Inhaltszusammenfassung zur Seite Nr. 1
TCD430AL(E).book Page 1 Tuesday, March 30, 2004 5:27 PM
Digital Cordless Phone
Operating Instructions
Model No. KX-TCD430AL
This unit is Caller ID compatible. To display the caller’s phone
number, you must subscribe to Caller ID service.
Charge the batteries for about 7 hours before initial use.
Please read these Operating Instructions before using the unit and save them for
future reference.
Inhaltszusammenfassung zur Seite Nr. 2
TCD430AL(E).book Page 2 Tuesday, March 30, 2004 5:27 PM Table of Contents Preparation Accessory information . . . . . . . . . . . . . . .3 Important information . . . . . . . . . . . . . . . .4 Location of controls . . . . . . . . . . . . . . . . .7 Connections . . . . . . . . . . . . . . . . . . . . . . .8 Battery installation . . . . . . . . . . . . . . . . . .8 Battery charge . . . . . . . . . . . . . . . . . . . . .8 Battery replacement. . . . . . . . . . . . . . . . .9 Turning the power
Inhaltszusammenfassung zur Seite Nr. 3
TCD430AL(E).book Page 3 Tuesday, March 30, 2004 5:27 PM Preparation Preparation Accessory information Thank you for purchasing a new Panasonic digital cordless phone. Dear Purchaser, You have acquired a product made in compliance with the digital enhanced cordless telecommunications (DECT) standard. DECT technology is characterized by high-security protection against interceptions as well as high-quality digital transmission. This telephone was designed for a wide range of applications. I
Inhaltszusammenfassung zur Seite Nr. 4
TCD430AL(E).book Page 4 Tuesday, March 30, 2004 5:27 PM Preparation Warning: L To prevent the risk of fire or electrical Important information shock, do not expose this product to rain or any other type of moisture. General L The cordless handsets are magnetised L Use only the power supply included with and may retain small metallic objects. this product, noted on page 3. L Do not connect the AC adaptor to any AC Location outlet other than a standard 220–240 V For maximum distance and no
Inhaltszusammenfassung zur Seite Nr. 5
TCD430AL(E).book Page 5 Tuesday, March 30, 2004 5:27 PM Preparation Instructions to customer Installation Attached to this telephone is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service. Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5). You are authorised to install this Permitted Attachment yourself by pluggin
Inhaltszusammenfassung zur Seite Nr. 6
TCD430AL(E).book Page 6 Tuesday, March 30, 2004 5:27 PM Preparation If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed. You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socket will need to be installed. Should the Permitted Attachmen
Inhaltszusammenfassung zur Seite Nr. 7
9 3 1 2 4 5 6 7 8 0 R INT C LINE TCD430AL(E).book Page 7 Tuesday, March 30, 2004 5:27 PM Preparation Display descriptions Location of controls Icons Meaning w Within range of base unit Handset Out of range, no registration 0w4 or no power on base unit A Paging, intercom mode or B x accessing base unit C k Making or answering a call D J E K C Phonebook mode L F l Setting mode 7 Battery strength is low G M 5 Battery strength is high H H Call bar is on (page 20) I A Receiver Direct call is on
Inhaltszusammenfassung zur Seite Nr. 8
LINE TCD430AL(E).book Page 8 Tuesday, March 30, 2004 5:27 PM Preparation 2 Close the battery cover. Connections Hooks Note: (220–240 V, L Use only rechargeable batteries (page 3). 50 Hz) Battery charge Note: Place the handset on the base unit for L If the handset is not charged, you cannot about 7 hours before initial use. make or answer calls. L Never install telephone wiring during a lightning storm. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to
Inhaltszusammenfassung zur Seite Nr. 9
TCD430AL(E).book Page 9 Tuesday, March 30, 2004 5:27 PM Preparation 054 flashes. noted on page 3. L Use only rechargeable batteries. If you Battery icons Battery strength install non-rechargeable batteries and 5 High start charging, the batteries may leak electrolyte. 6 Medium L Do not mix old and new batteries. 7 Low L Use only 2 nickel metal hydride (Ni-MH) 074 Needs to be charged batteries or 2 nickel cadmium (Ni-Cd) Note: batteries. Do not mix battery types. L If the handset is turne
Inhaltszusammenfassung zur Seite Nr. 10
8 cm TCD430AL(E).book Page 10 Tuesday, March 30, 2004 5:27 PM Preparation Wall mounting Setting the time and date 8 cm Important: L Confirm that the AC adaptor is connected. L Ensure that w is not flashing. 1 Press {j}. Screws Hooks Hook 2 Press {v} repeatedly to display “SETTING BS”, then press {>}. 3 Press {*}. 4 Enter the current hour and minute by selecting 2 digits for each (24-hour time entry). Note: Example: 15:15 L Make sure the screws are securely Press {1}{5} {1}{5}. fastened to
Inhaltszusammenfassung zur Seite Nr. 11
TCD430AL(E).book Page 11 Tuesday, March 30, 2004 5:27 PM Telephone Telephone the right of where you want to edit the number. Making calls 5 Edit the number. 1 Lift the handset and dial the phone L To erase a digit, press {C}. number. 6 Press {C}. L To correct a digit, press {C}, then enter the correct number. To erase numbers in the redial list 2 Press {C}. 1 Press {R}. 3 When finished talking, press {ih} or 2 Press {v} repeatedly to select the place the handset on the base unit. number
Inhaltszusammenfassung zur Seite Nr. 12
TCD430AL(E).book Page 12 Tuesday, March 30, 2004 5:27 PM Telephone displayed. page 23. Answering calls To turn off key lock, press {j} for about 2 seconds. 1 Lift the handset and press {C} when the Note: unit rings. L Emergency calls cannot be made until key L You can also answer a call by pressing lock is turned off. any dial key from {0} to {9}, {*}, {#}, L Key lock is turned off when the handset is or {INT}. (Any key talk feature) turned off. 2 When finished talking, press {ih} or p
Inhaltszusammenfassung zur Seite Nr. 13
TCD430AL(E).book Page 13 Tuesday, March 30, 2004 5:27 PM Telephone L If there is no space to store new entries, “MEMORY FULL” will be displayed. Erase Phonebook unnecessary entries. Storing phone numbers and To edit/correct a mistake names 1 Press {<} or {>} to move the cursor to the right of where you want to correct the Up to 20 phone numbers can be stored in number/character. the phonebook for quick access. 2 Press {C} to erase a digit, then enter the 1 Press {j} 2 times. correct num
Inhaltszusammenfassung zur Seite Nr. 14
TCD430AL(E).book Page 14 Tuesday, March 30, 2004 5:27 PM Telephone 2 Press {>}. Making calls using the 3 Press {v} repeatedly to display “YES”, phonebook then press {>}. Before using this feature, store the desired 4 Press {ih}. phone numbers and names into the Note: phonebook (page 13). L The number erased from a hot key will not 1 Press {k}. be deleted from the phonebook. To erase from the phonebook, see page 13. 2 Press {e} or {v} repeatedly to display the desired entry. Making calls
Inhaltszusammenfassung zur Seite Nr. 15
TCD430AL(E).book Page 15 Tuesday, March 30, 2004 5:27 PM Telephone information while talking. After you hear a call-waiting tone, the caller’s phone number Caller ID service will be displayed. You can answer the second call, keeping Important: the first call on hold. Follow Telstra or your L This unit is Caller ID compatible. To service provider instructions using {R}. display the caller’s phone number, you L If the phone number is stored in the must subscribe to Caller ID service. Aft
Inhaltszusammenfassung zur Seite Nr. 16
TCD430AL(E).book Page 16 Tuesday, March 30, 2004 5:27 PM Telephone Example: 4 Press {ih}. *1 Storing caller information into the phonebook 1 Press {e} or {v} repeatedly to display the desired entry, then press {>}. 2 Press {v} repeatedly to display “SAVE *1 Shown when this call has already been TEL NO”, then press {>}. viewed or answered. 3 Press {j}. 3 Press {C} to call back the displayed 4 Enter the party’s name (9 characters party. max.; see the character table on page Note: 13). L
Inhaltszusammenfassung zur Seite Nr. 17
TCD430AL(E).book Page 17 Tuesday, March 30, 2004 5:27 PM Useful Telephone Settings Useful Telephone Settings Guide to handset settings For your reference, a chart of all items which can be customised for the handset is printed below. Details of each item can be found on the corresponding pages. To enter the 2nd menu, first press {>}. Press {v} repeatedly to display “SETTING HS”, then press {>}. 2nd menu 3rd menu Default setting Page “TIME ALARM”“SET TIME” page 18 “SET ALARM”“OFF” page 18 “
Inhaltszusammenfassung zur Seite Nr. 18
TCD430AL(E).book Page 18 Tuesday, March 30, 2004 5:27 PM Useful Telephone Settings ALARM”, then press {>}. Handset settings 4 Press {v} repeatedly to display “SET ALARM”, then press {>}. 5 Press {v} repeatedly to select the Time alarm desired setting, then press {>}. An alarm will sound for 3 minutes at the set 6 Press {ih}. time once or daily. “ONCE”: The alarm will ring only once. Ringer options “REPEAT DAILY”: The alarm will ring at the set time everyday. Ringer volume “OFF”: Turns thi
Inhaltszusammenfassung zur Seite Nr. 19
TCD430AL(E).book Page 19 Tuesday, March 30, 2004 5:27 PM Useful Telephone Settings 4 Press {v} repeatedly to display the Display options desired item, then press {>}. 5 Press {v} repeatedly to select the Selecting the standby mode display desired setting from “RING TYPE 1” to “RING TYPE 20”, then press {>}. “CLOCK”: The time and date will be displayed. Set the time and date beforehand 6 Press {ih}. (page 10). Note: “OFF”: Turns this feature off. L If you select one of the melody ringer
Inhaltszusammenfassung zur Seite Nr. 20
TCD430AL(E).book Page 20 Tuesday, March 30, 2004 5:27 PM Useful Telephone Settings 2 Press {v} repeatedly to display BAR”, then press {>}. “SETTING HS”, then press {>}. 5 Enter “0000” (default handset PIN). 3 Press {v} repeatedly to display L If you changed PIN, enter it (page 21). “DISPLAY OPT”, then press {>}. 6 Press {v} repeatedly to select “ON” or 4 Press {v} repeatedly to display “TALK “OFF”, then press {>}. MODE”, then press {>}. 7 Press {ih}. 5 Press {v} repeatedly to select the N
