Inhaltszusammenfassung zur Seite Nr. 1
Wireless TV Link SLV3220
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
A 1 2 3 4 5 WIRELESS 1 2 SOURCE SLV3220 WIRELESS TVLINK TRANSMITTER SOURCE 1 SOURCE 2 PICTURE IR R AUDIO L VIDEO CHANNEL DC 9V 1 2 3 4 10 9 8 7 6 12 13 14 B WIRELESS SLV3220 WIRELESS TVLINK RECEIVER SOURCE PICTURE CHANNEL DC 9V 1 2 3 4 17 16 15 19 20 20 F WIRELESS WIRELESS
Inhaltszusammenfassung zur Seite Nr. 3
EN Contents Page Overview 4 Control and display elements 4 Your Wireless TV Link 5 Safety 5 Installation 6 Operation 7 Enjoy your Wireless TV Link 7 Troubleshooting 9 Information 11 Information 11 Maintenance and service 11 Recycling and disposal 11 Warranty 12 Glossary 12 3
Inhaltszusammenfassung zur Seite Nr. 4
EN Overview Control and display elements A Transmitter 1 Integrated remote control blaster light 2 On/off switch 3 Power light: > red: standby > green: on 4 TV2 source indicator 5 SOURCE button 6 Power input connector (DC 9V) 7 Wireless channel selection switch 8 SOURCE 2 connectors (red/white/yellow) 9 SCART cable 10 Remote control blaster cord port B Receiver 12 Integrated remote control blaster light 13 On/off switch 14 Power light: > red: standby > green: on 15 Power input connector (DC 9V)
Inhaltszusammenfassung zur Seite Nr. 5
EN Your Wireless TV Link You can say good-bye to wires. With your Wireless TV Link you can now wirelessly connect a second TV and choose between two devices to watch on your second TV. Safety • Read the instructions in this manual carefully before you connect, install and use the product. � Keep this manual for future reference. � The product is for indoor use only. � Do not use the product close to water. � Do not expose the product to extreme heat. � In case of technical difficulties, do n
Inhaltszusammenfassung zur Seite Nr. 6
EN Installation For basic installation, see the quick start guide that came with your Wireless TV Link. Install the remote control blaster cord 1 Switch off the transmitter (A). 2 Connect the remote control blaster cord (F) to the IR socket. 3 Position the blaster light in front of the IR sensor of the video source. See the user manual of the video source for the exact location of the IR sensor on the front panel. 4 Switch on the transmitter (A). 5 Take the remote control of a video sourc
Inhaltszusammenfassung zur Seite Nr. 7
EN Installation Remove interference on TV2 1 Find the PICTURE CHANNEL switch on the transmitter (A). 2 Set the PICTURE CHANNEL switch to a different number. 3 Find the PICTURE CHANNEL switch on the receiver (B). 4 Set the PICTURE CHANNEL switch to the same number as on the transmitter (A). Operation Enjoy your Wireless TV Link For basic operation, see the quick start guide that came with your Wireless TV Link. Watch a cable TV program on TV2 Your VCR or DVD recorder needs to be connected
Inhaltszusammenfassung zur Seite Nr. 8
EN Operation 3 Press SOURCE on the transmitter to select the VCR or DVD recorder. 1 2 SOURCE 4 Take the remote control of the VCR or DVD recorder with you. 5 Go to TV2. 6 Switch on TV2. 7 Switch on the receiver 8 Select the channel on the VCR or DVD recorder with its remote control. Turn off the auto standby mode when you use the VCR or DVD recorder to watch a cable tv program. Refer to the user manual of the VCR or DVD recorder. If the VCR or DVD recorder records a television program, y
Inhaltszusammenfassung zur Seite Nr. 9
EN Troubleshooting Problem Tip No image or � Make sure video sources are con- wrong image on nected to the transmitter (A). � Make sure the transmitter (A) is TV1 connected to TV1. � Make sure SCART cables are firmly inserted. � Make sure the video source is switched on. � Make sure the correct SCART input on TV1 is selected. No image or � Make sure SCART cables are wrong image on firmly inserted. � Make sure the receiver (B) is con- TV2 nected to TV2. � Make sure both receiver (B) and tra
Inhaltszusammenfassung zur Seite Nr. 10
EN Troubleshooting Problem Tip Interference on � Slightly change the position of the the image of TV2. receiver or the transmitter. � Change the wireless channel that is used for communication. See page 7. � The receiver (B) is out of range of the transmitter (A). The number of walls and ceilings in between the receiver (B) and transmitter (A) restrict the distance. The video sources � Point the remote control directly do not respond to to the receiver. � Replace the batteries of the th
Inhaltszusammenfassung zur Seite Nr. 11
EN Information Health and safety The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. The quality of the image can be influenced by the use of microwave ovens. Other wireless systems (Bluetooth, wireless networks etc.) can also have influence on the quality of the image. The product is based on RF technology. Therefore the product can suffer from the same kinds of interference as GSMs, portable radios and o
Inhaltszusammenfassung zur Seite Nr. 12
EN Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer. Glossary CVBS Video standard for showing colors on a TV. Easylink Gives a VCR or DVD recorder the possibi
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
Need help? Troubleshooting See page 9 Online help: www.philips.com/support Helpline België/Belgique/Belgien 070 222 303 (€ 0.17) Danmark 3525 8759 Deutschland 0900 1101211 (€ 0.12) España 902 888 784 (€ 0.15) France 08 9165 0005 (€ 0.23) ÅëëÜäá 0 0800 3122 1280 Ireland 01 764 0292 Italia 899 23 45 06 (€ 0.25) Luxemburg/Luxembourg 40 6661 6544 Nederland 0900 8407 (€ 0.20) Norge 2270 8111 Österreich 0900 060 827 (€ 0.20) Portugal 2 1359 1442 Schweiz/Suisse/Svizzera 0900 001 600 Suomi 0600 412 001
