Inhaltszusammenfassung zur Seite Nr. 1
FP101-OM.qxd 7/12/98 09:11 Page 1
FP101
with Pre-Programmed 5+15 Memory
Operating Guide
Feature•Phone Series
Inhaltszusammenfassung zur Seite Nr. 2
FP101-OM.qxd 7/12/98 09:11 Page 2 INTRODUCTION Congratulations on the purchase of your Uniden FP101 Telephone. The FP101 has been designed and engineered to exacting standards for reliability, long life and outstanding performance. To obtain the full benefit from your new telephone, please read this Operating Guide thoroughly. For your future reference, please fill in the panel below and attach your Purchase Receipt/Sales docket. Serial No. Date of purchase (found on the bottom of the unit)
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS FP101-OM.qxd 7/12/98 09:11 Page 3 CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Caring for your Telephone . . . . . . . . . . . . . . . . . . . . . . . . . .6 Parts Ch
Inhaltszusammenfassung zur Seite Nr. 4
FP101-OM.qxd 7/12/98 09:11 Page 4 CONTENTS Accessing Call Waiting (New Zealand Model only) . . . . . . .18 Accessing Call Waiting (Australian Model only) . . . . . . . . . .18 Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Placing a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Music on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Using the Pre-Programmed Feature Buttons (New Zealand Model only) . .
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT INFORMATION FP101-OM.qxd 7/12/98 09:11 Page 5 IMPORTANT INFORMATION When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth
Inhaltszusammenfassung zur Seite Nr. 6
FP101-OM.qxd 7/12/98 09:11 Page 6 IMPORTANT INFORMATION 9. Unplug this product and refer servicing to qualified service personnel under the following conditions: A. If liquid has been spilled into the product. B. If the product has been exposed to rain or water. C. If the product does not operate normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage, and will
Inhaltszusammenfassung zur Seite Nr. 7
PARTS CHECKLIST FP101-OM.qxd 7/12/98 09:11 Page 7 PARTS CHECKLIST (For New Zealand Model) Base Unit Curly Cord Handset Telephone Line Cord Wall Mounting Bracket FP101 with Pre-Programmed 5+15 Memory Operating Guide Feature•Phone Series 2 x Wall Mounting Memory Storage Card Operating Guide Screws and Wall Plugs 7
Inhaltszusammenfassung zur Seite Nr. 8
FP101-OM.qxd 7/12/98 09:11 Page 8 PARTS CHECKLIST (For Australian Model) Curly Cord Base Unit Handset Telephone Line Cord Wall Mounting Bracket and Plug FP101 with Pre-Programmed 5+15 Memory Operating Guide Feature•Phone Series 2 x Wall Mounting Memory Storage Card Operating Guide Screws and Wall Plugs 8 PARTS CHECKLIST
Inhaltszusammenfassung zur Seite Nr. 9
FEATURES FP101-OM.qxd 7/12/98 09:11 Page 9 FEATURES • Pre-Programmed Feature Buttons Instant access to some of Telecom’s / Telstra’s most popular network service features* have been factory programmed into this telephone for your convenience. * Some of these services will require subscription. • 15 One Touch Speed Dial Buttons Your most important numbers can be programmed into the memory, for one touch speed dialing. • Adjustable Ringer Volume and Tone Controls The ringing volume and tone
Inhaltszusammenfassung zur Seite Nr. 10
FP101-OM.qxd 7/12/98 09:11 Page 10 FEATURES • Hearing Aid Compatible Inductive transducer coil handsets provide hearing aid compatibility. • Status LED Bright red LED provides visual indication and differentiation for calls 'In Use' or 'On Hold'. • Call LED Bright red LED provides visual indication of an incoming call. • Pause Button Allows you to store a timed pause in the memory dialing sequence for PABX and Banking Services. • Advanced Build Quality This telephone has been assembled u
Inhaltszusammenfassung zur Seite Nr. 11
FUNCTIONS FP101-OM.qxd 7/12/98 09:12 Page 11 FUNCTIONS NEW ZEALAND MODELS 1. Button 2. Button 6 1 3. Button 2 4. Button 7 5. Button 3 6. One Touch Speed Dial Buttons 4 7. Memory Storage Card 5 AUSTRALIAN MODELS 1. Button 2. Button 6 1 3. Button 2 4. Button 7 3 5. Button 6. One Touch Speed Dial Buttons 4 7. Memory Storage Card 5 NOTE: If required the Memory Storage Card can be turned over to give 20 One Touch memory buttons, as shown below 11
Inhaltszusammenfassung zur Seite Nr. 12
FP101-OM.qxd 7/12/98 09:12 Page 12 FUNCTIONS 16. call LED 8. Button 17. status LED 9. Button 18. Button 10. Button 19. Button 11. Button 20. Not used 12. Handset Retainer Tab 21. tone Slide Switch 13. Button 22. Telephone Line Jack 14. Telephone Number Card 23. ringer Volume Switch (Hi/Med/Low) 15. Numeric Keypad 11 8 9 10 12 13 14 15 20 21 16 17 18 19 22 23 12 FUNCTIONS
Inhaltszusammenfassung zur Seite Nr. 13
INSTALLATION FP101-OM.qxd 7/12/98 09:12 Page 13 INSTALLATION HANDSET CORD CONNECTION Plug one end of the Handset Cord (curly) into the Handset and the other end into the jack on the side of the telephone. TELEPHONE LINE CORD CONNECTION Plug one end of the line cord (straight) into the telephone line jack on the back of the telephone and the other end into the wall outlet. NOTE: Most phone equipment available now use modular jacks. Phone cords are fitted with a molded plastic connector wh
Inhaltszusammenfassung zur Seite Nr. 14
FP101-OM.qxd 7/12/98 09:12 Page 14 INSTALLATION WALL MOUNTING You can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Make sure the wall material is capable of supporting the weight of the Telephone. • Use the screws (supplied) with anchoring devices suitable for the wall material where
Inhaltszusammenfassung zur Seite Nr. 15
USING YOUR FP101 FP101-OM.qxd 7/12/98 09:12 Page 15 USING YOUR FP101 MEMORY DIAL NUMBERS 20 one touch speed dial numbers can be stored into the memory of your telephone. NOTE: There are 5 x Pre-Programmed memories and 15 x One Touch Memories. Each memory location can store a maximum of 32 digits. STORING ONE-TOUCH MEMORIES 1. To program One-Touch Memories ( ~ ). a. Pickup the Handset. b. Press the button. c. Enter telephone number that you want to program. d. Press the button. e. Press the s
Inhaltszusammenfassung zur Seite Nr. 16
FP101-OM.qxd 7/12/98 09:12 Page 16 USING YOUR FP101 PAUSE During the memory storage procedure you may enter a 4 second delay between numbers (for accessing a switchboard, or long distance service) by pressing the button on the Handset at the point in the number sequence you wish to pause. The button counts as one digit. Pressing more than once will increase the length of the pause between numbers. DIALING STORED NUMBERS For example, to dial memory 3 from the telephone 1. Pick up the Handset
Inhaltszusammenfassung zur Seite Nr. 17
USING YOUR FP101 FP101-OM.qxd 7/12/98 09:12 Page 17 USING YOUR FP101 ADJUSTING THE RINGER VOLUME CONTROL While the phone is ringing, you can adjust the ringer volume of your telephone by moving the ringer switch to the desired low/medium/high position. ADJUSTING THE RINGER TONE CONTROL While the phone is ringing, you can adjust the Ringer Tone of your telephone by moving the tone slide control to the desired position. LED indicators 1. call LED indicator: Red light which flashes when the tel
Inhaltszusammenfassung zur Seite Nr. 18
FP101-OM.qxd 7/12/98 09:12 Page 18 USING YOUR FP101 PLACING A TELEPHONE CALL 1. Remove the Handset from the Base. 2. Press the keypad buttons to dial the phone number you want. 3. After you have completed the phone call, place the Handset back on the Base. REDIAL If you want to redial the last number dialed, simply pick up the Handset then press the button. The telephone will automatically redial the last number dialed. RECEIVING A TELEPHONE CALL When the phone rings, pickup the Handset
Inhaltszusammenfassung zur Seite Nr. 19
USING YOUR FP101 FP101-OM.qxd 7/12/98 09:12 Page 19 USING YOUR FP101 MUTE Press and hold down the button to turn off the Handset microphone, allowing private and confidential conversations in the same room without the call- ing party hearing. Release the button again to resume the conversation with the calling party. PLACING A CALL ON HOLD 1. To place a call on hold, press the button. The status LED will flash red and you can hang up. (The Party on Hold will hear music). 2. To begin the conv
Inhaltszusammenfassung zur Seite Nr. 20
FP101-OM.qxd 7/12/98 09:12 Page 20 USING YOUR FP101 Pick up the handset, listen for the dial tone, then press the button. The telephone will automatically dial the access code ‘161’ and will enable ‘immediate call diversion’ to the number you have assigned the divert to. Wait for the ‘confirmation tone’ (long-short-long) and then hang up. To program, or re-program the ‘immediate call diversion’ number assigned to ‘161’ follow the example below, replacing the number 345 6789 with the telepho
