Inhaltszusammenfassung zur Seite Nr. 1
OWNER’S
MANUAL
COLOR TV/VCR
WF0213C
This Owner’s Manual is made of
recycled paper.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
®
As an ENERGY STAR
Partner, our company has
determined that this product meets
®
the ENERGY STAR guidelines for
If you need additional assistance for set-up or operating
®
energy efficiency. ENERGY STAR is
after reading owner’s manual, please call
a U.S. registered mark.
TOLL FREE : 1-800-242-7158.
Please read before using this equipment
Inhaltszusammenfassung zur Seite Nr. 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DAN- CAUTION GEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT RISK OF ELECTRIC SHOCK WITHIN THIS UNIT. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND SHOCK, DO NOT REMOVE COVER (OR BACK). MAINTENANCE INSTRUCTIONS IN THE NO USER SERVICEABLE PARTS INSIDE. REFER LITERATURE ACCOMPANYING THE
Inhaltszusammenfassung zur Seite Nr. 3
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRI C SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A 13.Outdoor Antenna grounding-If an outside antenna or 19.Damage Requiring Service-Unplug this TV/VCR from cable system is connected to the TV/VCR, be sure the the wall
Inhaltszusammenfassung zur Seite Nr. 4
PRECAUTIONS PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION LOCATION Unauthorized recording or use of broadcast televi- For safe operation and satisfactory performance of sion programming, video tape, film or other copy- your TV/VCR, keep the following in mind when righted material may violate applicable copyright selecting a place for its installation: laws. We assume no responsibility for the unautho- Shield it from direct sunlight and keep it away • rized duplication, use, or other acts which inf
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .17 NORMAL PLAYBACK . . . . . . . . . . . . . . . . . .17 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 AUTO REPEAT PLAYBACK . . . . . . . . . . . . .17 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 AVOID THE HAZARDS OF ELECTRICAL STILL PICTURE . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 6
FEATURES Infrared remote control Zero Return–The tape returns to counter of • • 0:00:00 by rewinding or fast forwarding. Bilingual on screen menu display selectable in • English or Spanish Still–“Freeze” the picture at any time, for close • viewing of a particular scene. Only tapes recorded Real time counter–This shows the elapsed record- • in SLP mode will show a fairly clear picture. ing or playback time in hours, minutes, and sec- onds. The “–” indication will appear when the tape Digital Aut
Inhaltszusammenfassung zur Seite Nr. 7
OPERATING CONTROLS AND FUNCTIONS NOTE: We do not recommend the use of universal remote controls. Not all of the functions may be controlled with • a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control. - TV/VCR FRONT PANEL - [Fig.1] VIDEO AUDIO POWER VOLUME CHANNEL STOP/EJECT REW PLAY F.FWD REC/OTR EARPHONE 1 2 3 4
Inhaltszusammenfassung zur Seite Nr. 8
- REAR VIEW - [Fig.3] ANT. 26 27 +100 button– When selecting cable channels 8 REW button– Press to rewind the tape, or to view which are higher than 99, press this button first, the picture rapidly in reverse during playback then press the last two digits. (To select channel mode. (Rewind Search) 125, first press the “+100” button then press “2” s button– and “5”). Press to select a mode from a particular menu. • 16 MENU button– Press to display the main menu on (for example: LANGUAGE or USER’S
Inhaltszusammenfassung zur Seite Nr. 9
OUT IN PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS From Cable System or Satellite Dish VHF/UHF Antenna Satellite Box or Rod Antenna (Not supplied) Cable Box (Supplied) (Not supplied) VHF Antenna (Not supplied) UHF Antenna From (Not supplied) or Cable System ANT. VHF/UHF Combiner or (Not supplied) ANT. or 75-ohm Coaxial Cable (Not supplied) Flat twin-lead cable or VHF/UHF COMBINED ANTENNA VHF/UHF SEPARATE ANTENNAS The VHF/UHF Rod Antenna (supplied) is detach- In some areas it will be necessary
Inhaltszusammenfassung zur Seite Nr. 10
TO RECORD A SCRAMBLED/UNSCRAMBLED INSTALLING THE BATTERIES CHANNEL 1. Set the TV/VCR channel selector to the output 1)Open the battery compartment cover by pressing channel of the Cable Converter Box or Satellite the cover on the remote unit in the direction of the Box. (Ex. CH3) arrow. 2.Select the channel to record from your Cable 2)Insert 2 “AA” penlight batteries into the battery Converter Box or Satellite Box. compartment in the direction indicated by the polarity (+/-) markings. 3)Replace
Inhaltszusammenfassung zur Seite Nr. 11
1 Select “SETTING CLOCK” – M E N U – TIMER PROGRAMMING TO SELECT A DESIRED CHANNEL Press the MENU button on the PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP remote control. You can select the desires channel by using the USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] Press the PLAY/K or STOP/L but- CHANNEL K or L button on or directly pressing CAPTION [OFF] ZERO RETURN ton to point to “SETTING TIME SEARCH the number buttons on the remote control. CLOCK”. Note for using the number buttons: T
Inhaltszusammenfassung zur Seite Nr. 12
NOTE: 1 Select “SETTING CLOCK” – M E N U – When unplugging the AC cord or if there is a power Press the MENU button on the TIMER PROGRAMMING PICTURE CONTROL failure for more than 3 seconds, you may have to B SETTING CLOCK remote control. CHANNEL SET UP reset the clock. USER’S SET UP Press the PLAY/K or STOP/L but- V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ton to point to “SETTING ZERO RETURN TIME SEARCH TO CHANGE CLOCK SETTING CLOCK”. If you want to change the clock, Then, press the F.FWD
Inhaltszusammenfassung zur Seite Nr. 13
1 Select “CHANNEL SET UP” 2 Select “ENGLISH” or “ESPAÑOL” Press the MENU button on the – M E N U – Select “ENGLISH” or “ESPAÑOL”= Spanish using TIMER PROGRAMMING remote control. the F.FWD/B or REW/s button. PICTURE CONTROL SETTING CLOCK B CHANNEL SET UP Press the PLAY/K or STOP/L but- USER’S SET UP V-CHIP SET UP ton to point to “CHANNEL SET LANGUAGE [ENGLISH] CAPTION [OFF] 3 Exit the Language mode ZERO RETURN UP”. TIME SEARCH Press the MENU button on the remote control to Then, press the F.FWD
Inhaltszusammenfassung zur Seite Nr. 14
TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL The TV/VCR’s picture controls – BRIGHT, CON- TRAST, COLOR, TINT and SHARPNESS – are 1 Turn on the TV/VCR preset to factory specifications. Although they are Press the POWER button to turn on the TV/VCR. usually the best, you may need to make some further adjustments for a natural looking image. 2 Select the channel number NOTES: Press the CHANNEL K or L button to select your Procedures must be followed within 5 seconds or • desired channel numbe
Inhaltszusammenfassung zur Seite Nr. 15
TO CANCEL THE CLOSED CAPTION CLOSED CAPTION SYSTEM SYSTEM You can view specially labeled (cc) TV programs, Repeat steps [1] and [2], select [OFF] using the movies, news, pre-recorded tapes with either a dia- F.FWD/B or REW/s button. Press the MENU but- logue caption or text display. ton on the remote control to return to TV mode. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning WHEN THE CLOSED CAPTION MODE the dialogues and the contents of news.
Inhaltszusammenfassung zur Seite Nr. 16
3 Select your desired item 4 Exit the V-Chip setting mode Press the PLAY/K or STOP/L button to point to Press the MENU button on the remote control to your desired item. return to original mode. Then, press the F.FWD/B button to select [BLOCK] or [VIEW]. B TV–Y [VIEW] MPAA RATING SET UP TV–Y7 ( ) [VIEW] TV–G [VIEW] TV–PG ( ) [VIEW] TV–14 ( ) [VIEW] Make sure ... When you select the rating cate- TV–MA ( ) [VIEW] • gory and turn it [BLOCK], the TV/VCR power must be turned on. • higher rating will
Inhaltszusammenfassung zur Seite Nr. 17
PLAYBACK This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. INSERTING A CASSETTE AUTO REPEAT PLAYBACK Insert the cassette in the direction as shown. Push in The TV/VCR has the auto repeat function that allows gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The you to repeat a tape indefinitely without touching the TV/VCR will automatic
Inhaltszusammenfassung zur Seite Nr. 18
NOTES: SEARCH Time Search can be set up to a maximum of 9 • hours 50 minutes (9:50) by 10 minutes at a time. PICTURE SEARCH This function will not operate in recording mode. • This feature is very useful in finding or skipping over In the example below: To watch a program after 2 a particular scene on a tape. In this mode, the sound hour 50 minutes from the present position, in either will be muted. direction. 1)You may view a video tape at a high speed in either a forward or reverse direction b
Inhaltszusammenfassung zur Seite Nr. 19
NOISE CANCEL (in the Still mode) RENTAL PLAYBACK This feature allows you to reposition or reduce the This function enables you to improve the picture noise lines of a still picture.Press the PAUSE/STILL quality when playing back worn cassettes such as button so that the noise lines change position on the rented tapes. screen so you can see the picture in its entirety with- out distracting noise lines. 1 Select “USER’S SET UP” – M E N U – NOTE: This feature can be activated ONLY when TIMER PROGRA
Inhaltszusammenfassung zur Seite Nr. 20
Make sure ... TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to • the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. NORMAL RECORDING OTR (One Touch Recording) You can ONLY watch the same TV program that is This function enables you to set a recording length being recorded. simply by pressing the REC/OTR button on the TV/VCR. 1 Select the chan
