Inhaltszusammenfassung zur Seite Nr. 1
COLOR TV RECEIVER
OWNER'S MANUAL
The Owner`s Manual for the Follow Models:
D29FV6-A, D29FV6, D34FV6-A, D34FV6
Please READ this manual carefully
before operating the unit, and keep
it for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
* For your enjoyment of this TV set, please read this manual carefully and keep it good for future reference. CONTENTS Before Operation Warning and cautions................................................................................................1 Installation...............................................................................................................2 Antenna connection.............................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
Warning and Cautions 4. Do not place the TV set near rain or 1. When you clean the TV set, please pull out the power plug from AC outlet. moisture as it may cause an electric Don't clean the cabinet and the shock, or the TV set to catch fire. The screen with benzene, petrol and other TV set must only chemicals. be used in dry in door locations. 2. In order to prolong the using life of 5. The back cover must only be the TV set, please place it in a well removed by a registered electr
Inhaltszusammenfassung zur Seite Nr. 4
Installation Antenna connection General speaking, to enjoy a clearer picture, we recommend that you use a CATV system or an outdoor antenna .In different places, the suitable antenna type and position are different. 300 twin-lead cable Antenna adapter Mixer (additional purchase) additional purchase 75 coaxial cable Antenna input 75 standard coaxial type Plug (additional purchase) AC power socket * the plug type may vary Note depending on the model. It is recommended that y
Inhaltszusammenfassung zur Seite Nr. 5
Position of Buttons and Plug-ins Front and Side panel D29FV6 , D34FV6 Model Side AV terminal Channel position up/down Infrared receiver Volume up/ down TV/Video MENU (input selector Power indicator Power switch Back panel D29FV6 Model D34FV6 Model DVI input terminal DVI input terminal Antenna input Antenna input VGA input terminal VGA input terminal AV output terminals DVI IN DVI IN AV output terminals S-video input terminal AV2 input terminals HDTV input terminals S-video input termin
Inhaltszusammenfassung zur Seite Nr. 6
Function Buttons of the Remote Control Function buttons of the remote control Mute button TV/AV •��� To eliminate the sound of the programs DC standby and power button TV and AV exchange button DV SNAPSHOT SCAN CALL A changeover between TV and other input signals like AV I/II select button DV button Screen call button Snapshot button Program scan button Direct select button SWAP Select a TV channel directly Digital selection button P.STD S.STD Changeover from one digital, two digital a
Inhaltszusammenfassung zur Seite Nr. 7
The Screen Display Menu For your convenience of operation, here lists the screen display menus of this model as your reference. Sound menu Picture menu PIC. Brightness 50 Treble 50 SOU. Contrast 50 Bass 50 Color 50 Balance 50 Sharpness 50 Sound Effect Hue 0 Surround ON Color Temp. 0 Function menu Tuning menu Language English Prog NO. 008 Color Sys. Auto Skip OFF Prog. S
Inhaltszusammenfassung zur Seite Nr. 8
Switch on/ off the TV set In the following, the methods of using power switch and remote control to switch on/off power supply for the TV set will be explained. Switch on/ off the TV set Switch on/ off the TV set 1.Connect the power supply wire. Then press the power Infrared receiver switch button, the power indicator will light, in several seconds the picture will display on the screen. 2. If the TV is in the state of standby, press the POWER button or the CH+/- buttons on the remote co
Inhaltszusammenfassung zur Seite Nr. 9
Watching TV Programs Watching TV programs How to select the TV program Select the desired program 1. Use the direct number selection button Press the button from 0-9 to select a one-figure channel. If you want to select a double figures channel, press the figure-selection button and change it into two-figure mode, then press the number of the channel. If you want to select a three figures channel, press the figure-selection button and change it into three-figure mode, then press the nu
Inhaltszusammenfassung zur Seite Nr. 10
Watching TV Programs (continued) Swap function enables quick swap to the last watched program. Auto scan function enables automatic successive scanning of the programs in memory with "OFF" skip status (There are 12 pictures display on the screen at the same time). Program swap and auto scan functions Program swap 1. Suppose the channel number 18 you used just now is 8 and the B/G 144MHz NORMAL channel number you are using SWAP is 18 (as shown in the figure). 8 B/G 144MHz 2. If you wan
Inhaltszusammenfassung zur Seite Nr. 11
Tuning The TV set has three methods to set the channels, which are Auto search, Search and Fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Auto Search Select the search mode FUNCTION 1. Press the FUNCTION button, the function menu will appear on the screen. Language English Color Sys. Auto Prog. Sort Search Mode Ordinal Amusement FUN. Curtain Mode Off Special 2. Press the C
Inhaltszusammenfassung zur Seite Nr. 12
Tuning (Continued) Search After searching (Continued) Press the CH+/- buttons to check channels. If the colour or sound is abnormal in a certain channel, it may be CH+ because that the colour or sound system has not been set properly, then, you may adjust it to proper system (Refer to page 8). VOL- MENU VOL+ Search CH- 1. Press the CH+/- buttons or Direct 1 B/G select button to select the desired 144MHz NORMAL channel number. TUNE 2. Press the TUNE button, the tuning menu will appear o
Inhaltszusammenfassung zur Seite Nr. 13
Tuning (Continued) Fine Tune Fine Tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. 1. Press the CH+/- buttons or Direct CH+ 1 select button to select the desired B/G 144MHz NORMAL channel number. ( For example, the VOL- MENU VOL+ channel 1.) CH- TUNE 2. Press the TUNE button, the tuning menu will appear on the screen. 3. Press the CH+/- buttons to Prog NO. 008 Skip OFF move the indicator to " Fine Tune ". Sou
Inhaltszusammenfassung zur Seite Nr. 14
Tuning (Continued) Skip unnecessary channel Skip unnecessary channel The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control. CH+ 1. Press the CH+/- buttons or Direct 1 select button to select the desired B/G MENU VOL- VOL+ 144MHz NORMAL channel number. ( For example, the channel 1.) CH- TUNE 2. Press the TUNE butto
Inhaltszusammenfassung zur Seite Nr. 15
Tuning (Continued) Exchange Programs Exchange Programs This feature enables TV programmes that may be on a wrong program number to be moved to another number. This feature is very useful when Automatic Search Tuning has been used because programmes are stored in the order they are found, which is usually FUNCTION not the desired order. When organising, it is best to start from the lowest programme number first. 1. Press the TUNE button, the tuning menu will appear on the screen, then Language
Inhaltszusammenfassung zur Seite Nr. 16
Convenient Picture and Sound Controls Select the picture modes and set the picture quality How to select the picture modes You can quickly select the desired picture NORMAL mode from four preset modes and one customized mode. P.STD SOFT Press the P.STD button to select the desired picture quality. Five kinds of picture modes PIC MUTE (i.e., ", " NORMAL","SOFT" ,"PIC MUTE PERSONAL "PERSONAL","BRIGHT", ) can be selected in turn. BRIGHT MODE PICTURE QUALITY Medium color and brightness NOR
Inhaltszusammenfassung zur Seite Nr. 17
Convenient Picture and Sound Controls (Continued) Select the sound modes and set the sound quality How to select the sound modes You can quickly select the desired sound THEATER mode from four preset modes and one S.STD customized mode. PERSONAL Press the S.STD button to select the desired picture quality. Five kinds of sound modes MUSIC (i.e., "THEATER" ,"PERSONAL","MUSIC", NORMAL " NORMAL"," SPEECH", ) can be selected in turn. SPEECH Mode Sound quality THEATER Suitable for rich and f
Inhaltszusammenfassung zur Seite Nr. 18
Convenient Picture and Sound Controls (Continued) Surround effect chip has been employed to form a vivid and real space surround sound effect. Sound Effect, Surround and Mute functions Sound Effect function SOUND There are Stereo, V.SRS and MONO sound effect for the TV set. You may select the desired option. 1. Press the SOUND button, the Sound menu will appear on the Treble 50 screen. SOU. Bass 50 Balance 50 . Press the CH+/- buttons
Inhaltszusammenfassung zur Seite Nr. 19
Time Set Up Function This model has time set function such as On/Off Time, Sleep and Remind Time, etc. When the Child Lock is working, On Time and Remind Time function cannot be used. Clock and On/Off Time functions Set clock When this function is used, please first check whether the clock is in accordance with your local time; if not, you can follow the instructions to adjust it. TIME 1. Press the TIME button, the Time menu will appear on the screen. TIME . Press the CH+/-
Inhaltszusammenfassung zur Seite Nr. 20
Time Set Up Function(continued) Sleep and Remind Prog. Functions Sleep function The TV set have 18 sections option for sleep timer function (each section has a time interval of 10 minutes). TIME 1. Press the TIME button, the TIME Time menu will appear on the Clock 18:18 screen. On Time 18:00 On Prog. 008 . Press the CH+/- buttons to move Off Time --:-- the indicator to " Sleep ", then press Sleep 120 CH+ Remind Time --:-- the VOL-
