Inhaltszusammenfassung zur Seite Nr. 1
E
N
Clarity C320
G
L
Corded Telephone with Answering Machine
® TM
I
Featuring Clarity Power Technology
S
H
User Guide
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents SAFETY INSTRUCTIONS ................................... 3 UNPACKING THE C320 ..................................... 6 INSTALLATION ..................................................... 7 FEATURES ............................................................. 11 TM • Clarity Power Control ........................................ 12 • Boost Control ....................................................... 12 • Clarity Effect ........................................................
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS E N G When using your telephone equipment, never be placed near or over a radiator L basic safety precautions should always be or heat register. This telephone should I followed to reduce the risk of fire, electric not be placed in a built-in installation shock and persons including the following: unless proper ventilation is provided. S H 1. Read and understand all instructions. 9. Operate this telephone using the elec- trical voltage as stated on the base 2. Follo
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS 14. Unplug this product from the wall 17. Never touch uninsulated telephone outlets and refer servicing to the wires or terminals unless the tele- manufacturer under the following phone line has been disconnected at conditions: the network interface. A. When the power supply cord or 18. Use caution when installing or plug is frayed or damaged. modifying telephone lines. B. If liquid has been spilled into 19. Use only the power cord and batteries the product. indicat
Inhaltszusammenfassung zur Seite Nr. 5
SAFETY INSTRUCTIONS E N G Before installing this equipment, users disconnect the equipment. Users should L should ensure that it is permissible to be ensure for their own protection that the I connected to the facilities of the local tele- electrical ground connections of the communications company. The equipment power utility, telephone lines and internal S must also be installed using an acceptable metallic water pipe system, if present, are H method of connection. In some cases, the connected
Inhaltszusammenfassung zur Seite Nr. 6
UNPACKING THE C320 Inside you will find the following items: equipment. Please call 1-800-552-3368 to exchange this unit for a factory-fresh A. Handset replacement. In addition to the items listed B. Handset Line Cord (Coiled) above, you will need one of the following to C. Base Unit complete installation of this unit: D. Phone Line Cord (long, flat) • Modular Wall Jack, or E. Mounting Bracket • RJ-11C Modular Jack Adapter (if you F. AC Adapter have an older 4-prong jack) G. User’s Guide Careful
Inhaltszusammenfassung zur Seite Nr. 7
INSTALLATION E N G Warning: To prevent electrical shock, • Locate the hinge slots located on L always remove the telephone line cord the right and left side of the back of I from the wall jack before removing the the telephone. cord from the telephone. Never leave the S • Turn wall mount bracket so the wide end line cord connected to the wall jack if it is H (end with rubber feet) of the bracket is not also connected to the telephone. towards the top. AC adapter should be unplugged when • Instal
Inhaltszusammenfassung zur Seite Nr. 8
➤ ➤ INSTALLATION ➤ Installation View Note: If you are plugging the phone into an 120 volt older 4-prong AC adapter outlet jack, use an RJ11C adapter AC adapter Flat cord here plugs-in here RJ-11C Coiled cord plugs-in on this side of phone C320 8
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION E N G To Install As a Wall Unit: L Important: A modular wall jack with raised I mounting pins is required for installation as S a Wall Unit. H • Insert AC Adapter into the jack located on the top side of the telephone. • Locate the hinge slots located on the right and left side of the back of the telephone. • Insert AC Power cord into the straight groove located on the back of the telephone. Back of phone • Turn bracket so that the wide end (end with rubber feet) of the bracket is t
Inhaltszusammenfassung zur Seite Nr. 10
INSTALLATION • When the phone is wall mounted the • When wall mounting the telephone feed handset knob will need to be reversed to the line cord into the angled groove on hold the handset in place. To reverse, pull the back of the telephone and plug into up on the knob and turn a quarter turn wall jack. clockwise. The knob will hold the handset • Hold the C320 so that the holes on the in place when you hang up. mounting bracket line up with the raised • To convert phone from one mounting mountin
Inhaltszusammenfassung zur Seite Nr. 11
C320 FEATURES E N TM 1. Clarity Power Control 12. Answering System Stop 21. Answering System G 2. Boost 13. Answering System Ring Selection 3. Headset Button/ Play/Pause 22. Headset Jack (2.5mm) L Indicator 14. New Call Display 23. Key Pad and Memory I 4. Hold Button/Indicator 15. Answering System Storage Locations 5. Flash Microphone 24. Neckloop Jack (3.5mm) S 6. Last Number Redial 16. Ringer Style 25. AC Adapter Plug In 7. Memory Storage Button 17. Ringer Volume Down 26. Nite Light Off/Lo/Hi
Inhaltszusammenfassung zur Seite Nr. 12
C320 FEATURES Your Clarity telephone is packed with ➤ To Decrease Clarity Power features that will help you improve your Slide the Clarity Power button toward the communications over the telephone. left. The extreme left is the level of a normal telephone conversation. ® TM ➤ Clarity Power Control The Clarity Power Control allows you to ➤ Boost Reset Switch control the clarity of your phone conver- The C320 has a reset switch located on sations. It will let you hear clearly phone the bottom of
Inhaltszusammenfassung zur Seite Nr. 13
E C320 FEATURES N G ➤ Ringer Controls ➤ Visual Ringer L The volume of ring can be adjusted by A lighted visual ringer works in conjunction I pressing the ringer volume up switch or with the low frequency ringer. It sends out S down switch until the desired ring volume a flashing alert every time a phone call is H is achieved. received. (The ringer will light up regard- less of the setting on the ringer volume The style of ring can also be adjusted by control.) pressing the Ringer Style button. S
Inhaltszusammenfassung zur Seite Nr. 14
C320 FEATURES Important: You must have tone signaling The last number dialed will be stored in service to use the tone feature on the the C320 for you until you dial another C320. If in doubt, contact your local tele- number or disconnect the telephone from phone company. the wall jack. ➤ To Set the ➤ Flash TONE/PULSE Switch: Flash is a special feature that is required to use some calling services provided 1. Move the switch towards the by your local phone company, such as correct setting. call
Inhaltszusammenfassung zur Seite Nr. 15
C320 FEATURES E N G You will not be able to hear the person on ➤ Headset Port L the other end and they will not be able to The C320 is equipped with a 2.5 mm I hear you while the Hold Indicator Light jack for use with a compatible headset, is on. The hold light will be on any time the S allowing for use in a hands free mode. To hold button has been pressed. A call will H attach headset, plug the headset into the stay on hold until you pick up a receiver, or headset port located on the right sid
Inhaltszusammenfassung zur Seite Nr. 16
C320 FEATURES 4. Press the BOOST button. ➤ Neck Loop/Auxillary Port 5. Adjust the Clarity Power Control The C320 has a 3.5mm phono jack to use upwards to a level where the other with a neck loop. The volume to the neck party’s voice is heard loud and clear, loop is controlled with the Clarity Power and begin conversation. Control. When the neck loop is plugged in, the receiver in the handset is disabled. 6. When you complete the call, return the handset. ➤ Operations 7. After hanging up, the sou
Inhaltszusammenfassung zur Seite Nr. 17
PROGRAMMING NUMBERS INTO MEMORY E N G ➤ Memory Storage Locations ➤ Dialing From Memory L The C320 allows you to program ten (10) 1. Pick up the handset. I indirect or two touch memory locations on 2. Press the MEMORY button. S the telephone (keys 0-9) that can be H 3. Press the number on the keypad where programmed to dial frequently called the number to be dialed has been stored. numbers of up to 16 digits. You can also program numbers into the three (3) extra 4. The call will dial automaticall
Inhaltszusammenfassung zur Seite Nr. 18
ANSWERING SYSTEM OPERATION 2. After the beep, begin recording. Answering System Speak clearly into the MIC in the base IMPORTANT: You must record an out- (not handset) to record your outgoing going message in order for the answer- announcement. The record time of the ing system to function. The display will outgoing message will be displayed flash OR indicating outgoing message while recording. needs to be recorded. 3. When finished, press STOP. The C320 answering system will be ON 4. The outgo
Inhaltszusammenfassung zur Seite Nr. 19
E ANSWERING SYSTEM OPERATION N G Monitoring Incoming Calls During Playback L You are able to hear messages as your I To Pause a Message callers leave them through the speaker in S Press the PLAY/PAUSE button to pause the base. Lifting the handset while a caller H a message while playing. The PLAY is leaving a message will stop recording button will flash Green while message and allow you to talk. playback is paused. Pressing PLAY will resume message playback. During pause, Listening to Messages
Inhaltszusammenfassung zur Seite Nr. 20
ANSWERING SYSTEM OPERATION Handset Mode monitor the outgoing message announce- ment and the new incoming message. To If a new phone call if received during speak to the caller, lift the handset. message playback in the handset mode (handset off hook), message playback will continue. The visual ringer will flash to Deleting Messages indicate the incoming call but the phone To delete a specific message press the will not ring. To answer the phone call, DELETE button while the message is press the
