Bedienungsanleitung Husqvarna 500CT

Inhaltszusammenfassung zur Seite Nr. 1

EASICUT
500CT
For all customer enquiries or for replacement parts, contact:-
☎ ☎ 0870 609 1901
www.flymo.com
customer.services@husqvarna.co.uk
IMPORTANT INFORMATION
Read before use
& retain for future reference

Inhaltszusammenfassung zur Seite Nr. 2

Carton Contents Switch Levers Handguard instruction manual blade cover Battery Pack Charger Cradle Charger IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna Outdoor Products Customer Service Department direct Telephone : 0870 609 1901 Fax : 0870 609 1902 Safety If not used properly this Hedgetrimmer can be dangerous! This Hedgetrimmer can cause serious injury to the operator and others, the warnings a

Inhaltszusammenfassung zur Seite Nr. 3

General shoes. The use of safety glasses is recommend- 1. Never allow children or people unfamiliar with ed. Do not wear loose clothing or jewellery which these instructions to use the product. Local reg- can be caught in moving parts. ulations may restrict the age of the operator. 2. Thoroughly inspect the area where the product 2. Only use the product in the manner and for the is to be used and remove all wires and other for- functions described in these instructions. eign objects. 3. Never

Inhaltszusammenfassung zur Seite Nr. 4

Assembly A Assembly of Handguard. 1. Insert Handguard into slot as illustrated in figure A, ensuring that it is securely locat- ed. DO NOT USE THE PRODUCT WITH- OUT FITTING THE HANDGUARD Charging the Battery A Initial Charging Procedure 1. Use the charger indoors only. 2. Ensure the charger is not exposed to mois- ture. Keep the charger and the product dry at all times. 2 3. Connect the charger cable to the Charger Cradle (A1). and plug the Charger into a suitable household electrical wall s

Inhaltszusammenfassung zur Seite Nr. 5

Starting and Stopping D Before starting your Hedgetrimmer. 1. Remove blade cover (D). E To start your Hedgetrimmer 1. There are two switch levers fitted to your Hedgetrimmer. 2. Both switch levers need to be held in the operating position (See Fig E) for the product to start. F To stop your Hedgetrimmer • Move Hedgetrimmer away from cutting area before stopping. 1. To stop, release one of the switch levers.(Fig F) How to Use How to Use your Hedgetrimmer G 1. Inspect area to be cut before each

Inhaltszusammenfassung zur Seite Nr. 6

Caring for your Hedgetrimmer Cleaning (J) J 1. Using a soft brush - remove debris from all air intakes and cutting blade. 2. Wipe over surface of your hedgetrimmer with a dry cloth. • IMPORTANT Never use water for cleaning your hedgetrim- mer. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts. Lubricating the Cutting Blade For easier operation and longer life, lubricate the cutter blades before and after use. Apply the oil so that it runs betw

Inhaltszusammenfassung zur Seite Nr. 7

Guarantee & Guarantee Policy If any part is found to be defective due to faulty manu- this Operator's Manual and understand how to operate facture within the guarantee period, Husqvarna Outdoor and maintain your machine: Products, through its Authorised Service Repairers will Failures not covered by guarantee effect the repair or replacement to the customer free of * Replacing worn or damaged blades * Failures as a result of not reporting an initial fault. charge providing: (a) The fault is repo