Inhaltszusammenfassung zur Seite Nr. 1
Preparation Basic Operation Advanced Operation Useful Information
PQQX13367ZA-BM01 02.1.9 9:00 AM y[W 1
Integrated Telephone System
Model No. KX-T2375ALW
Operating Instructions
PLEASE READ BEFORE USE AND SAVE.
Inhaltszusammenfassung zur Seite Nr. 2
PQQX13367ZA-BM01 02.1.9 9:00 AM y[W 2 Before Initial Use Thank you for purchasing your new Panasonic integrated telephone. For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Attach or keep original receipt to assist with any repair under warranty. Accessories (included) · Handset . . . . . . . . . . . . . . . one · Handset Cord. . . . . . . . . . . one (p. 7) (p. 7) · Telephone Line Cord . . . . . one · Wall Mounting Adaptor . . .
Inhaltszusammenfassung zur Seite Nr. 3
Preparation Basic Operation Advanced Operation Useful Information PQQX13367ZA-BM01 02.1.9 9:00 AM y[W 3 Contents Preparation Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Installing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
E N O H VOLUME MUTE HEADSET MIC HOLD GHI JKL MNO PQRS TUV WXYZ RECALL ABC DEF DIAL LOCK REDIAL PROGRAM EMERGENCY P ITS PAUSE PAUSE AUTO/ LOWER LOWER MUTE TIME SET PROG. DIAL LOCK - P S PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 4 Location of Controls (DIAL\LOCK) Button (p. 25) (PROGRAM) Button (p. 9, 16) Display (p. 5) Headset Jack RINGER (p. 27) Selector (p. 11) One-Touch Auto Dial Buttons (p. 18) (AUTO/LOWER) Button (p. 16, 19) Ringer Indicator (p. 15) VOLUME (_) (^) Buttons (p. 14) (PAUSE) But
Inhaltszusammenfassung zur Seite Nr. 5
Preparation PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 5 Display (This display shows all of the possible configurations.) : In the standby mode, the display shows the current time. (Ex. 12:00AM) : During a conversation, the call duration is displayed. (Ex. 2 hours, 14 minutes, 30 seconds) : (RECALL) was pressed. : (PAUSE) was pressed while storing phone numbers. : ($) was pressed while dialling. : (#) was pressed while dialling. : (AUTO/LOWER) was pressed (p. 16, 19). : (MUTE) was pressed during a co
Inhaltszusammenfassung zur Seite Nr. 6
PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 6 Settings Installing the Batteries Press down in the direction of the - + + - 1 arrow and remove the cover. - +
Install the batteries in the proper 2 2 order as shown, matching the correct polarity. Close the battery cover. 3 1 ³Batteries are not included in the unit. ³Install three high quality “LR6” Alkaline or “R6” Manganese batteries. We recommend to use Alkaline batteries. Battery life is: —about six months in use of Alkaline batteries. —about three
Inhaltszusammenfassung zur Seite Nr. 7
Preparation PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 7 Ò Connecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial tone. Handset Handset Cord L LIIN NE E D DA AT TA A To Socket Telephone Telephone Plug Line Cord ³Use only a Panasonic Handset for the KX-T2375ALW. ³KX-T2375ALW is not designed to be used with rotary (pulse dialling) service. 7
Inhaltszusammenfassung zur Seite Nr. 8
PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 8 Ò Settings Connecting a Communication Device If you connect a communication device (computer, modem, fax, answering machine, etc.) to the telephone line, you can connect it through this unit using the DATA jack. After connecting the handset and telephone line cord (p. 7), connect the communication device telephone line cord to the DATA jack. To Telephone Plug and Socket L LIIN NE E D DA AT TA A ³Computer ³Modem ³Fax ³Answering machine ³Make sure the commu
Inhaltszusammenfassung zur Seite Nr. 9
Preparation PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 9 Ò Programming Summary of Preparations You can program the following functions. The display shows the programming instructions. See the corresponding pages for function details. Make sure that a call is not put on hold. Press (PROGRAM). Press (MUTE). ³To set the call restriction, press (1). (page 26) ³To change the recall time, press (2). (page 23) ³To turn on/off music played during the hold, press (4). (page 22) ³To change the PIN code for the
Inhaltszusammenfassung zur Seite Nr. 10
PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 10 Ò Settings Time Adjustment You can select AM/PM or 24-hour clock by programming. Make sure that a call is not put on hold. Press (PROGRAM). 1 Press (MUTE). 2 Press (6). 3 Enter the current time (hour and 4 minute) using a 4-digit number. (Ex. To set 9:30, enter “0930”.) Press (#) to select AM, PM or 24-hour 5 clock. (Ex. You select PM.) Display Option AM A P PM (Blank display) 24-hour clock ³Each time you press (#), the selection will change on the displa
Inhaltszusammenfassung zur Seite Nr. 11
Preparation PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 11 Ò Setting the LCD Contrast You can select the LCD contrast level from 1 to 4 by programming. Your phone comes from the factory set to 3. Make sure that a call is not put on hold. Press (PROGRAM). 1 Press (MUTE). 2 Press (7). 3 ³The current setting is displayed. Press (1) to (4). 4 ³Each time you press a button, the level will change on the display. Press (PROGRAM). 5 ³A long beep sounds. ³The unit will return to the standby mode. Selecting the
Inhaltszusammenfassung zur Seite Nr. 12
PQQX13367ZA-BM02 02.1.9 9:01 AM y[W 12 Ò Settings Wall Mounting This unit can be mounted on a wall. Pull down the handset hook until it 1 locks, so the tab holds the handset. Tuck the telephone line cord inside 2 the wall mounting adaptor, and push it in the direction of the arrow. ³“UP” should be facing upward. Install screws using the wall template below. Connect the 3 telephone line cord. Mount the unit, and slide down. Screws To temporarily set the 8.3 cm handset down during a conversation
Inhaltszusammenfassung zur Seite Nr. 13
Basic Operation PQQX13367ZA-BM03 02.1.9 8:59 AM y[W 13 Making Calls Ò You can make a call by simply lifting the handset. To hang up, place the handset on the cradle. (REDIAL) VOLUME (_), (^) (HOLD) MIC (Microphone) (SP-PHONE/HEADSET) and Indicator Using the speakerphone Press (SP-PHONE/HEADSET). 1 ³The indicator lights. Dial a phone number. 2 ³The dialled number is displayed. ³After a few seconds, the display will show the length of the call. ³If you misdial, press (SP-PHONE/HEADSET) and star
Inhaltszusammenfassung zur Seite Nr. 14
PQQX13367ZA-BM03 02.1.9 8:59 AM y[W 14 Ò Making Calls To adjust the handset volume (4 levels) or the speaker volume (8 levels) while talking To increase, press VOLUME (^). To decrease, press VOLUME (_). Ex. Handset volume level: 2 Ex. Speaker volume level: 3 ³One level of the handset volume is ³One level of the speaker volume is shown by “ ”. shown by “ ”. ³The display shows the volume level ³The display shows the volume level for a few seconds. for a few seconds. To put a call on hold Press (
Inhaltszusammenfassung zur Seite Nr. 15
Basic Operation PQQX13367ZA-BM03 02.1.9 8:59 AM y[W 15 Answering Calls While a call is being received, the unit rings and the ringer indicator flashes. You can answer it by simply lifting the handset. Ringer Indicator MIC (SP-PHONE/HEADSET) and Indicator Using the speakerphone Press (SP-PHONE/HEADSET). 1 ³The indicator lights. Talk into the MIC (microphone). 2 To hang up, press (SP-PHONE/HEADSET). 3 ³The indicator light goes out. ³When the ringer volume is set to OFF (p. 11), the unit will not
Inhaltszusammenfassung zur Seite Nr. 16
PQQX13367ZA-BM03 02.1.9 8:59 AM y[W 16 Speed Dialler Storing Phone Numbers in Memory You can store up to 10 phone numbers Speed Dialler in memory. The dialling buttons ((0) to (9)) function as memory stations. Do not press any memory stations before storing to prevent error. Make sure that a call is not put on hold. Memory Station Numbers
(PROGRAM) (AUTO/LOWER) (PAUSE) (SP-PHONE/HEADSET) and Indicator Press (PROGRAM). 1 Enter a phone number, up to 22 digits. 2 ³If you enter a wrong number,
Inhaltszusammenfassung zur Seite Nr. 17
Advanced Operation PQQX13367ZA-BM03 02.1.9 8:59 AM y[W 17 To erase a stored number Press (PROGRAM). 1 Press (AUTO/LOWER). 2 Press a memory station number ((0) to 3 (9)) for the phone number to be erased. ³A long beep sounds. ³The unit will return to the standby mode. Dialling a Stored Number Lift the handset or press 1 (SP-PHONE/HEADSET). Press (AUTO/LOWER). 2 Press the memory station number 3 ((0) to (9)). ³The stored number is displayed and dialled. 17
Inhaltszusammenfassung zur Seite Nr. 18
PQQX13367ZA-BM03 02.1.9 8:59 AM y[W 18 One-Touch Dialler Storing Phone Numbers in Memory You can store up to 20 phone numbers in the one-touch auto dial buttons (10 numbers in UPPER memory locations, 10 numbers in LOWER memory locations). Do not press any one-touch auto dial buttons before storing to prevent misoperation. Make sure that a call is not put on hold. One-touch auto dial buttons (EMERGENCY) (PROGRAM) (AUTO/LOWER) (PAUSE) (SP-PHONE/HEADSET) and Indicator To store in an UPPER memory
Inhaltszusammenfassung zur Seite Nr. 19
Advanced Operation PQQX13367ZA-BM03 02.1.9 8:59 AM y[W 19 Ò To store in a LOWER memory location Press (PROGRAM). 1 Enter a phone number, up to 22 digits. 2 ³If you enter a wrong number, press (PROGRAM) and start again from step 1. Press (AUTO/LOWER). 3 Press one of the one-touch auto dial 4 buttons. ³A long beep sounds. ³The unit will return to the standby mode. ³If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift the handset and place it on the cradle to return to the s
Inhaltszusammenfassung zur Seite Nr. 20
PQQX13367ZA-BM03 02.1.9 9:00 AM y[W 20 Ò One-Touch Dialler Dialling a Stored Number From an UPPER memory location: Lift the handset or press (SP-PHONE/HEADSET). 1 Press the required one-touch auto dial button. 2 ³The stored number is displayed and dialled. OR From a LOWER memory location: Lift the handset or press (SP-PHONE/HEADSET). 1 Press (AUTO/LOWER). 2 Press the required one-touch auto dial button. 3 ³The stored number is displayed and dialled. Memory card Remove the memory card and use i
