Inhaltszusammenfassung zur Seite Nr. 1
Universal
Remote
Control
Model: SL-7000
OPERATING MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing the Star Light universal remote control. This unit was desingned to fully complement your home entertainment system. Any comments or questions about this product should be directed to Universal Remote Control, Inc., New Rochelle, NY 10801. You can also call our toll-free Customer Service Line at 1-800-901-0800 for any assistance. Please read this instruction manual carefully. The Star Light universal remote control has man
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Page Introduction ............................................................... 4 Battery Installation ................................................... 5 Programming the Remote ......................................... 6 7 A. Quick Set-Up C. Standard Set-Up Advanced Features ...................................................... 8 12 A. Code Number Recall B. Storing Multi-Commands/Favorite Channels to emory Buttons C. Assigning Device Codes to other Device Buttons
Inhaltszusammenfassung zur Seite Nr. 4
INTRODUCTION The Star Light universal remote control can replace or consolidate up to six (6) of your remote controls. It is already preprogrammed, so there is no need to have your original remote. The Star Light universal remote works with virtually all IR (Infrared) equipment, including : TV' s, VCR's, Cable Boxes, Satellite Receivers, Compact Disc Players, A/V Receivers, Cassette Decks, and many other audio /video components. 4
Inhaltszusammenfassung zur Seite Nr. 5
Battery Installation The Star Light remote control is powered by four AAA batteries (included). Please be sure to match the ( ) and (-) on the batteries to the ( ) and (-) marking inside + + the battery compartment. Battery Compartment Cover Removal To remove the battery compartment, located on the rear of the remote, press down and push forward toward the top of the remote control. To close the battery compartment cover, slide the cover straight back until it clicks into place. Diagram for
Inhaltszusammenfassung zur Seite Nr. 6
Programming the Remote A. Quick Set-Up: Step 1: Turn on the device (TV, VCR,CABLE BOX, SATELLITE RECEIVER,etc .) you wish to operate. Step 2: On the remote control, press the corresponding DEVICE button (TV, VCR, CATV, SAT, etc.) and MUTE button simultaneously. Note: SET will appear in the LCD. Step 3: Point the remote control toward the device. Punch in the first three digit code number assigned to your brand from the brand code lists located on pp.(15 30).The device will turn off when
Inhaltszusammenfassung zur Seite Nr. 7
( ) Programming the Remote, Continued C. Standard Set-Up: Step 1: Turn on the device ( TV, VCR, Cable Box, Satellite Receiver, etc. ) that you wish to operate. Step 2: On the Star Light universal remote control, press the corresponding DEVICE button (TV, VCR,CATV, SAT,Audio,or Aux) and the MUTE button simultaneously. Note: SET will appear in the LCD. Step 3: Locate the three digit code number for your brand of equipment from the code lists found on pp. (15 31). Example: TV codes-Sony 0
Inhaltszusammenfassung zur Seite Nr. 8
Advanced Features A. Three Digit Code Number Recall: If you wish to find a code number that has been stored in your remote control, please use the following steps: Step 1: On the remote control, press the DEVICE and MUTE buttons simultaneously. Note: SET will appear in the LCD. Step 2: Press the INPUT button. The LCD will flash the three digit code number for five seconds before returning to its original sate. B. Storing Multi-Commands/Favorite Channels to Memory Buttons Memory buttons M1, M2,
Inhaltszusammenfassung zur Seite Nr. 9
Example: Memory button M1 in the SAT mode can be set up to do the following functions: to turn on the Satellite receiver, select channel #18 on the satellite receiver, and then turn on the TV. Step 1:Press the SAT and MUTE buttons, simultaneously. Note: SET will appear in the LCD. Step 2:Press memory button M1. Note: M 1 will appear in the LCD. Step 3:Press the Power buttons (to turn on the satellite receiver). Note: M 1 1 will appear in the LCD. Press the # 1 button (to selec
Inhaltszusammenfassung zur Seite Nr. 10
( ) Advanced Features Continued C. Assigning Different Device Codes to other Device Buttons This feature can be used to program the remote control for more than one TV, VCR, Satellite Receiver, etc. The three digit code for any device can be stored in any of the DEVICE buttons. For example: For two VCRs, the first VCR can be stored in the VCR DEVICE button under normal set up procedures, and the second VCR can be programmed into the unused CATV or any other DEVICE button. Step 1: Turn on the
Inhaltszusammenfassung zur Seite Nr. 11
( ) Advanced Features Continued D. Punch Through TV Volume Control After setting up the remote control to work with your respective TV, VCR, CATV, Satellite equipment, etc., the remote control can also be set up so that theTV volume control will supersede respective equipment volume control, even when the remote control is in a different Device mode. Step 1:Press the DEVICE button (VCR, CATV, SAT, etc.)and MUTE button simultaneously. Note: SET will appear in the LCD Step 2: Press the VOLUME (+
Inhaltszusammenfassung zur Seite Nr. 12
( ) Advanced Features Continued E. Punch Through VCR Controls. After setting up the remote control to work your respective TV, VCR, CATV, Satellite equipment, etc, the remote control can also be set up so that the VCR control buttons (PLAY, STOP, FAST FORWARD, REWIND, PAUSE, and RECORD) will operate (VCR controls), even when the remote is in a different Device mode. For example, you can control your VCR while in the CATV mode, eliminating the need to switch between CATV and VCR modes to op
Inhaltszusammenfassung zur Seite Nr. 13
Satellite key Pad Information Many satellite receivers have a letter/ number assignment for satellite names and numbers. Since these assignments differ from one satellite manufacturer to another, we have listed the corresponding letter/ number designation by code on pages(31~44) Please copy the letters assigned to your code onto the peel off label we have included Place this label on the back of the remote control for future use. Hidden Buttons Eight (8) additional buttons are located beneath th
Inhaltszusammenfassung zur Seite Nr. 14
Warranty The Star Light remote control comes with a one year warranty from date of purchase. Specifications MODEL : SL-7000 BATTERY: Four 1,5 AAA Battery DIMENSION: (H x W x D) 8.88" x 2.75" x 1.25" WEIGHT: 6.6 oz. (with batteries) 14
Inhaltszusammenfassung zur Seite Nr. 15
Three Digit Code Lists TV Maker (Brand) Name Code Number (3 digit) List 112 143 A MARK AKAI 001 146 AMPRO 167 073 AMSTRAD 052 ANAM 043 054 056 080 104 108 112 115 118 121 131 AOC 001 004 112 BLAUPUNKT 088 CANDLE 001 002 003 004 CAPEHART 058 CETRONIC 043 CITIZEN 001 002 003 004 043 101 103 143 CLASSIC 043 CONCERTO 004 CONTEC 039 043 050 051 CORONADO 143 CRAIG 043 054 CROWN 043 143 CURTIS MATHES 001 101 116 143 CXC 043 DAEWOO 004 016 017 043 044 055 071 076
Inhaltszusammenfassung zur Seite Nr. 16
Three Digit Code Lists TV Maker (Brand) Name Code Number (3 digit) List GOLDSTAR 102 106 110 112 113 116 119 122 127 137 143 HALL MARK 116 HITACHI 011 163 166 158 143 004 010 012 023 075 001 009 041 INFINITY 164 INKEL 129 JBL 164 JCPENNY 001 008 030 065 101 160 004 024 143 009 156 JENSEN 013 JVC 038 083 145 034 KEC 043 KENWOOD 001 KLOSS 002 059 KMC 143 KTV 043 001 143 154 LODGENET 072 LOGIK 072 LUXMAN 004 LXI 166 007 015 164 160 081 052 MAGNAVOX 16
Inhaltszusammenfassung zur Seite Nr. 17
Three Digit Code Lists TV Maker (Brand) Name Code Number (3 digit) List ONKING 043 ONWA 043 OPTONICA 019 081 PANASONIC 034 080 092 056 164 PHILCO 001 003 024 056 059 060 063 064 164 004 143 043 127 PHILIPS 164 038 070 093 001 003 004 143 059 160 PIONEER 135 025 023 001 018 116 027 PORTLAND 004 143 PROSCAN 144 PROTON 004 131 143 058 171 QUASAR 034 092 056 RADIO SHACK 019 043 047 116 127 143 RCA 160 161 165 065 156 144 001 004 023 024 056 074
Inhaltszusammenfassung zur Seite Nr. 18
Three Digit Code Lists TV Maker (Brand) Name Code Number (3 digit) List SYLVANIA 001 003 059 060 063 064 164 044 160 116 127 140 TANDY 081 TATUNG 056 062 TECHNICS 084 TECHWOOD 004 TEKNIKA 001 002 003 004 024 028 043 072 101 143 031 077 103 TELEFUNKEN 037 046 086 087 TELERENT 072 TMK 004 116 TOSHIBA 015 138 030 007 040 062 101 051 TOTEVISION 143 UNIVERSAL 008 009 VIDEO CONCEPTS 146 VIDTECH 004 116 WARDS 004 008 009 019 028 060 061 063 064 072 074 116
Inhaltszusammenfassung zur Seite Nr. 19
Three Digit Code Lists VCR Maker (Brand) Name Code Number (3 digit) List AIWA 034 AKAI 146 043 046 124 125 142 016 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MATHES 031 003 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 DAYTRON 108 DBX 012 023 039 043 DYNATECH 034 053 ELECTROHOME 059 EMERSON 006 029 035 025 027 034 036 037 046 101 129 131 138 017 0
Inhaltszusammenfassung zur Seite Nr. 20
Three Digit Code Lists VCR Maker (Brand) Name Code Number (3 digit) List LXI 034 101 013 014 MAGIN 040 MAGNAVOX 067 031 034 041 033 068 MARANTZ 031 067 012 033 069 MARTA 101 MATSUI 027 030 MEI 031 033 MEMOREX 101 003 010 014 031 034 053 072 139 134 033 MGA 045 046 059 MINOLTA 013 020 MITSUBISHI 059 061 151 046 051 142 013 020 045 049 MTC 034 040 MULTITECH 024 034 NEC 012 023 043 048 039 NORDMENDE 043 OPTONICA 053 054 PANASONIC 066 070 083 145 133
