Bedienungsanleitung Bogen Communicationscs1ez

Inhaltszusammenfassung zur Seite Nr. 1

TM
Easy Design Speaker
Model CS1EZ
Speaker Layout
The layout of the speakers should be planned before installation
begins. Layout starts in one corner of the room. The first speaker
should be positioned from each wall a distance approximately equal
to the ceiling height of the room.
The next speaker in row 1 should be spaced a distance approxi-
mately equal to twice the height of the ceiling. Each additional speak-
er in the row should use this same spacing.
Row 2 starts at twice the ceiling hei

Inhaltszusammenfassung zur Seite Nr. 2

Speaker Installation STEP 1 - Remove the tile from ceiling and center the TB8 STEP 4a - If not using RE84 Recessed Enclosure: tile bridge on the back. Use the tile bridge to trace out, Make the electrical connections using the 2 screw terminals and then cut an 8-1/2” square hole. on the CS1EZ. The suggested amplifier connections are: NOTE: It is sometimes more efficient to stack up 70V terminal - 70V HOT a number of ceiling tiles and then cut the speaker COM terminal - 70V COMMON opening in a nu