Inhaltszusammenfassung zur Seite Nr. 1
FP099
LCD Display
Caller ID
OWNERS
MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Introduction Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Included in your package. . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Location and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setup Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting Line Cords . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Use a damp (not wet) cloth. Never use abrasive or strong cleaners or solvents. 4. Do not use this product near water; for example, near a bathtu
Inhaltszusammenfassung zur Seite Nr. 4
INTRODUCTION Features Caller display 80 memory caller display Out of area / Private / Repeat indicator NEW CALL light Battery Low indicator Last number redial Last 5 numbers redial FLASH button Message waiting icon (New Zealand Only) Visual ringer Mute button Timer Included in your package 1 - Handset with curly cord and phone base 1 - Telephone line cord To get the most from your phone, please read the 4 - AAA size 1.5V batteries Owner’s Manual thoroughly. 1 - Owner's manual Be sure to complet
Inhaltszusammenfassung zur Seite Nr. 5
LOCATION OF CONTROLS 7 new call AM NEW LOW 9:52 12/30 02 TOTAL CALLS 10 8 dn review up abc def 1 2 3 ghi jkl mno call back del 5 4 5 6 pqrs wxyz tuv 7 8 9 4 0 # mute flash pause 1 3 ring NOTE 10 This unit is not waterproof. ÅTER redial 2 Do not expose this product to rain, water, moisture or any other liquid. 1. mute button 6. call back button 2. redial button 7. new call button 3. pause button 8. review up button 4. flash button 9. review dn button 5. del button 10. Visual ringer 3 9 6
Inhaltszusammenfassung zur Seite Nr. 6
SETUP Battery Installation The Caller ID phone requires four 1.5V AAA size batteries for the LCD display to operate. NOTE 1. Remove the screw and open the battery compartment under the base. Match the + / - symbols in 2. Insert four 1.5V AAA size batteries. the battery compartment 3. Position the batteries in the compartment and replace the with each battery. battery compartment cover. Connecting Line Cords Plug one end of the supplied modular cord into the telephone line wall jack. Then plu
Inhaltszusammenfassung zur Seite Nr. 7
TELEPHONE KEY FUNCTION Ringer Select Switch If you do not wish the phone’s ringer to interrupt you, move the Ringer Selector Switch (located under the base) to OFF. Regular dialling Lift the handset and listen for dial tone. Then enter the telephone number you wish to call. The dialled number will appear on the LCD screen whenever you make a call. Redial function To redial the previous number you called. Lift the handset and press the redial button. Pause function To insert a temporary pause.
Inhaltszusammenfassung zur Seite Nr. 8
DISPLAY MESSAGES Message Waiting (New Zealand Only) MSG If you have arranged a voice mail service with your telephone company, the LCD screen will display MESSAGE WAITING MSG for a few seconds after a call is received. The screen will then display MSG in the upper left corner until you retrieve the For LCD messages to operate, message from the voice mail service. you must first subscribe to the Total & New Calls AM NEW 02 caller ID service through your 9:52 30/12 This displays the total calls
Inhaltszusammenfassung zur Seite Nr. 9
RECEIVING CALL RECORDS A caller ID record consists of the following information: AM CALL# 02 9:52 30/12 Number of call records received Time and Date of the call TOTAL CALLS 04 The LCD display will not Total calls operate if the batteries are flat AM CALL# 02 9:52 30/12 or not installed. 122-7461-2345 Caller's number Caller's name (if available) CALLER ID OPERATION New Call Indicator The red indicator light of your phone will flash when you have New Calls. It will continue to flash until you ha
Inhaltszusammenfassung zur Seite Nr. 10
TROUBLESHOOTING Blank or faint screen Check the line cord. Connect telephone cord. Replace batteries. Caller ID will not work properly Call your telephone company to verify that your caller ID service is active. Phone will not ring You may have too many communication devices connected to a single line. A communication device can be a phone, a modem or fax machine. Disconnect some devices. No dial tone Verify that you are using the correct line cord and that it is plugged in correctly. No data
Inhaltszusammenfassung zur Seite Nr. 11
FP099 FP099 a a www.uniden.com.au www.uniden.co.nz 9
Inhaltszusammenfassung zur Seite Nr. 12
© 2001 Uniden Australia Pty Limited Uniden New Zealand Limited THANK YOU FOR PURCHASING A UNIDEN PHONE
