Inhaltszusammenfassung zur Seite Nr. 1
RBI-100
CALLER ID
User’s Guide
Mode d’emploi • Manual del usuario
40
Inhaltszusammenfassung zur Seite Nr. 2
Introduction ® Congratulations! You now own a Rolodex Elec- tronics Caller ID. Your Caller ID can: • store up to 90 call records, including information such as caller’s name, and/or phone number, and the time the call was placed, if available, • alert you when new calls have been received, • display the current time and date, • display the total number of calls received, • display prompts and screen displays in one of three languages: English, French, or Spanish, • alert you when you have messag
Inhaltszusammenfassung zur Seite Nr. 3
Introduction ® New New Call Message Indicator Indicator Light Light NEW MSG REVIEW DEL SET Down Delete Up Set Battery Compartment Door Wall Mount Wall Mount Phone Jack and Line Jack (Interchangeable) 2
Inhaltszusammenfassung zur Seite Nr. 4
Getting Started To Install the Battery (Not Included) Note: The Caller ID will not function without a battery. 1. Disconnect the telephone line. 2. Lift the battery compartment door on the back of the Caller ID. 3. Install a 9-volt battery. 4. Replace the battery compartment door. To Connect the Telephone Line 1. Connect one end of the telephone cord into one of the jacks on the back of the Caller ID (either jack can be used) and connect its other end into the wall jack. 2. Connect one end of th
Inhaltszusammenfassung zur Seite Nr. 5
Changing the Settings Caution: When you press SET to change a setting, that setting will flash on the screen for about 5 seconds. If you do not adjust the setting and then press SET dur- ing this time, the settings will remain unchanged. To Set the Time and Date 1. Press SET until ENTER TIME appears and the hour is flashing. 2. Use or to adjust the hour. You can also adjust AM and PM on the 12-hour clock while adjusting the hour. Note: When the language is set to English, the clock is a 12-hou
Inhaltszusammenfassung zur Seite Nr. 6
Changing the Settings To Set the Language and Area Code 1. To set the language of the screen prompts, press SET until IN ENGLISH? appears. 2. Use or to set a language. 3. To set your area code, press SET until ENTER AREA CODE appears and the first digit of the area code flashes. 4. Use or to change the first digit. 5. To change the other digits, press SET until the desired digit flashes and then use or . Note: If your area code has three digits, press SET again when the fourth digit flashes
Inhaltszusammenfassung zur Seite Nr. 7
Receiving Calls When the telephone connected to the Caller ID rings, new call information appears between the first and second ring. If you answer before the second ring, the Caller ID will not display any information. When a call is received, the Caller ID displays a call record, which can include, if available, the name of the caller, the caller’s telephone number, and the time that the call was placed. The amount of information displayed depends on the signal sent by your phone company. P M N
Inhaltszusammenfassung zur Seite Nr. 8
Reviewing Calls This Caller ID automatically stores the call informa- tion from the last 90 calls. If you have not received any new calls, the Caller ID will display the date, time, and number of total calls, if any. If you have re- ceived new calls, the screen will display the appro- priate number (ex: 03 NEW CALLS). P M NEW 4:27 ONE NEW CALL 1. To review your new calls, press repeatedly. 2. To review your old calls, press repeatedly. When you reach the end or top of the list, press the oppos
Inhaltszusammenfassung zur Seite Nr. 9
Reviewing Calls About Message Waiting Your Caller ID can alert you to check your phones messages if you have a voice mail service from your phone company that offers Caller ID signalling. For more information about these services, contact your phone com- pany. When you have a new message, the phone company will send a signal to your Caller ID that causes the MSG light to blink and a marker to appear on the display the next time you receive a call. After your messages are reviewed, the phone co
Inhaltszusammenfassung zur Seite Nr. 10
Deleting Calls To Delete Individual Calls When you are reviewing a call record, you can delete it from your Caller ID’s memory. 1. Use or to find the call record you want to delete. 2. Hold DEL for about 1 second. The call record will be deleted and the next call record will be displayed. To Delete All Your Calls 1. Use or until you see TOP OF LIST or END OF LIST. 2. Hold DEL until DELETE ALL? appears. Warning! If you continue with these steps all your call records will be deleted. 5:07 DELE
Inhaltszusammenfassung zur Seite Nr. 11
Troubleshooting When the Battery Is Low When the battery is low on power, the low battery marker ( ) appears on the display. You should change the battery as soon as possible to ensure normal operation. Warning! Your call records may be erased if the Caller ID is without a battery for more than 20 seconds, so be sure to have a fresh battery on hand before you remove the old battery. To learn how to install a battery, read “Get- ting Started.” About Error Messages If ERROR appears while recei
Inhaltszusammenfassung zur Seite Nr. 12
Troubleshooting • To reduce the risk of electric shock, do not disassemble this product. Take it to a quali- fied serviceman when service or repair work is required. Opening or removing cov- ers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. • Unplug this product from the telephone lines and refer to qualified service person- nel under the following conditions: A. If the product has been exposed to liqui
Inhaltszusammenfassung zur Seite Nr. 13
Limited Warranty (U.S. only) Franklin Electronic Publishers, Inc. (“Franklin”) warrants to the end user that this product will be free from defects in material and workmanship for a period of ONE YEAR from the date of origi- nal retail purchase, as evidenced by sales receipt. On discovery of a defect, the end user must return this product (transportation charges prepaid) either to the dealer from whom it was pur- chased or directly to Franklin at the address given below. Each product returned mu
Inhaltszusammenfassung zur Seite Nr. 14
Product Information Specifications Model: RBI-100 • Dimensions: 111 x 67 x 70 mm • Weight: 4.7 oz. • REN 0.0B Cleaning, Storage, Problems To clean this Caller ID, spray a mild glass cleaner onto a cloth and wipe its surface. Don’t spray liquids directly on the Caller ID. Don’t use or store this Caller ID in ex- treme or prolonged heat, cold, humidity, or other ad- verse conditions. If you have a problem with your Caller ID, refer to the limited warranty. For sales and customer service, please ca
