Inhaltszusammenfassung zur Seite Nr. 1
Preparation Basic Operation Advanced Operation Useful Information
2.4GHz Cordless Phone
Model No. KX-TG2563B
KX-TG2563F
KX-TG2563S
KX-TG2563W
Pulse-or-tone dialing capability
Operating Instructions
KX-TG2563B
Caller ID Compatible
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for about 6 hours before initial use.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico
Inhaltszusammenfassung zur Seite Nr. 2
Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 63 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller’s name and phone number. Call Waiting Caller ID, which displays a second caller’s name and phone number while the user is on another call, requires a subscription t
Inhaltszusammenfassung zur Seite Nr. 3
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
Preparation Basic Operation Advanced Operation Useful Information Using the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Storing Names and Numbers in the Directory . . . . . . . . . . . . . . 38 Selecting Characters to Enter Names . . . . . . . . . . . . . . . . . . . . 40 Finding Items in the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Dialing from the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Editing an Item
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
Inhaltszusammenfassung zur Seite Nr. 8
Location of Controls Handset Antenna Display (p. 9) (DIRECT) Button (p. 34, 35) Headset Jack (p. 56) Navigator Key (TALK) Button (p. 20, 25) ( , , , ) (p. 17, 21, 28, 39, 40) (FUNCTION/EXIT/CH) (INTERCOM/CLEAR) (Channel) Button Button (p. 21, 33, 49) (p. 17, 20, 28) (TONE) Button (p. 52) Charge Contact (p. 14) Charge Contact (p. 14) (REDIAL/PAUSE) Button (p. 20, 21, 52) (FLASH/CALL!WAIT/VOICE!MAIL) Button (p. 46, 48, 52, 53) 8 9 3 TALK L LOUD OUD BACK BACK SE SEARC RCH
Inhaltszusammenfassung zur Seite Nr. 9
Preparation Display The handset shows you instructions and information on the display. These display prompts are shown below. The Caller List is empty or there are no stored items in the directory. No items stored The battery needs to be charged. Place the handset on the base unit to charge the battery (p. 14). Recharge battery The display shows the number of new calls and the battery strength while the handset is on the base unit. 12 new calls This display shows the number of new calls when Ö
Inhaltszusammenfassung zur Seite Nr. 10
Display During a conversation, the display shows the length of the call (ex. 1 hour, 6 minutes and 35 Talk seconds). The battery strength is also displayed 01-06-35 (p. 13). The handset has lost communication with the base unit. Place the handset on the base unit No link to base. and try again. Place on cradle and try again. This is a name from the Caller List. The display shows: JACK SMITH — the caller’s name, 1-222-333-4444 11:20A JAN.10 ✕3 — the caller’s number, — the time and date of the la
Inhaltszusammenfassung zur Seite Nr. 11
Preparation A second call is received during a conversation (p. 52). NANCY BROWN 1-000-222-3333 ----Waiting----- Ö, Ñ, BACKÜ or FWD/EDITá was pressed with the handset while the handset was on the Please lift up base unit. Lift the handset and press the button and try again again. While the base unit was not in the standby mode, Ö or Ñ was pressed to search the Caller Not available List/directory list, FWD/EDITá was pressed to select an option or (INTERCOM/CLEAR) was pressed. When trying to stor
Inhaltszusammenfassung zur Seite Nr. 12
Settings Connections Fasten the cords to prevent them Single-Line from being disconnected. Telephone Jack (RJ11C) Hooks Hooks Telephone Line Cord Power Outlet (AC 120 V, 60 Hz) AC Adaptor Raise the antennas. •USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z). •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •To connect a standard telephone on the same line, see page 58. •If your unit is connected to a PBX which does not
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
Settings Recharge Recharge the battery when: Recharge battery —“Recharge battery” is displayed on the handset, —“ ” flashes on the display, or —the handset beeps intermittently while it is in use. •If you DO NOT recharge the handset battery for more than 15 minutes, the display will keep indicating “Recharge battery” and/or “” will continue to flash. Battery information After your Panasonic battery is fully charged (p. 13): Operation Approx. battery life near the base unit* Up to 4.5 hours While
Inhaltszusammenfassung zur Seite Nr. 15
Preparation Selecting the Dialing Mode You can program the dialing mode using the handset near the base unit. If you have touch tone service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”. Your phone comes from the factory set to “Tone”. Make sure the unit is in the standby mode initially. Press (FUNCTION/EXIT/CH). HSave directory 1 Ringer volume GF H=Yes Press Ö or Ñ repeatedly until the arrow HProgram 2 points to “Program”. GF H=Yes Press FWD/EDITá (Yes key). HSave DIRECT#
Inhaltszusammenfassung zur Seite Nr. 16
Settings Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used (p. 52). Your phone comes from the factory set to “A”. Use the handset near the base unit. Make sure the unit is in the standby mode initially. Press (FUNCTION/EXIT/CH). HSave directory 1 Ringer volume GF H=Yes Press Ö or Ñ repeatedly until the arrow HProgram 2 points to “Program”. GF H=Yes Press FWD/EDIT á (Yes key). HSave DIR
Inhaltszusammenfassung zur Seite Nr. 17
Preparation Programmable Functions You can program the following function items using the handset near the base unit. The display shows the programming instructions. See the corresponding pages for function details. Make sure the unit is in the standby mode initially. Press (FUNCTION/EXIT/CH). * HSave directory To store an item in the directory (p. 39). Ringer volume To select the ringer volume (p. 19). Program Press FWD/EDIT á. * HSave DIRECT# To store a phone numb
Inhaltszusammenfassung zur Seite Nr. 18
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
Making Calls With the Handset (TALK) (FUNCTION/EXIT/CH) (INTERCOM/CLEAR) (REDIAL/PAUSE) Press (TALK). Talk 1 Dial a phone number. Talk 2 •The dialed number is displayed. •After a few seconds, the display will show the 1112222 length of the call and the battery strength. Talk 00-00-00 To hang up, press (TALK) or place the Off 3 handset on the base unit. 00-01-08 •If the handset has lost communication with the base unit, 3 beeps sound and “No link to base. Place on cradle and try again.” is displa
