Bedienungsanleitung JL Audio Stealthbox SB-POL-RNGR700

Inhaltszusammenfassung zur Seite Nr. 1

SB-POL-RNGR700 INSTR_SKU# 011295
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that the
Stealthbox
®
out
Slampak be properly mounted to the vehicle according to these instructions.
o F
Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
15
caused by the force exerted by the woofer(s).
SB-

Inhaltszusammenfassung zur Seite Nr. 2

SB-POL-RNGR700 INSTR_SKU# 011295 S T E P 7 s t e P 3 Install the “Zig- Zag” bracket as shown, line it up with the Looking from the front of the vehicle towards location #1 upper seat rail and drill the upper mount hole. Install a from the previous steps, notice mounting and, orientation Hex Head Bolt, Split Lock Washer and Hex Nut, t ighten of Hex Head Bolt, Split Lock Washer, Hex Nut. Use the Long all of this hardware as well as the hardware installed gold colored bolt, Split Lock Wash

Inhaltszusammenfassung zur Seite Nr. 3

I n C l u d e d H a R d W a R e SB-POL-RNGR700 INSTR_SKU# 011295 2) Custom Steel Bracket 2) 3/8-16 x 2 3/4” Hex Head Bolt 1) 3/8-16x 1” Hex Head Bolt 1) 3/8 x 1 1/4” Fender Washer 3) 3/8 Split Locking Washer 4) 5/16 SS Black Washer 2) 5/16-18 x 3/4” Steel Black Cap Screw 4) 5/16 Steel Split Lock Washer 1) 5/16-18 x 3-1/2” Steel Cap Screw 3) 5/16-18 Steel Hex Nut s P e C I F I C a t I o n s Subwoofer Enclosure Type: Acoustic Suspension (sealed) Driver Type: M10W5 Nominal Impedance: 4 Oh