Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR This symbol is intended to alert the user to the BACK). NO USER-SERVICEABLE presence of important operating and maintenance (servicing) instructions in the PARTS IN
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should connection to grounding electrodes, and requirements for the be read before the product is operated. grounding electrode. See Figure 1. 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions sho
Inhaltszusammenfassung zur Seite Nr. 5
FOR YOUR SAFETY Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug. U.S.A : To prevent electric shock, match wide blade of plug to wide slot, fully CAUTION and 120 V insert. CANADA : Pour éviter chocs électriques, introduire la lame la plus large de la ATTENTION fiche dans la borne correspondante de la prise et pousser jusqu’ au fond. The available p
Inhaltszusammenfassung zur Seite Nr. 6
CONTENTS Introduction • READ THIS BEFORE OPERATING YOUR UNIT | 2 • SAFETY INSTRUCTIONS | 3 • ACCESSORIES | 5 Part Names and Functions • FRONT PANEL | 6 • BACK PANEL | 6 • REMOTE CONTROL | 6 • REMOTE CONTROL OPERATION RANGE | 7 • LOADING BATTERY | 7 System Connections • CONNECTING TV AND THE SOURCE EQUIPMENT WITH COMPONENT VIDEO OUTS | 8 • CONNECTING TV AND THE SOURCE EQUIPMENT WITH HDMI OUTS | 10 • CONNECTING MULTI-ROOM SYSTEM KIT | 11 Operations
Inhaltszusammenfassung zur Seite Nr. 7
Part Names and Functions FRONT PANEL 1. POWER (ON/STANDBY) button 3. Remote sensor Each time the POWER button is pressed, this unit is This receives the signals from the remote control unit. turned on to enter the operating mode or off to enter the standby mode. 4. HDMI1, 2 and AV Indicators Each time the INPUT selector button is pressed, the 2. STANDBY Indicator corresponding indicator lights up. In the standby mode, the STANDBY indicator lights up. 5. INPUT selector button Press this bu
Inhaltszusammenfassung zur Seite Nr. 8
REMOTE CONTROL OPERATION RANGE • Use the remote control unit within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. LOADING BATTERY Remove the cover. Load the battery(CR2025) matching the polarity. 1 2 • Remove the battery when it is not used for a long time. 7
Inhaltszusammenfassung zur Seite Nr. 9
System Connections • Do not plug the AC input cord into the wall AC outlet until all connections are completed. • Be sure to observe the color coding when connecting component cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to this unit. • The supplied cord is a HDMI cord only. Other cords are commecially available cords. 1. CONNECTING TV AND THE SOURCE EQUIPMENT WITH COMPONENT VIDEO OUTs 8
Inhaltszusammenfassung zur Seite Nr. 10
Connecting the source equipment with the COMPONENT VIDEO OUTs • When you connect the COMPONENT VIDEO OUTs of the source equipment to this unit, this unit can convert the component video signals to the digital video signals and output them from the HDMI OUT connector of this unit. • In addition, when you connect the OPTICAL OUT to this unit, this unit can output the digital signals as they were input from the HDMI OUT connector, too. • When making the component video connections, connect "Y" t
Inhaltszusammenfassung zur Seite Nr. 11
2. CONNECTING TV AND THE SOURCE EQUIPMENT WITH HDMI OUTs Note 1: When the HDMI OUT connector of the source equipment is connected to this unit, the OPTICAL OUT of this unit can output the same digital audio signals that are input into the HDMI IN 1 or 2 connector. In such a case, if the DVI IN connector of the display equipment is connected to the HDMI OUT connector of this unit, you should connect the OPTICAL OUT jack to the OPTICAL IN jack of the display equipment(or A/V amp, receiver). How
Inhaltszusammenfassung zur Seite Nr. 12
3. CONNECTING MULTI-ROOM SYSTEM KIT • The multi-room system kit(sold separately) is essential for operation from a remote location. For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com. • IR IN jack allows you to control this receiver from another room with the remote control unit. • To control this unit from another room with the remote control unit, connect the IR IN jack to the output of the connecting block. • If this unit is l
Inhaltszusammenfassung zur Seite Nr. 13
Operations Select the desired input source. Turn the power on. 2 1 • Each time the "INPUT" button on the front panel is pressed, the input source changes as follows; • Each time the POWER(ON/STANDBY) button on the front panel is pressed, this unit is turned on to HDMI 1 HDMI 2 AV enter the operating mode (the STANDBY indicator lights up in bule) or off to enter the standby mode (the STANDBY indicator lights up in red). • On the remote control, press the POWER ON • Each time t
Inhaltszusammenfassung zur Seite Nr. 14
Definition of Terms HDMI Component Video HDMI(High Definition Multimedia Interface) is a new Video signals with three channels of separate connection format that supports both video and audio information that makes up the picture. There are on a single digital connection. some types of component video, such as The HDMI connection carries uncompressed, Y/CB(PB)/CR(PR) and R/G/B. standard or high definition digital video signals and multi-channel audio signals to AV components such Dolby Digital
Inhaltszusammenfassung zur Seite Nr. 15
Troubleshooting Guide If a fault occurs, run through the table below before taking your unit for repair. If the fault persists, attempt to solve it by switching the unit off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you attempt to repair the unit yourself. This could void the warranty. HDMI troubleshooting • This unit has been designed to be compliant with HDMI(High Definition Mutimedia Interface) version 1.1. Depending on the com
Inhaltszusammenfassung zur Seite Nr. 16
Specifications • Digital input/output level Optical, 660 nm | -21~ -15 dBm • Component video input sensitivity, 75 Ω (75% color bar) R-Y signal | 0.5 Vp-p B-Y signal | 0.5 Vp-p Y signal | 1.0 Vp-p • HDMI | 19 pin Picture resolution | 480p(576p), 720p, 1080i Audio sampling frequency | 32, 44.1, 48, 96, 192kHz • Power supply U.S.A. and Cannada | 120 V ~ 60 Hz China, Europe, Australia and other countries | 220- 240 V ~
