Inhaltszusammenfassung zur Seite Nr. 1
Operating Manual
®
ClearSounds A300
DECT 6.0 Cordless Phone
with Sound Boost
1 – ENGLISH
FRANÇAIS ESPAÑOL ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS PRIOR TO USE Pg. 4 Congratulations Pg. 5-6 Important Safety Instructions Pg. 7-8 Location of Controls Pg. 9-10 Keys Descriptions Pg. 10-11 LCD Icons Descriptions Pg. 12-14 Installation Steps MENU NAVIGATION Pg. 16-17 Menu Map BASIC PHONE FUNCTIONS Pg. 17-18 Handset Registration Pg. 18 Amplification Pg. 18-19 Speakerphone Pg. 19-20 Ringer Setting Pg. 20 Handset Power On/Off Pg. 20 Hearing Aid and Cochlear Implant Users Pg. 21 Answer a Call Pg. 22 Make a Call PHONE BASE SETTINGS
Inhaltszusammenfassung zur Seite Nr. 3
Pg. 30-31 One-Touch Memory Pg. 31-32 Mute, Redial Pg. 33 Languages DISPLAY SETTINGS Pg. 34 Set Contrast Pg. 34-35 Set Date & Time Pg. 35 LCD Description Pg. 35-36 Reviewing Voice Mail Messages CALLER ID (CID) Pg. 36 General Information Pg. 36-37 Receiving & Storing Caller ID Records Pg. 37 Caller ID on Call Waiting Pg. 38 Review Caller ID Pg. 38 Dial from Caller ID Pg. 39 Delete Caller ID Pg. 39-40 Store Caller ID PHONE ANSWERING MACHINE (TAM) Pg. 40 General Information Pg. 40 Turn On/Off
Inhaltszusammenfassung zur Seite Nr. 4
ADDITIONAL HANDSET FUNCTIONS Pg. 53-54 Intercom/Conference Call Pg. 55 Paging Pg. 55 Key Lock Pg. 55-56 Alarm Pg. 50 Torch TROUBLESHOOTING GUIDE TECHNICAL SPECIFICATIONS REGULATORY COMPLIANCE Important FCC Information for Customers INDUSTRY CANADA WARRANTY POLICY PRIOR TO USE Congratulations on your purchase of the A300 phone from ® ClearSounds Communications . Please read this User Manual carefully in order to get the best use out of your new phone. This phone is designed for individuals wi
Inhaltszusammenfassung zur Seite Nr. 5
█ IMPORTANT SAFETY INSTRUCTIONS Read and understand the Installation Guide and User Manual. When using your phone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to person, including the following: WARNING: The A300 phone is capable of amplifying sounds to a loud volume. It is important to instruct all potential users of its proper operation. It is advised to adjust the volume control to the minimum level (Low) when not in
Inhaltszusammenfassung zur Seite Nr. 6
WARNING: Occasionally a power surge can occur on electrical lines without warning. With any electrical device that you plug into an outlet, it is suggested you use a surge protector. A surge protector will prevent power surges from damaging your phone. Surge protectors are simple devices available at your local hardware store. WARNING: Do not overload wall outlets or extension cords as this can increase the risk of fire or electrical shock. WARNING: Never push any object through the slots
Inhaltszusammenfassung zur Seite Nr. 7
█ LOCATION OF CONTROLS 1 2 16 17 18 15 3 14 19 4 13 20 5 12 21 6 11 7 10 8 22 9 17 Carrying Clip 1 Visual Phone Ringer 18 Speaker 2 (4) 1-Touch Memory 19 SOS Key Dial Keys 20 Screw Eye 3 Large LCD/Caller ID Screen 21 Battery Compartment 4 Right Soft Key Cover 5 Right/Redial Key 22 Charging Contacts 6 End Key 7 Down/Phonebook Key 8 Hash (Pound) Key 9 Microphone 10 Star Key 11 Lighted Keypad 12 Dial/Speakerphone Key 13 Left/Intercom Key 14 L
Inhaltszusammenfassung zur Seite Nr. 8
LOCATION OF CONTROLS (continued) TOP OF BASE LEFT SIDE 26 23 24 25 BOTTOM OF BASE 27 28 TOP OF BASE LEFT SIDE 23 Charge Indicator 26 Phone (2.5mm) 24 Page Key Headset / 25 Charging Pins Neckloop Jack BOTTOM OF BASE 27 Phone Line Cord Jack 28 AC Power Adapter Jack 8 – ENGLISH
Inhaltszusammenfassung zur Seite Nr. 9
█ KEYS DESCRIPTIONS Handset Dial Key Make/Answer a call. Activates the speakerphone if pressed during a call, as described on page 18. End Key End a call. Long press to activate power on/off, as described on page 20. Navigation Key: Up scroll for lists and menu options Increase the earpiece/speakerphone volume during a call. Enter the Caller ID (CID) book, as described on page 38. Down scroll for lists and menu options Decrease the earpiece/speakerphone volume during a call. Ent
Inhaltszusammenfassung zur Seite Nr. 10
Soft Keys – Two soft keys are used to select functions displayed directly above each of the soft keys (on the bottom line of the display). Functions displayed above the soft key will change as you move through the menu. Star Key - Press and hold to turn on/off keypad lock function. Set up a conference call, as described on page 54. One-touch memories – Store up to 4 numbers for one-touch memory dialing, as described on page 30. 0 Key – In standby mode, press and hold this key until
Inhaltszusammenfassung zur Seite Nr. 11
Off Hook (top right) Indicates the line is engaged. Hands-Free (top right) Indicates the hands-free function (handset speakerphone) is engaged, as described on page 18. Battery Icon (top right) Indicates battery charge level. Shaker Icon (top center) Indicates the shaker and visual ringer are enabled, as described on page 20. Signal Icon (top left) Indicates the current signal strength. If the handset is too far from the base, this icon will blink on the LCD. Alarm Icon (top center) Appear
Inhaltszusammenfassung zur Seite Nr. 12
█ INSTALLATION STEPS ® Installation of your ClearSounds A300 DECT 6.0 Cordless Phone with Sound Boost is easy. There are some basic steps you need to take when you set-up your phone for the first time. If, at any time, you have questions about your phone after ® reading this manual, please contact the ClearSounds Customer Service Department at 1-800-965-9043. 1. PARTS CHECKLIST Check the contents of the box - The A300 should contain: Phone base Cordless Handset Batteries Phone Line
Inhaltszusammenfassung zur Seite Nr. 13
Bottom of base Desk / Table Mounting 1. Connect one end of the 6 ft phone cord to the line jack on the back of the base and connect the other end to a modular phone jack. 2. Plug the AC power adapter into the jack on the bottom of the base, then plug the AC adapter into a standard electrical outlet or surge protector. NOTE: The adapter is required for the phone to work. Wall Mounting 1. Install two self-tapping screws
Inhaltszusammenfassung zur Seite Nr. 14
4. Insert the new batteries. Be sure to observe battery polarity as imprinted on the inside of the compartment. 5. Replace the battery compartment cover by sliding upward until it clicks into place and then use the screwdriver to insert the screw. 6. Replace the memory dial reference card. NOTE: The batteries need to be replaced if they do not recover their full storage capacity after recharging. Check the battery icon on the LCD to see the battery charge level. When replacing the batterie
Inhaltszusammenfassung zur Seite Nr. 15
MENU NAVIGATION █ MENU Screen Navigation If you press the Back soft key from any menu, the phone returns to the previous screen. To return to the main screen at any time, press . The phone will automatically return to the main screen from any menu if no key is pressed for 40 seconds. “Standby” can mean that you are at the main screen or can also mean that you are not on a live call and do not have dial tone engaged. In standby mode, you can press to turn the LCD backlight on/off. T
Inhaltszusammenfassung zur Seite Nr. 16
MENU MAP – this identifies how the menu is displayed for navigation Main Menu Submenu I Submenu II CID (Caller ID) Book Add to PB(Phonebook)(p.39) (p. 36) Delete (p.39) Delete All (p.39) Phonebook (p. 49) New (p.50) Edit (p.52) Delete (p.52) Delete All (p.52) PB Status (p.53) BS (Base) Settings Terminate HS (p. 23) (Headset)(p.25) Dial Mode (p.23) Flash Time (p.23) Modify PIN (Personal Identification Number)(p.24) BS Reset (p.25) HS (Handset) Settings Alarm (p.55) (p. 26) Audio Setup (p.29) Sp
Inhaltszusammenfassung zur Seite Nr. 17
TAM (Telephone Answering Machine) Menu Map Main Menu Submenu I Submenu II Announce (p.42) Message (p.45) New MSG (p.45) Saved MSG (p.45) Delete All (p.46) Memo Record (p.46) TAM Setting (p.40) TAM On/Off (p.40) TAM Alert (p.42) ANNC Select (p.44) Set Ring (p.40) TAM Language (p.41) Remote Code (p.47) TAM Default (p.49) BASIC PHONE FUNCTIONS █ Registering the Handset The supplied handset is already registered to the base unit, and you can register up to 4 additional handsets to the base. 1. B
Inhaltszusammenfassung zur Seite Nr. 18
the Registration tone will sound and the base assigns a number to the handset. If the PIN entered is invalid, a warning tone will sound and the handset will return to the previous registration state. 6. If the base is not found, the handset will behave according to the Out of Range description found on page 28. █ Using the Handset Amplification Function ® Your ClearSounds A300 is equipped with a specialized amplification function designed to adjust to your needs. Flexibility in the man
Inhaltszusammenfassung zur Seite Nr. 19
To adjust the volume, press up or down on the navigation key. You may also pre-select your speakerphone volume by following the instructions in Audio Setup, found on page 29. For optimal speakerphone performance, avoid the following: • Areas with high background noise (The microphone might pick up these sounds and prevent the speakerphone from going into the receiving mode when you finish talking). • Surfaces affected by vibration. • Recessed areas such as in a corner, under a cupboard, or
Inhaltszusammenfassung zur Seite Nr. 20
NOTE: If you set the volume to “Off”, when a call comes in, only the New Call information appears on the LCD and the phone will not ring. NOTE: You can also adjust the ringer volume while you are receiving an incoming call. Press up or down to increase or decrease the volume while the phone is ringing. Visual and Vibrating Ringer You can activate the visual ringer and vibrating handset function. A bright LED light will flash and the handset will vibrate when the phone rings. To turn thi
