Inhaltszusammenfassung zur Seite Nr. 1
USER MANUAL
5115DVD
51 cm TV / DVD Combination
Please read this manual carefully before using
this TV set and keep it for future reference.
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS Before Operation Safety and precautions ........................................................................ 1 Installation ............................................................................................. 2 Aerial Connections .............................................................................. 2 Preparation of the remote control ........................................................ 2 Function buttons and external sockets .................................
Inhaltszusammenfassung zur Seite Nr. 3
Safety and Precautions To ensure safe and reliable operation of the TV set, please observe the following precautions, operation and maintenance. Attention: 1. Pay attention to the power supply cord before installing the TV set. Do not hang anything on the cord, and avoid treading on the cord. 2. The slots on the housing are designed for ventilation to ensure reliable operation of the TV set and prevent overheating. They must never be blocked. The TV set must not be placed near a heat source or i
Inhaltszusammenfassung zur Seite Nr. 4
Installation 1. First read carefully the relevant instructions in "Safety and Precaution". 2. place the TV set in a place where there in no direct sunlight on it. Any light reflecting from the screen will cause fatigue of your eyes. 3. Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~7 times the screen height. 4. Keep a space of 10cm or over between the TV set and wall for good ventilation. 5. Never put the TV set in a place with excessive temperature or
Inhaltszusammenfassung zur Seite Nr. 5
Function Buttons and External Sockets Front panel of the TV set TV/DVD Channel Position Signal Receiver Switching Menu Volume up/down up/down REMOTE TV/DVD MENU --VOLUME-- -PROGRAM- SENSOR POWER VIDEO L - AUDIO - R OPEN/CLOSE PLAY/PAUSE STOP SKIP Open/close Play/Pause Stop the DVD the DVD Power Switch Video L/R Audio Rear panel of the TV set COAXIAL COAXIAL Video output terminal Antenna input socket Audio right channel output terminal OUT Video Input terminal Audio left channel output terminal
Inhaltszusammenfassung zur Seite Nr. 6
Using the Remote Control Buttons on the remote control Stand By DVD Open/close POWER CALANDER TIME OPEN/CLOSE Calander Scan SCAN SWAP CALL MUTE TV Time Menu Mute Former Program 1 2 3 4 Call Screen Display Program Number 5 6 7 8 TV/AV (Not Available) TV/AV Exchange 9 -/ -- 0 TV/DVD Digital Selector TV/DVD P + Volume/Channel Selection MENU MENU V - V + Exit Screen Mode EXIT P.STD Picture Mode P - DVD STOP STOP SETUP PAUSE/STEP (Not Available) DVD SETUP REV FWD PREV NEXT DVD PAUSE/STEP DVD FAST RE
Inhaltszusammenfassung zur Seite Nr. 7
Switching On/Off the TV Set This section explains the use of the power button and remote handset to turn your unit on and off. Switching on/ off the TV set Switching on/off the TV set 1 Press the AC power switch on the front of the TV. The power indicator will light. 2 If the indicator is lighting in red press the button on the remote control. Note: 1 When you can't operate the TV set with remote control, you can turn it on by pressing the P+/- buttons on the TV set (Child Lock must be turne
Inhaltszusammenfassung zur Seite Nr. 8
Watching TV You can watch a TV program on a channel which has been tuned to a broadcast. Watching TV programs How to select a TV program Select the desired programs 1 Using number buttons Directly enter the channel number with the numeric keypad on the remote control. 1 2 3 4 To select channel numbers between 10 ~ 99 press [-/--] button and enter the two digit channel number. 5 6 7 8 To select channel numbers between 100 ~ 218 press [-/--] button 9 0 twice and enter the 3 digit
Inhaltszusammenfassung zur Seite Nr. 9
Watching TV (continued) Press the SWAP button to select the channel you were watching previously. Auto scan function scans through all programs in memory including those with "skip" set to "off" (see "Program skip" on page 13). Program swap and auto scan functions Program swap Press the SWAP button to 18 select the channel you were AUTO watching previously. BG SWAP 8 AUTO BG 18 AUTO BG Auto program scan 1 SCAN 1 Press the SCAN button to AUTO scan through all the memorised BG SCAN TV prog
Inhaltszusammenfassung zur Seite Nr. 10
Searching Channels This TV set has three methods to set the channels, which are respectively full automatic, semi automatic and manual fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Full automatic mode Automatic search 1 Press the MENU button. The MAIN MENU will appear with the TUN PlC (picture) icon flashing. Press the MENU button a further 3 times PROG NO ORGANISE until the TUN (tuning) icon
Inhaltszusammenfassung zur Seite Nr. 11
Searching Channels (continued) Semi-automatic search Semi-automatic search 1 Press the P+/- buttons or the. 1 PROGRAMME NUMBER (0-9) AUTO to choose the desired channel BG P+ (e.g. Channel 1). MENU V- V+ 2 Press the MENU button. The MAIN MENU will appear with the PlC (picture) icon flashing. Press the MENU button P- a further 3 times until the TUN (tuning) icon is flashing. Press P-to enter the TUNING menu. 3 Press the P+/- buttons to TUN select "SEARCH". PROG NO ORGANISE SEARCH P+ FINE TUNE A
Inhaltszusammenfassung zur Seite Nr. 12
Searching Channels (continued) Manual fine tune Manual fine tune If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this feature unless reception is poor. 1 1 Press the P+/- buttons or AUTO PROGRAM NUMBER (0-9) BG button to choose the desired channel (e.g. channel 1). P + 2 Press the MENU button. The MAIN MENU will appear MENU V - V + with the PlC (picture) icon flashing. Press the MENU button a further 3 times until the TUN (tuning) icon is P - flashing. Press
Inhaltszusammenfassung zur Seite Nr. 13
Searching Channels (continued) Programme skip Program skip Channels can be set so that they are skipped during program selection. 1 Press the P+/- buttons or 1 AUTO PROGRAM NUMBER (0-9) P + BG button to choose the desired channel (e.g. channel 1). MENU V - V + P - 2 Press the MENU button. The MAIN MENU will appear with the PlC (picture) icon flashing. Press the MENU button a further 3 times until the TUN (tuning) icon is flashing. Press P- to enter the TUNING menu. 3 Press the P+/- buttons to
Inhaltszusammenfassung zur Seite Nr. 14
Convenient Picture & Sound Control Functions Multiple picture modes How to select picture modes You can quickly select the desired picture mode from STANDARD four preset modes and one customised mode. P.STD Press the P.STD button to select the desired RICH picture quality. Five kinds of picture modes (i.e., "STANDARD", "RICH", "USER", "LISTEN", USER "SOFT") can be selected in turn. LISTEN The 5 modes are Listen - This is a new feature that blacks out SOFT the TV screen when listeni
Inhaltszusammenfassung zur Seite Nr. 15
Convenient Picture & Sound Control Function (continued) Black Stretch Automatically increases the contrast range Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception) Black stretch and noise reduce How to select BLACK STRETCH 1 Press the MENU button. The MAIN MENU will appear with the PlC (picture) icon flashing. Press BACKGROUND the MENU button a further 2 ON BLACK STRETCH NOISE REDUCE times until the FUN (function) FADE P + icon is flashing. Press P- to AVL ente
Inhaltszusammenfassung zur Seite Nr. 16
Convenient Picture & Sound Control Functions (continued) Mute and Fade Sound mute 1 Press the MUTE button on the MUTE remote control to turn off the MUTE sound. MUTE will appear on the top left of the display. 2 Press MUTE again to turn the sound back on. Fade When FADE is turned on, the TV will protect the tube by fading the picture in when the TV is switched on, and fading the picture out when the TV is switched off. 1 Press the MENU button. P + The MAIN MENU will appear with the PlC (picture
Inhaltszusammenfassung zur Seite Nr. 17
Time Functions Clock setting and timer on/off functions Clock setting The clock will only work if the TV set if left turned on or in standby. When the set is disconnected from the TIME power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected. 1 Press the TIME button, and the TIME menu appears on P + the screen. TIME CLOCK 17:18 2 Press the P+/- buttons select 18:00 MENU ON TIME V - V + ON PROG 1 "CLOCK", t
Inhaltszusammenfassung zur Seite Nr. 18
Timer Functions (continued) Sleep timer and program preset Sleep timer The sleep timer switches the set 0 to stand-by after the sleep time TIME 10 has elapsed. Sleep time can be set in 10 minute intervals up to 20 180 minutes, as shown in the illustration. Setting the sleep 170 time to zero turns off the sleep timer. 180 1 Press the TIME button, and the P + TIME menu appears on the screen. MENU V - V + TIME 2 Press the P+/- buttons to CLOCK 17:18 select "SLEEP TIMER". ON TIME 18:00 8 ON PROG P
Inhaltszusammenfassung zur Seite Nr. 19
Set Up Functions Screen saver and Calendar How to start screen saver function When the background NO SIGNAL function is ON a bouncing 'NO SIGNAL' will be displayed on a blue back ground. P + 1 Press the MENU button. The MAIN MENU will appear MENU V - V + with the PlC (picture) icon flashing. Press the MENU button a further 2 times until the FUN (function) icon is P - flashing. Press P- to enter the FUNCTION menu. 2 Press the P+/- buttons to select BACKGROUND. Then press V+/- to turn the BACKGRO
Inhaltszusammenfassung zur Seite Nr. 20
Set Up Functions (continued) AVL AVL function Automatic Volume Level control reduces the effect of large volume changes. For instance, when advertisements come on. 1 Press the MENU button. The MAIN MENU will appear with the PlC P + BACKGROUND (picture) icon flashing. BLACK STRETCH ON Press the MENU button NOISE REDUCE MENU V - V + a further 2 times until the FADE FUN (function) icon is AVL flashing. Press P- to enter P - the FUNCTION menu. 2 Press the P+/- button to P+ select "AVL". MENU V- V+
