Inhaltszusammenfassung zur Seite Nr. 1
Operating Manual
®
ClearSounds CSC1000
™
Amplified Freedom Phone
™
with Full ClearDigital Power
1 – ENGLISH
FRANÇAIS ESPAÑOL ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS PRIOR TO USE Congratulations ..........................................................pg. 4 Important Safety Instructions ............................... pg. 4-6 Location of Controls ............................................... pg. 7-9 Keys Descriptions ....................................................pg. 10 Installation Steps ..............................................pg. 11-14 BASIC TELEPHONE FUNCTIONS Amplification ..................................................
Inhaltszusammenfassung zur Seite Nr. 3
CALLER ID General Information .................................................pg. 34 Receiving & Storing Caller ID Records ...............pg. 34-35 Talking Caller ID .......................................................pg. 35 Caller ID on Call Waiting ..........................................pg. 36 Review Caller ID .......................................................pg. 36 Dial from Caller ID ...................................................pg. 37 Delete Caller ID ....................
Inhaltszusammenfassung zur Seite Nr. 4
PRIOR TO USE INDUSTRY CANADA WARRANTY POLICY Congratulations on your purchase of the CSC1000 phone from ClearSounds Communications®. Please read this User Manual carefully in order to get the best use out of your new telephone. This phone is designed for individuals with mild to severe hearing loss. Keep this manual near the telephone for easy reference. Please visit our website at www.clearsounds.com to register your product, download additional manuals and review trouble- shooting tips.
Inhaltszusammenfassung zur Seite Nr. 5
WARNING: Use only the power supply indicated in the User’s Manual. WARNING: To avoid the possibility of electrical shock, do not use this product near water (For example, near a bathtub, wash basin, kitchen sink or laundry tub, in a wet basement or near a swimming pool) while in the bathtub or shower or when you are wet. If the phone becomes submerged in water, do not attempt to retrieve it until after you have unplugged the AC adapter from the electrical outlet and the line cord from the
Inhaltszusammenfassung zur Seite Nr. 6
WARNING: Never push any object through the slots in the telephone. They can touch dangerous voltage points or short out parts that could results in risk of fire or electrical shock. WARNING: Do not cover slots and opening on the units, they are needed for ventilation and protection against overheating. WARNING: Stop using the telephone if dropped or if it becomes damaged. WARNING: If you or a member of your household has a pacemaker or other medical devices, consult your physician or the
Inhaltszusammenfassung zur Seite Nr. 7
█ LOCATION OF CONTROLS 3 6 4 5 7 8 1 2 9 10 11 27 12 13 14 15 28 16 21 26 24 22 18 17 25 23 20 19 Diagram 1 01. Hook Switch 16. Headset Key 02. Handset Hanger Tab 17. Message waiting / 03. Large LCD/Caller ID Screen New call LED 04. Left Soft Key 18. In Use LED Indicator 05. Right Soft Key 19. Visual P hone Ringer 06. Up/Down Scroll 20. Microphone 07. Handset Tone Control 21. Speak erphone Key 08. Handset Volume Control 22. Redial Key 09. Play/Stop Key 23. Amplify Ac tivation Key 1
Inhaltszusammenfassung zur Seite Nr. 8
LOCATION OF CONTROLS (continued) BACK SIDE 29 30 31 32 33 Diagram 2 LEFT SIDE RIGHT SIDE 34 37 35 38 36 39 Diagram 3 Diagram 4 LEFT SIDE RIGHT SIDE 34. Audio (3.5mm) Headset/ 37. ON/OFF New Call/Voice Neckloop Jack Mail Indicator Switch 35. Telephone (2.5mm) 38. Speakerphone and Ringer Headset / Neckloop Jack Volume Controls 36. Handset Cord Jack 39. Memory Card (Record Speed Dial Names/Numbers) 8 – ENGLISH
Inhaltszusammenfassung zur Seite Nr. 9
BACK SIDE 29. Port for (optional) WALL PLATE ClearSounds Bed Shaker ADAPTER 30. RINGER - Strobe & Shaker / Only Shaker / Only Strobe 31. Amplification Reset Override Switch (ON/OFF) 32. AC Power Adapter Jack 33. Phone Line Cord Jack UNDERSIDE 39. Memory Card 40. Back Light ON/OFF Switch 41. Wall Mount Keyhole Slots 42. Empty Compartment UNDERSIDE HANDSET 40 41 39 42 Diagram 5 9 – ENGLISH
Inhaltszusammenfassung zur Seite Nr. 10
█ KEYS DESCRIPTIONS (21) Make/Answer/End a call Activates the speakerphone if pressed during a call, as described on page 18 (22) Last number redial, as described on page 27 or insert a pause when pre-dialing a number (6) Up or Down or scroll for menu options. Enter the CID book, as described on page 36 Soft Keys (4 & 5) Perform the function indicated by the text immediately over it (on the bottom line o
Inhaltszusammenfassung zur Seite Nr. 11
█ INSTALLATION STEPS Installation of your ClearSounds® CSC1000 Amplified Freedom Phone™ with Full ClearDigital™ Power is easy. There are some basic steps you need to take when you set-up your phone for the first time. 1. Check parts list 2. Pre-select auxiliary features: a. AMPLIFICATION: Amplify Override ON / OFF b. RINGER: Strobe & Shaker / Only Shaker / Only Strobe 3. Installation If at any time you have questions about your telephone after reading this manual, please contact our ClearS
Inhaltszusammenfassung zur Seite Nr. 12
potential interference, the phone should not be located near electronic equipment, such as personal computers, television or microwave ovens. Begin by removing the clear plastic Caller ID protective tab. This film tab is only for display and to protect your Caller ID display during shipping. Desk / Table Mounting 1. Plug the AC power adapter into the jack on the back of the telephone. Wait until the phone is completely setup before plugging the AC adapter into the electrical outlet or sur
Inhaltszusammenfassung zur Seite Nr. 13
Screw head Wall Diagram 9 Diagram 10 1. Slide the handset hanger tab out and reverse its position (rotate it 180 degrees). Slide it back into place so that the hook points up (see Diagram 6). This will keep the handset from falling out of the cradle when it is mounted on the wall. 2. Plug the AC power adapter into the jack on the back of the telephone. Wait until the phone is completely setup before plugging the AC adapter into the electrical outlet or surge protector. NOTE: The adapter
Inhaltszusammenfassung zur Seite Nr. 14
6. Holding the phone slightly above the mounting screws on the wall jack, push the phone against the mounting screws so they are hooked into upper and lower keyhole slots on the back of the phone. Slowly slide the phone down until it snaps into place (see Diagram 8). 7. When mounting the phone on dry wall without a standard telephone wall plate, install 2 self-tapping screws (not supplied) at a distance of 167.5 mm (6½ inches) from each other and located on a vertical line. Place the pho
Inhaltszusammenfassung zur Seite Nr. 15
provides up to 15 dB of volume before the Amplify key is activated. Once the Amplify key activated, the phone will provide up to 55 dB of amplification and tone adjustment. Please Note: The Amplify key controls both the loudness & tone frequency of the handset. Using the Amplification Reset Override Switch (#31) The ClearSounds® CSC1000 is designed with unique features to protect users from being exposed to dangerous sound levels. You are able to switch between automatic or manual amplif
Inhaltszusammenfassung zur Seite Nr. 16
█ Ringer Setting You can adjust the ringer of your phone as high as +95 dB. There are 2 methods to set this feature. Method 1 (Volume Only): By adjusting volume on the right side of the phone In standby mode, you can adjust the ringer volume by using the Volume Control V- or V+ on the right side of the phone. The display will show the current level. For example: Ringer LOW. You will also hear the audible ringer at each level you select. Method 2 (Volume and Custom Features): By using t
Inhaltszusammenfassung zur Seite Nr. 17
from Standard, Wilhelm Tel, Small world, Prelude, Love is blue, Ashita, NO4, NO5, NO1, NO2, Fuga. Each time you press the Change soft key, the phone rings with the selected ring tone. Press the Save soft key or press ▼ to set the VIP tone. 6. If you set the VIP (Very Important Person) tone, when a new call comes in, and the caller’s number has already been stored in the phonebook, the phone will ring with the VIP tone selected. Use the same method as you set the Ringer Tone. Press the Sa
Inhaltszusammenfassung zur Seite Nr. 18
█ Using your Visual Indicator The red flashing visual indicator on the base will flash to alert you to new calls received or if you have a voice mail message waiting from your service provider. To turn this feature OFF, see page 34. █ Using your Phone with Hearing Aids and Cochlear Implants Your phone can be used with hearing aids and cochlear implants equipped with a telecoil (T-coil). Adjust your hearing aid “T- switch” to the “T” position. Make sure to hold the handset close to your T
Inhaltszusammenfassung zur Seite Nr. 19
2. Adjust your volume by using the volume control V- or V+ located on right side of the phone. 3. To end the call, press the Speaker key again on the base. Using a Headset or Neckloop (see page 20) █ Making a Call Using the Handset 1. To make a call, lift the handset and listen for a dial tone. 2. You can dial a number manually or press one of the memory dial keys once programmed. If you make a mistake while entering a number, press the Clear soft key to delete it or hang up and begin agai
Inhaltszusammenfassung zur Seite Nr. 20
5. To change back from speakerphone to handset use, simply pick up the handset to disable the speakerphone. The speakerphone indicator turns OFF. 6. To change back from handset to speakerphone, simply press the Speaker key and then hang up the handset. The speakerphone indicator turns ON and the handset is disabled. Using Audio and Telephone Neckloop/Headset Jacks Your phone is equipped with both Audio and Telephone Headset jacks, providing total flexibility and multi-functionality. Both
