Bedienungsanleitung JL Audio Stealthbox SB-J-GCHER3/10W1v2/TN

Inhaltszusammenfassung zur Seite Nr. 1

SB SB- -J J- -G GC CH HER ER3/ 3/1 10 0W W1 1v v2 2_ _IINS NST TR R_ _S SK KU U# #0 01 11 12 23 35 5
INSTALLATION

DIFFICULT Y:
If you choose to perform the installation yourself, it is absolutely vital that
®
OUT
the Stealthbox be properly mounted to the vehicle according to these
OF
instructions. Failure to mount the enclosure properly presents two problems:
INSTALL ATION GUIDE
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
25
caused by the force

Inhaltszusammenfassung zur Seite Nr. 2

SB SB- -J J- -G GC CH HER ER3/ 3/1 10 0W W1 1v v2 2_ _IINS NST TR R_ _S SK KU U# #0 01 11 12 23 35 5 STEP 4 STEP 8 Remove the tailgate’s bottom sill plate. With a Phillips head screw driver, remove the screw from the front section of the plastic side panel. STEP 5 STEP 9 Remove the false floor. With a Phillips head screw driver, remove the screw from the rear section of the plastic panel. Remove the two mounting bolts that secure the flooring to the vehicle. STEP 6 STEP 10 Remove the floo

Inhaltszusammenfassung zur Seite Nr. 3

SB SB- -J J- -G GC CH HER ER3/ 3/1 10 0W W1 1v v2 2_ _IINS NST TR R_ _S SK KU U# #0 01 11 12 23 35 5 STEALTHBOX WALL VEHICLE SHEET METAL STEP 1 2 STEP 16 Remove the d-pillar plastic cover. The illustration to the left shows how all the supplied hardware makes up the mounting assembly. SOCKET CUP SET SCREW SOCKET CUP SET SCREW FLAT WASHER Place a lock washer and then flat washer onto the hex bolt. HEX NUT HEX BOLT Place both coupler nuts onto one socket cup set screw. Make sure that there is e

Inhaltszusammenfassung zur Seite Nr. 4

S SB B- -J J- -G GC CH HER ER3/ 3/1 10 0W W1 1v v2 2_ _IINS NST TR R_ _S SK KU U# #0 01 11 12 23 35 5 STEP 2 0 STEP 24 Run speaker wire from the amplifier location to the Place the flooring back into the vehicle from STEPS 5&6, Stealthbox® location. and secure. STEP 2 1 STEP 25 Place the Stealthbox® into the mounting area. Guide the Secure the tailgate’s bottom sill plate back into place, from exposed socket cup set screw through the hole on the back STEP 4. side of the Stealthbox®. Place a su

Inhaltszusammenfassung zur Seite Nr. 5

SB SB- -J J- -G GC CH HER ER3/ 3/1 10 0W W1 1v v2 2_ _IINS NST TR R_ _S SK KU U# #0 01 11 12 23 35 5 STEP 2 8 INC L UDED H A RD W A RE With a Phillips head screw driver, secure the screw that was remove in STEP 9. (1 (1) ) 3 3/ /8 8- -in inch ch- -1 16 x 1 6 x 1- -in inch H ch He ex T x Ta ap B p Bo ollt t ( (1 1) ) 3 3/ /8 8- -iin nch x 1 ch x 1- -1 1/ /4 4- -iin nc ch F h Fe en nd de er W r Wa as sh he er r (2) (2) R Ro od C d Co ou up plin ling g N Nu ut t ( (1 1) 3 ) 3/ /8 8- -iin nch