Inhaltszusammenfassung zur Seite Nr. 1
DSS8905
Accessory Handset
for DSS8900 Series
Inhaltszusammenfassung zur Seite Nr. 2
Welcome Congratulations on your purchase of the Uniden DSS8905 accessory handset and charging cradle. You can place this fully featured cordless handset anywhere your home has AC power. Note: Illustrations in this manual are used for explanation purposes. Some illustrations may differ from the actual unit. Important! The DSS8905 accessory handset will not operate until it is registered to a Uniden main base. This manual describes how to set up your new handset; for more detailed instruction
Inhaltszusammenfassung zur Seite Nr. 3
Compatible Bases This handset is compatible with Uniden's 5.8 GHz Digital Expandable phone system: the DSS8900 series. Please visit our website at; Australian model: www.uniden.com.au , New Zealand model: www.uniden.co.nz for the most up-to-date list of compatible bases. Installing the Accessory Handset Checking the Package Contents Make sure your package contains the following items. If any items are missing or damaged, contact your place of purchase. • Cordless Handset • Belt Clip •
Inhaltszusammenfassung zur Seite Nr. 4
Installing the Battery Use only the Uniden BT -446 rechargeable battery pack supplied with your cordless telephone. Unpack the Line up the red and black handset, battery wires on the battery pack pack and battery connector with the sticker in the handset’s battery cover. (If the battery cover is on compartment. the handset, press in on the notch and slide the cover off.) RED BLACK Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the batt
Inhaltszusammenfassung zur Seite Nr. 5
Charging the Accessory Handset The handset is powered by a rechargeable battery pack that automatically recharges when the handset is placed in the charging cradle. Use only the Uniden AAD-600S(M) AC adapter with the charging cradle. Place the cord through the molded Connect the AC adapter to a wiring channel. standard 240V AC wall outlet. Place the handset in the charging cradle with the display facing forward. Make sure that the charge LED illuminates when the handset is seated. W
Inhaltszusammenfassung zur Seite Nr. 6
Installing the Optional Headset Your phone may be used with an optional headset. To use a headset, insert the headset plug into the headset jack. Headsets may be purchased by visiting the customer support page on the website; www.uniden.com.au for Australia and www.uniden.co.nz for New Zealand. Registering the Handset You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has ever been registered to a base,
Inhaltszusammenfassung zur Seite Nr. 7
Resetting the Handset If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset. 1) Press and hold [ ] and [#] for at least five seconds, until the SYSTEM RESET menu appears. 2) Select the DEREGISTER HS submenu by pressing [menu/ select]. WHICH HANDSET? appears in the display. 3) Use [ ] or [ ] to select the handset ID to be de- registered from the list, and then press [menu
Inhaltszusammenfassung zur Seite Nr. 8
Using the Interface Parts of the Handset new message LED Earpiece Display (LCD) [ ] key (up) [clear/int’com] key (clear/intercom) [menu/select] key [ ] key (phonebook/left) [ ] key (caller ID/right) [ ] key (end call) [ /flash] key (talk/flash) [ ] key (down) Twelve-key dial pad [ / ] key [#] key [redial/pause] key [ ] key (speaker) [ /mute] key (messages/mute) Microphone Charging contacts Headset jack cover Belt clip hole Speakerphone speaker and ringer Battery
Inhaltszusammenfassung zur Seite Nr. 9
Reading the Display Handset ID and banner Number of new Caller ID calls received Call duration The ringer off icon indicates that the ringer is turned off. The privacy icon appears when the Privacy Mode is turned on. The speaker icon appears when the speaker phone is in use. The mute icon appears while the microphone is muted. The battery icon indicates the handset battery status: full, medium, low, and empty. 8
Inhaltszusammenfassung zur Seite Nr. 10
Using the Four-way Function Key Your handset has a four-way function Up key that allows you to move the cursor or pointer on the display and access the most commonly View the View the used features at the phonebook Caller ID touch of a button. By moving this key to Four-way the left, you open the Function Key phonebook. Move the key to the right to access Caller ID Down information. To use this four-way key, place your thumb over the key on the handset and move to the four posit
Inhaltszusammenfassung zur Seite Nr. 11
If two letters in a row use the same number key , enter the first letter, then use [right] on the four-way function key to move the cursor to the next position to enter the second letter. Number of times key is pressed For example, to enter the word "Movies": 1) Press [6] once to enter M. 2) Use [right] on the four-way function key to move the cursor to the right. 3) Press [6] six times to enter o. 4) Press [8] six times to enter v. 5) Press [4] six times to enter i. 6) Press [3] five times
Inhaltszusammenfassung zur Seite Nr. 12
Using Your Accessory Handset Making and Receiving Calls With the earpiece With the speaker phone 1) Pick up the handset from the 1) Pick up the handset cradle. from the cradle. Make a call 2) Dial the number. 2) Dial the number. 3) Press [ /flash]. 3) Press [ ]. 1) Pick up the handset. (If AutoTalk is on, the phone answers when you pick up the handset from the cradle.) 1) Pick up the handset. Answer a call 2) Press [ /flash]. 2) Press [ ]. (If Any Key Answer is on, you can press any key o
Inhaltszusammenfassung zur Seite Nr. 13
Using Caller ID and Call Waiting If you subscribe to Caller ID, you can store up to thirty Caller ID numbers in each handset. Caller ID records are stored from newest to oldest. Once your Caller ID list is full and you receive an incoming call, the oldest record will be automatically deleted to make room for the new record. To open the Caller ID list, press [ ]. The phone will show the number of new Caller ID records (that is, records you have not reviewed yet) and the total number of stor
Inhaltszusammenfassung zur Seite Nr. 14
Using the Phonebook Your handset can store up to seventy names and numbers in your phonebook. When all the phonebook entries are full, you will hear a beep and MEMOR Y FULL appears. Y ou cannot store any additional names and numbers unless you delete some of the existing ones. Press [ ] to enter the phonebook. Once in the phonebook, you have the following options: Scroll through Press [ ] to scroll through the phonebook the entries alphabetically. Jump to entries that Press the number
Inhaltszusammenfassung zur Seite Nr. 15
Redialing a Number T o redial one of the last five numbers dialed on this handset, press [redial/pause]. This opens the redial list. Use [ ] and [ ] to find the number you wan t to dial, and press [ /flash] or [ ] in standby, or press [menu/select] during a call. Muting the Ringer (One Call Only) While the handset is ringing, press [ /mute] or [ ] to mute the ringer for this call. The phone will ring again on the next call. (The handset must be off the cradle to mute the ringer.) Muting the
Inhaltszusammenfassung zur Seite Nr. 16
Using Hold, Conference, Transfer and Intercom Press [clear/int’com]. If you leave a caller on hold for more than five minutes, the call will be Put a call on hold disconnected. To return to the party on hold, press [ /flash] or [ ]. To join a call already in progress, press [ /flash] or Join a call already [ ]. You can hang up normally; the other station in progress remains connected to the call. Press [clear/int’com]; the call is placed on hold. Use [ ] or [ ] to select the station you w
Inhaltszusammenfassung zur Seite Nr. 17
Accessing Your Answering System If your base has an answering system, you can use your handset to get your messages and change your answering system setup. The answering system plays your new messages (that you have not listened to yet) first. If you have no new messages, the system plays your old messages. You have the following options: Press [ /mute]. The system announces the number of Playing new and old messages, then plays the first new message new followed by the day and time it wa
Inhaltszusammenfassung zur Seite Nr. 18
Accessing Voicemail If your base doesn't have an answering system and you subscribe to a voice mail service, you can program your handset to automatically dial the access number. 1) Press [menu/select]. 2) Move the cursor to HANDSET SETUP and press [menu/select]. 3) Move the cursor to EDIT VOICE MAIL and press [menu/select]. 4) Enter your access number (up to twenty digits). If you need the phone to wait before sending the next digits, press [redial/pause] to insert a two-s
Inhaltszusammenfassung zur Seite Nr. 19
Battery Replacement and Handling With normal usage, your battery should last about one year. If the talk time becomes short even after the battery is recharged, please replace the battery. A replacement Uniden adapter or battery may be purchased by visiting our website at; Australian model: www.uniden.com.au , New Zealand model: www.uniden. co.nz Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, use only the BT-446 battery pack. Caution: - This
Inhaltszusammenfassung zur Seite Nr. 20
MEMO 19
