Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions
Digital Cordless Phone
Model No. KX-TG1070E
KX-TG1072E
KX-TG1073E
KX-TG1074E
Digital Cordless Answering System
KX-TG1070
Model No.
KX-TG1090E
KX-TG1092E
Charge the batteries for about
KX-TG1093E
10 hours before initial use.
KX-TG1094E
Table of Contents
Introduction ................................................. 2
Preparation .................................................. 4
Useful Telephone Settings ....................... 10
Making / Answering Calls ................
Inhaltszusammenfassung zur Seite Nr. 2
Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Note: • This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. • In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: Panason
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Included accessories Quantity No. KX-TG1070 KX-TG1072 KX-TG1073 KX-TG1074 Accessory items KX-TG1090 KX-TG1092 KX-TG1093 KX-TG1094 AC adaptor for base unit 1. 1 1 1 1 Part No. PQWATG1070E Telephone line cord Part No. PQJA87S or 2. 1 1 1 1 460015600200 (for UK) Rechargeable batteries AAA (R03) size 2 4 6
Inhaltszusammenfassung zur Seite Nr. 4
Preparation Warning: Important information • To prevent the risk of electrical shock, do not expose this product to rain or General any other type of moisture. • Use only the AC adaptor included with • Unplug this unit from power outlets if it this product, noted on page 3. emits smoke, an abnormal smell or • Do not connect the AC adaptor to any makes unusual noise. These AC outlet other than a standard 220- conditions can cause fire or electric 240 V AC outlet. shock. Confirm that smoke has • T
Inhaltszusammenfassung zur Seite Nr. 5
Preparation Information on Disposal in other Information on Disposal for Users of Countries outside the European Union Waste Electrical & Electronic This symbol is only valid in the European Equipment (private households) Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general
Inhaltszusammenfassung zur Seite Nr. 6
Preparation (without AC adaptor) to the same Connections telephone line using a T-adaptor. Your Panasonic sales shop can offer you more information about connection Base unit possibilities. Hook Location For maximum distance and noise-free operation, place your base unit: • Away from electrical appliances such as TVs, radios, personal computers or other phones. • In a convenient, high and central location. 1. To telephone network 2. 220-240 V, 50 Hz Battery installation Note: Important: • Use on
Inhaltszusammenfassung zur Seite Nr. 7
Preparation not in use (standby). Battery charge • Even after the handset is fully charged, Place the handset on the base unit or the handset can be left on the base charger for about 10 hours before initial use. unit or charger without any ill effect on the batteries. When charging, and are alternately • The battery strength may not be shown on the display. When the batteries are displayed correctly after you replace highly charged, remains on the display. the batteries. In this case, place
Inhaltszusammenfassung zur Seite Nr. 8
Preparation Charger Handset KX-TG1072/KX-TG1073/KX-TG1074 KX-TG1090/KX-TG1092/KX-TG1093/ KX-TG1092/KX-TG1093/KX-TG1094 KX-TG1094 1 1. Charge contacts Displays Icons Meaning Handset within range of base unit 1. Receiver • When this icon is not displayed: 2. Display out of range, no registration or no 3. [ /C] Answering system / Clear / Mute power on base unit 4. [ ] Talk 5. [ ] Speakerphone Setting mode 6. [ / ] Volume down / Redial list 7. Charge contacts Making or answering a cal
Inhaltszusammenfassung zur Seite Nr. 9
Preparation Meaning Icons Symbols used in these operating instructions Displayed when you press [ ] Symbol Meaning Displayed when you press [ ] [ /OK] Press [ /OK] Displayed when you press Proceed to the next > [R] operation Displayed when you long press [0] If the current handset number [ ] is 2, “[2]” is displayed Displayed when you press and hold [INT]. For KX-TG1090/KX-TG1092/KX-TG1093/ KX-TG1094 only Icons Meaning Speakerphone is on Answer system is on Answer system setting mode is selecte
Inhaltszusammenfassung zur Seite Nr. 10
Useful Telephone Settings Guide to telephone settings For your reference, a chart of all items which can be customized for the telephone is printed below. Items Page Default setting Date and time - Page 10 12 and 24-hour display format Page 10 24-hour Handset ringer tone 1 Page 10 Handset ringer volume Page 11 5 Handset key tone Page 11 On Dial mode * Tone Page 11 Auto talk Page 11 Off Recall time * 100ms Page 11 PIN * Page 11 0000 * You do not need to program the same item using another handset
Inhaltszusammenfassung zur Seite Nr. 11
Useful Telephone Settings Note: Handset ringer volume • Consult your service provider/ 1 [ /OK] > [5] telephone company for details of this 2 Press [ ] or [ ] to select handset setting. ringer volume. • 5 levels are available. • The handset plays the selected tone Setting PIN at that volume while selecting. Set the PIN to prevent others from accidentally resetting the telephone 3 [ /OK] to save the setting. settings. • Factory setting is “0000”. Handset key tone (On/Off) Changing to a new PIN 1
Inhaltszusammenfassung zur Seite Nr. 12
Making / Answering Calls Making calls Answering calls 1 Predial the phone number > [ ] 1 Press [ ] to answer the call. • If you make a mistake while 2 When finished talking, press [ ] or predialling a phone number, press [C] place the handset on the base unit or to clear it. Press and hold [C] to clear charger. all inputs. Note: 2 When finished talking, press [ ] or • With Auto Talk function switched on, place the handset on the base unit or you can talk directly when the handset charger. is pic
Inhaltszusammenfassung zur Seite Nr. 13
Making / Answering Calls Redialling Silent mode To switch off ringer, press and hold [ ] The last 4 numbers dialled (each 20 digits max.) are stored in the redial list. until “ ” shows on the display. • When an incoming call is received, 1 [ / ] > Press [ ] or [ ] to select a only “ ” flashes on the display to desired number. indicate an incoming call. 2 Press [ ] to start redialling. To switch on ringer, press and hold [ ] Note: until “ ” disappears from the display. • If the number is more tha
Inhaltszusammenfassung zur Seite Nr. 14
Phonebook Adding entries to the phonebook The phonebook allows you to make calls without having to dial manually. You can add 10 phone numbers to the phonebook. 1 [ /OK] > [ ] 2 Press [ ] or [ ] to select a phonebook location (0-9). 3 Enter the party’s phone number (20 digits max.). 4 [ /OK] to save the phone number in the phonebook. Making calls 1 [ ] > Press [ ] or [ ] to display the desired entry. 2 [ ] Note: •(KX-TG1090/KX-TG1092/KX-TG1093/ KX-TG1094) - Press [ ] to talk through the earpiece
Inhaltszusammenfassung zur Seite Nr. 15
Caller ID Service Note: Using Caller ID service • Press [ ] to start calling the selected Important: number. • This unit is Caller ID compatible. To • If a call number in the log has never use Caller ID features (such as been read, “n ” shows prior to the displaying caller phone numbers), you number. must subscribe to Caller ID service. • If the number is more than 10-digit Consult your service provider/ long, only the last 10 digits will be telephone company for details. displayed preceeded
Inhaltszusammenfassung zur Seite Nr. 16
Answering System Feature (KX-TG1090/KX-TG1092/KX-TG1093/KX-TG1094 ) Prerecorded greeting message will be Answering system used if there is no user’s recorded The unit contains an answering system message. Prerecorded greeting message which can answer and record calls for you cannot be deleted. when you are unavailable to answer the phone. The total recording capacity Selecting language for prerecorded (including your greeting message and greeting message caller messages) is about 8 minutes. 4 la
Inhaltszusammenfassung zur Seite Nr. 17
Answering System Feature (KX-TG1090/KX-TG1092/KX-TG1093/KX-TG1094 ) Deleting the greeting message • If there are no new messages, all messages will be played back after a beep. 1 [ ] • Refer to the following table and press •" " flashes on the display. keys for corresponding operation. 2 [7 ] 3 Press [#x] to delete user’s greeting Direct commands message while listening to the greeting message. Prerecorded Functions Keys greeting message cannot be deleted. After you have erased your own Starts a
Inhaltszusammenfassung zur Seite Nr. 18
Answering System Feature (KX-TG1090/KX-TG1092/KX-TG1093/KX-TG1094 ) Turning call screening on / off • If a wrong access code is entered, a long beep will be heard. (handset number 1 only) 3 Input a new access code (4 digits) 1 [ ] then press [ /OK] key. •" " flashes on the display. 4 Input this new access code once 2 [3 SCREEN] again for confirmation. >[ /OK] 3 Press [ ] or [ ] to select between • If a wrong access code is entered, a “On” and “OFF”. long beep will be heard. 4 [ /OK] to save the
Inhaltszusammenfassung zur Seite Nr. 19
Multi-unit Operation (KX-TG1072/KX-TG1073/KX-TG1074/KX-TG1092/KX-TG1093/KX-TG1094) Intercom between Transferring an outside call handsets to handsets Intercom calls can be made between Example: When handset 1 transfers an handsets. outside call to handset 2 Example: When handset 1 calls handset 2 1 Handset 1: 1 Handset 1: During an outside call, press and hold Press and hold [INT] until “ ” shows [INT] until “ ” shows on the display. on the display. Press [2] (desired Press [2] (desired handse
Inhaltszusammenfassung zur Seite Nr. 20
Useful Information Troubleshooting If you still have difficulities after following the instructions in this section, disconnect the base unit's AC adaptor and remove the handset batteries. Then reconnect the AC adaptor and install the batteries. Cause & Solution Problem • The handset is too far from the base unit. Move disappears. closer. • The AC adaptor is not connected. Check the connections. • You are using the handset or base unit in an area with high electrical interference. Place the
