Inhaltszusammenfassung zur Seite Nr. 1
OPERATOR’S MANUAL
18 VOLT HEDGE TRIMMER
P2601
ACCEPTS ALL ONE+ BATTERY PACKS
BATTERIES AND CHARGERS SOLD
SEPARATELY
Your hedge trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE T
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Introduction ..................................................................................................................................................................... General Safety Rules ....................................................................................................................................................... 3 Specific Safety Rules ...............................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
GENERAL SAFETY RULES Keep hands, face, and feet at a safe distance from moving parts. Do not touch or try to stop the cutting blades when WARNING! they are moving. Read and understand all instructions. Failure to follow Do not use tool if switch does not turn it on or off. A tool all instructions listed below may result in electric shock, that cannot be controlled with the switch is dangerous fire, and/or serious personal injury. and must be repaired. Avoid accidental starting. Be
Inhaltszusammenfassung zur Seite Nr. 4
SPECIFIC SAFETY RULES Before starting the hedge trimmer, make sure the blade MODEL BATTERY PACK CHARGER (P113) is not in contact with any object. (P104 Li-ion) Stop the unit, remove the battery pack, and make sure 13049001 , 1304900 140501001 the blade has stopped before setting the unit down. 130155001 140501005 Never cut any material with a diameter larger than (P100 Ni-Cd) 3/8 in. P601 13055004, 13040 8 DANGER: Risk of cut. Keep hands away from blades. Do BATT
Inhaltszusammenfassung zur Seite Nr. 5
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power hrs Hours Time Alternating Current Type of current Direct Current Type or a characteristic of current n o No Load Speed Rotational speed, at no load Class II Construction Double-insula
Inhaltszusammenfassung zur Seite Nr. 6
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will result in death DANGER: or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result in death WARNING: or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may result in minor or CAUTION moderate injury. (W
Inhaltszusammenfassung zur Seite Nr. 7
FEATURES PRODUCT SPECIFICATIONS Cutting Capacity........................................................ 3/8 in. Motor ......................................................................18 V DC Net Weight ............................................................... 4.8 lbs. Blade Length .............................................................. 18 in. SCABBARD FROnT hAnDLE GUARD LOCk-OFF BUTTOn BLADES ® GripZone OVERMOLD TRIGGER SITC w h Fig. 1 SCABBARD KNOW YOUR HEDGE TRIMMER See Fig
Inhaltszusammenfassung zur Seite Nr. 8
ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled. If any parts are damaged or missing do not operate this Carefully remove the product and any accessories from product until the parts are replaced. Failure to heed this the box. Make sure that all items listed in the packing list warning could result in serious personal injury. are included. Inspect the product carefully to make sure no breakage or damage occurred during shipping. WARNING: Do not discard
Inhaltszusammenfassung zur Seite Nr. 9
OPERATION TO INSTALL BATTERY PACK See Figure 2. Place the battery pack in the hedge trimmer. Align the BATTERY raised rib on the battery pack with groove in the hedge BATTERY PACk PORT trimmer’s battery port. Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the hedge trimmer before beginning operation. CAUTION: When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the tool and
Inhaltszusammenfassung zur Seite Nr. 10
OPERATION OPERATING TIPS See Figures 5 - 6. DANGER: If blade jams on any electrical cord or line, DO NOT TOUCH THE BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS. Continue to hold the hedge trimmer by the insulated rear handle or lay it down and away from you in a safe manner. Disconnect the electrical service to the damaged line or cord before attempting to free the blade from the line or cord. Failure to heed this warning will result in serious personal injury or possible de
Inhaltszusammenfassung zur Seite Nr. 11
MAINTENANCE WARNING: WARNING: When servicing, use only identical replacement parts. Use Do not at any time let brake fluids, gasoline, petroleum- of any other parts may create a hazard or cause product based products, penetrating oils, etc., come in contact damage. with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. Only the parts shown on the parts list are intended to be repaired WARNING: or replaced by the customer. All other pa
Inhaltszusammenfassung zur Seite Nr. 12
MAINTENANCE WARNING: BLADE Blades are sharp. When handling the blade assembly, COVER wear non-slip, heavy-duty protective gloves. Do not place SCREwS your hand or fingers between blades or in any position where they could get pinched or cut. NEVER touch blades or service unit with battery pack installed. REPLACING BLADES See Figures 7 - 8. Periodically inspect the blades for damage and wear. Always BLADE COVER use the manufacturer’s specified replacement blades. Removing the blade: Remo
Inhaltszusammenfassung zur Seite Nr. 13
MAINTENANCE LUBRICATING THE BLADE See Figure 9. For easier operation and longer blade life, lubricate the hedge trimmer blade before and after each use. Remove the battery pack from the hedge trimmer. Lay the hedge trimmer on a flat surface. Apply light weight machine oil along the edge of the top blade. If you will be using the hedge trimmer for an extended period, it is advisable to oil the blade during use. NOTE: Do not oil while the hedge trimmer is running. Stop the hedge trimmer
Inhaltszusammenfassung zur Seite Nr. 14
MAINTENANCE CLEANING THE HEDGE TRIMMER Slide the scabbard over the blade. Remove the battery pack. Clean dirt and debris from the body of the hedge trimmer, using a damp cloth with a mild detergent. NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents SCABBARD such as kerosene. Moisture can cause a shock hazard. Wipe off any moisture with a soft dry cloth. Use a small b
Inhaltszusammenfassung zur Seite Nr. 15
WARRANTY LIMITED WARRANTY STATEMENT A. Tune-ups – Spark Plugs, Carburetor, Carburetor Adjustments, Ignition, Filters Techtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI® brand outdoor B. Wear items – Bump Knobs, Outer Spools, Cutting product is free from defect in material and workmanship Lines, Inner Reels, Starter Pulleys, Starter Ropes, Drive and agrees to repair or replace, at Techtronic Industries Belts, Tines, Felt Washers, Hitch
Inhaltszusammenfassung zur Seite Nr. 16
OPERATOR’S MANUAL 18 VOLT HEDGE TRIMMER P2601 • PARTS AND SERVICE Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the product data plate. P601 • MODEL NUMBER • SERIAL NUMBER • HOW TO OBTAIN REPLACEMENT PARTS: Replacement parts can be purchased online at www.ryobitools.com or by calling 1-800-860-4050. Replacement parts can also be obtained at one of our Authorized Service Centers. • HOW TO LOCATE AN AUTHORIZED SERVICE CEN
