Inhaltszusammenfassung zur Seite Nr. 1
LCD TV RECEIVER
USER'S MANUAL
MODEL:
Please read this manual carefully before
L19R1BW
using your television and keep this manual
In a good place for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
To users: Thank you for using our LCD-TV. Before connecting the LCD-TV and turning the power on, please read this book carefully. CONTENT Safety Notice Items................................................................................... 1 Front Panel Controls.................................................................................. 2 Connection Options................................................................................... 3 Remote Control Key Functions.................
Inhaltszusammenfassung zur Seite Nr. 4
Safety Notice Items Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To insure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; l Please keep the book for later use; l Please comply with the warning instructions on the machine and in this book strictly; l Please comply with
Inhaltszusammenfassung zur Seite Nr. 5
Front Panel Controls 5 2 3 4 1 TV/AV MENU VOL- VOL+ CH- CH+ POWER (FRONT) 6 7 Control Panel Function 1. Power supply switch 2.TV/AV Select the input signals: TV/AV/S-VIDEO/PC/COMPONENT 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5. CH- TV channel down / to select the item in the menu CH+ TV channel up /
Inhaltszusammenfassung zur Seite Nr. 6
Connection Options (BACK) Pr/Cr Pb/Cb Y R L V ANT IN PC AUDIO IN AUDIO IN VIDEO IN S-VIDEO COMPONENT IN VGA IN HDMI 1.ANT IN(Antenna Input) Connect cable or antenna signals to the TV, either directly or through your cable box. 2.Earphone port 3.PC Audio Input Connect the PC output connector from a PC to the audio input port. 4.AV /S-VIDEO/COMPONENT Audio Input Connect audio output from an external device to this jack. 5.Video Input Connect video output fr
Inhaltszusammenfassung zur Seite Nr. 7
Remote Control Key Functions When using the remote control, aim it Buttons on the remote control towards the remote sensor on the TV Stand By MUTE Display current input signal information TV channel number select SLEEP DISPLAY MUTE POWER Set time to change the TV into the standby status after a period of preset NICAM PC AUTO AD TV/AV time. NICAM/A2 Stereo select EXIT Quick TV channel switch(return to the last channel) Volume down/up Left/right orientation to adjust the item in the OSD TV c
Inhaltszusammenfassung zur Seite Nr. 8
Remote Control Installing Batteries 1.Slide open the cover of the battery compartment on the back of the remote control. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. 1 2 3 Precautions As strong light may interfere the Make sure that there is no signals, change your position to obstacle between the remote operate the remote controller if controller and television set. the television ca
Inhaltszusammenfassung zur Seite Nr. 9
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Mul
Inhaltszusammenfassung zur Seite Nr. 10
Connection Instructions VGA Input You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off; VGA IN 3.Connect a D type 15-pin VGA interface cable ( not supplied ) to the VGA video interface connector on the PC. Then connect the other end to the PC video i
Inhaltszusammenfassung zur Seite Nr. 11
Connection Instructions COMPONENT (If connected to SVIDEO,select the SV external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Y Pb Pr S-VIDEO Input - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has
Inhaltszusammenfassung zur Seite Nr. 12
Connection Instructions Cable TV Input - After subscribing to a cable TV service from a local provider you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. - For further information regarding cable TV service, contact your local cable TV service provider(s). Connection Option 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channe
Inhaltszusammenfassung zur Seite Nr. 13
Basic Operating Instructions Turn on the LCD-TV SLEEP DISPLAY MUTE POWER When the POWER button on the remote control is pressed N IC A M P C AUTO AD TV/AV and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER button, the LCD-TVwill go into standby mode and the indicator light turns red. PSM .S S M O K Q .V IE W Note: P+ The display of the input mode will disappear in about 8 V- M E N U V+ second
Inhaltszusammenfassung zur Seite Nr. 14
Basic Operating Instructions Select the TV Channel You Want You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the keys on the remote control or on the panel to make a selection. 1.Press the relevant key on the remote control if you want to choose any channel from 0 to 9. for example: if you want to choose channel 8, just press the key number 0 and 8. Note: You must press 0 first and then the other
Inhaltszusammenfassung zur Seite Nr. 15
Menu Operations * In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to help you with the TV operation. Press TV/AV to select the input source, and the menu in the different source is different . 1. Press MENU button to display the main menu, and V+/V-to select the main menu . 2. Press P+/P- to scroll through the options 3. Press V+/V- buttons to make changes to the parameters 4. Press the OK button to exit the menu Picture Men
Inhaltszusammenfassung zur Seite Nr. 16
Menu Operations Picture Menu Options continued 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . Function: BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture. CONTRAST : Adjust the contrast of the pi
Inhaltszusammenfassung zur Seite Nr. 17
Menu Operations Audio Menu Options continued You can adjust sound options to the levels you prefer. 2. Press P+/P- button to enter the audio menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved. Function : VOLUME : Adjust the volume of your TV BALANCE : Adjust the balance of the audio output from le
Inhaltszusammenfassung zur Seite Nr. 18
Menu Operations Function Menu Options 1. Press MENU button and V+/V- until the following menu appears on the screen. FUNCTION INPUT SOURCE TV LANGUAGE ENGLISH TXT LANGUAGE PAN EUROPEAN TXT EAST/WEST EAST BLUE SCREEN ON DISPLAY MODE 4:3 RESET CHILD LOCK 2. Press P+/P- button to en
Inhaltszusammenfassung zur Seite Nr. 19
Menu Operations if buttons on the television are pressed, the screen will display CHILD LOCK. The child lock mode can be resumed by entering lock set menu, set child lock on. Adjust Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen. ADJUST AUTO SYNC. PHASE 50 50 CLOCK 50 H. POSITION V. POSITION 50 Note: This menu only appears in PC mode . 2. Press P+/P- button to enter the adjust menu and to go up and down to select the desired option. 3.Press
Inhaltszusammenfassung zur Seite Nr. 20
Menu Operations Tuning Menu Options 1. Press MENU and V+/V- button until the following menu appears on the screen. TUNING TUNING PROGRAM AUTO SEARCH Note: This menu only appears in TV mode . 2. Press P+/P- button to enter the tuning menu and to go up and down to select the desired option . 3.Press V+/V- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step
