch is displayed. Press OK. 3. The
