Inhaltszusammenfassung zur Seite Nr. 1
CALLING LINE IDENTITY
TELEPHONE
MODEL 9859 IDea
OPERATING INSTRUCTIONS
1
Inhaltszusammenfassung zur Seite Nr. 2
2
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1. FEATURES ................................................................................... 5 2. IMPORTANT NOTES ..................................................................... 6 CONDITIONS OF USE ......................................................................................................................................... 6 EMERGENCY CALLS ................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
RINGER INDICATOR ......................................................................................................................................... 15 RINGER VOLUME CONTROL ........................................................................................................................... 15 RINGER PITCH CONTROL ............................................................................................................................... 15 VOLUME SLIDER ...........................
Inhaltszusammenfassung zur Seite Nr. 5
To select mode 2 ....................................................................................................25 DIALLING A NUMBER FROM THE MEMORIES .............................................................................................. 26 REDIAL MEMORY .............................................................................................................................................. 26 8. HANDSFREE AND HEADSET OPERATION................................. 27 HANDSFREE OPERA
Inhaltszusammenfassung zur Seite Nr. 6
6
Inhaltszusammenfassung zur Seite Nr. 7
1. FEATURES * Alpha-numeric keypad * Large LCD * Clock / timer * 30 number incoming call memory * Time Date and number of new calls * 40 personal Directory memories * Displays number and name of caller (if available) * 10 one-touch / 10 two-touch repertory dialling memories * 5 number redial memory * EEPROM memory feature * HANDSFREE operation * Built in HEADSET support * Speaker volume control * HEADSET mic sensitivity adjustment * PBX Recall key * TBR / Earth recall switch * Ringer indicator
Inhaltszusammenfassung zur Seite Nr. 8
2. IMPORTANT NOTES This Interquartz telephone has been manufactured to very high standards and is very easy to use. Please read this manual carefully to find out how to use the features. CONDITIONS OF USE This Interquartz telephone is approved for use on private branch exchange extensions business or private direct exchange lines. EMERGENCY CALLS "000" calls can be made on this telephone for the purpose of making calls to the emergency service. An access code may also be required before dialling
Inhaltszusammenfassung zur Seite Nr. 9
FIGURE 1 IDEA PROFILES TOP VIEW OF IDea REAR VIEW OF IDea BOTTOM VIEW OF IDea IDE VIEW OF IDea 9
Inhaltszusammenfassung zur Seite Nr. 10
3. SETTING UP UNPACKING The carton contains the following * Telephone body and handpiece * Coiled cord * RJ11 - RJ45 line cord, * Operating manual, * Power pack INSTALLATION 1. Fit the coiled cord to the appropriate sockets in the HANDSET and tel- ephone base. 2. Connect the power pack to a wall socket and to the socket at the rear of the telephone marked DC 9v. 3. Install 4 x AA alkaline batteries(not provided) for complete power backup. (batteries are not required for the telephone to operate)
Inhaltszusammenfassung zur Seite Nr. 11
To set the time * Press the STORE key * Press the TIMER key - Follow the screen prompts and enter the time using the Alpa-Numeric keypad - hour time (HH) as two digits - minute time (mm) as two digits * Then enter 0, for am * 1 for pm * 2 for 24 hour mode * Complete the process by pressing the store key LINE CONNECTION This telephone is supplied with a RJ11-RJ45 line cord for connection to your network. Other types of plugs and cords are available on request. FIGURE 2 IDEA TECHNICAL ADJUSTMENTS
Inhaltszusammenfassung zur Seite Nr. 12
12
Inhaltszusammenfassung zur Seite Nr. 13
4. TECHNICAL ADJUSTMENT - FOR CORRECT OPERATION Caution : please exercise care when adjusting all selectors described, as they and their surrounding electronic components may be damaged by rough treatment. It is also recommended that all adjustments be made with the telephone disconnected from the line. PBX RECALL BUTTON SETTING To achieve compatibility with all networks, the PBX recall button may be selected to execute either Earth Recall or Timed Break (hook flash) by switches under the tele
Inhaltszusammenfassung zur Seite Nr. 14
sensitivity. The control is located on the underside of the telephone (see fig 1). The adjustment can be made with a small screwdriver or similar implement that will fit into the control slot. To make this adjustment 1. Connect the HEADSET to the socket at the rear of the telephone (see fig 1) 2. Set the HF/HS switch to HS (Headset) 3. With the HEADSET plugged in, put it on and lift the HANDSET to the other ear and make an out-going call. 4. Using the HANDSFREE / HEADSET key, switch between HAND
Inhaltszusammenfassung zur Seite Nr. 15
FIGURE 3. GENERAL CONTROL AND INDICATES 5. GENERAL CONTROLS AND INDICATORS HANDSFREE / HEADSET KEY AND INDICATOR When the HANDSFREE / HEADSET key is pressed the red indicator will illuminate to show that the HANDSFREE mode or headset mode is activated. Press the key again to release the HANDSFREE or HEADSET mode. * Note: The HANDSFREE / HEADSET switch setting will determine the mode the HANDSFREE/HEADSET key will activate (see installation section) MUTE KEY AND INDICATOR When pressed it cuts off
Inhaltszusammenfassung zur Seite Nr. 16
when the mute condition is active. Press mute again to release the mute condi- tion. PAUSE KEY Used for both manual and memory dialling. Pressing the pause key will cause the telephone to delay all following dialling functions for 2.5 seconds after which further dialling may commence*. PBX RECALL KEY For use with PABX systems to invoke special functions such as call hold and call transfer Caller Display functions will not operate if the telephone is con- nected behind a PABX system (see caller
Inhaltszusammenfassung zur Seite Nr. 17
CURSOR KEYS TIMER KEY The timer key is used to select either the timer display or clock display. MEMORY KEYS 10 memory keys allow access to 20 memory locations, 10 one-touch and 10 two-touch. ALPHA-NUMERIC KEY PAD A standard 4 x 3 configuration for manual dialling and for numeric and character entries during memory programming. RINGER INDICATOR Flashes when the telephone receives an incoming call. RINGER VOLUME CONTROL Located on the under side of the telephone (see fig 1) three settings are ava
Inhaltszusammenfassung zur Seite Nr. 18
prompts indicate the state the phone is in. (see fig 4) HANG-UP FUNCTION If the Cradle Switch is tapped or the On Hook Dial or Handsfree modes termi- nated, the line will be released automatically. After approximately 2 second, the dial tone will be heard and dialling may be commenced after a brief pause. This function prevents the false transmission of a Hook Flash or Timed Break signal from the Cradle Switch. Caution : Tapping the Cradle Switch (as recommended in some PABX extension user guide
Inhaltszusammenfassung zur Seite Nr. 19
display will return to the continuing timer mode. While the telephone is not in use, pressing the timer key changes the mode display in the following sequence: * previous elapsed time * reset and start timer * stop timer * time of day The timer key is also used to set the clock (see installation section) PREVIEW DIALLING The preview dialling option allows you to enter a phone number into the keypad without first Lifting the handset or engaging the HANDSFREE function. 1. Enter desired phone numbe
Inhaltszusammenfassung zur Seite Nr. 20
To change this setting: * Press and hold the calls key until the display shows. SET LIST TYPE < UNANSWERED ALL > * The current setting sill flash. Using the cursor keys and select the desired mode. * Press the store key to set the mode. VIEWING THE CALLS LIST When the telephone receives a new call, the red indicator above the calls key will flash and the new calls display on the LCD will indicate the number of new calls that have not been viewed. To view the calls list * Press the calls ke
