Bedienungsanleitung AutoTek ATX1615

Inhaltszusammenfassung zur Seite Nr. 1

Inhaltszusammenfassung zur Seite Nr. 2

a utotek ATX SERIES CAR AUDIO SUBWOOFERS Congratulations on your purchase of the new Autotek ATX Series High Power subwoofer system. The ATX subwoofer series offer superior sonic accuracy, intense high power sound quality with exotic build materials and outstanding good looks. These subwoofers are ideal for high power listening levels as well as high SPL competition. 3” DVC 2-Ohm High-Temp Black Aluminum Former 1” Tall Roll Polyester Foam Surround For Long Excursion Large Air Cooled 160 oz.

Inhaltszusammenfassung zur Seite Nr. 3

SUBWOOFER INSTALLATION AND WIRING DIRECTIONS Enclosure Materials Typically, 5/8” or 3/4” MDF (Medium Density Fiber Board) is best for most applications. 3/4” MDF is recommended. Enclosure Build Materials Connecting joints need to be glued and screwed to ensure no air escapes and joints do not separate under high pressure. Mitered and rabbit joints also help to ensure the enclosure joints are secure. Bracing Internal bracing is also recommended to prevent flexing and to strengthen the enclosure.

Inhaltszusammenfassung zur Seite Nr. 4

3

Inhaltszusammenfassung zur Seite Nr. 5

Glossary of Terms Q The energy losses of relative damping (ratio of stored to dissipated energy or ratio of reactive to resistive energy). Fs Free air resonance of driver in Hz. Qms Mechanical Q. Vas Volume of air equivalent to driver from the rest position. Cms Mechanical compliance of a loud speaker piston. Mms Moving mass of total loud speaker piston assembly. Xmax The maximum linear excursion of a loud speaker. Sd Surface area of the cone. Dia The piston diam

Inhaltszusammenfassung zur Seite Nr. 6

+ + + + + + ATX1615 DVC 2-Ohms PARALLEL SERIES + 1-Ohm + - 4-Ohms - PARALLEL COILS / PARALLEL SUBS + .5-Ohms - SERIES COILS / PARALLEL SUBS - + 2-Ohms 5 + + + + + +

Inhaltszusammenfassung zur Seite Nr. 7

ATX1615 Dimensions B C 2” A MODEL A-Cut-Out B-Mounting Depth C-Clearance OLM 1615 14” 8.55” 10.55” NOTE: There must be atleast 2” of clearance from the back of the subwoofer to the enclousre. 6

Inhaltszusammenfassung zur Seite Nr. 8

Maxxsonics Limited Warranty As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase. All other parts and accessories of the system are warrantied to be free from defects in material and workmanship for one (1) year from date of purchase. Maxxsonics will repair or replace at it’s option and

Inhaltszusammenfassung zur Seite Nr. 9