Inhaltszusammenfassung zur Seite Nr. 1
Complete user’s manual
TL92273/TL92373/TL92473
DECT 6.0 cordless telephone/
answering system with
BLUETOOTH® wireless technology
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety information section on pages 121-122 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. This telephone system is compatible with certai
Inhaltszusammenfassung zur Seite Nr. 3
THIS SIDE UP THIS SIDE UP THIS SIDE UP / CE CÔTÉ VERS LE HAUT / CE CÔTÉ VERS LE HAUT / CE CÔTÉ VERS LE HAUT THIS SIDE UP THIS SIDE UP / CE CÔTÉ VERS LE HAUT / CE CÔTÉ VERS LE HAUT THIS SIDE UP / CE CÔTÉ VERS LE HAUT Battery Pack / Bloc-piles Battery Pack / Bloc-piles Battery Pack / Bloc-piles : : : Battery Pack / Bloc-piles Battery Pack / Bloc-piles BT183342/BT283342 (2.4V 400mAh Ni-MH) BT183342/BT283342 (2.4V 400mAh Ni-MH) : BT183342/BT283342 (2.4V 400mAh Ni-MH) Battery Pack / Bloc-piles : : BT
Inhaltszusammenfassung zur Seite Nr. 4
Complete user’s manual TL92273/TL92373/TL92473 DECT 6.0 cordless telephone/ answering system with BLUETOOTH® wireless technology Table of contents device .......................................................21 Getting started Remove a device................................. 22 Quick reference guide - telephone Replace an active device ................23 base ...................................................................1 Download directory ...........................24 Quick reference
Inhaltszusammenfassung zur Seite Nr. 5
QUIET mode ..........................................38 End a PTT call .......................................60 No line alert ..........................................39 Answer an incoming call Cell alert ................................................39 during PTT ..............................................61 Make an outgoing call during Telephone operation PTT .............................................................61 Telephone operation...............................40 Directory
Inhaltszusammenfassung zur Seite Nr. 6
Handset alert tones ...........................98 Answering system Telephone base alert tones ...........98 Answering system settings ..................77 Lights ..............................................................99 Announcement ....................................77 Handset indicator lights ..................99 Answer on/off ......................................79 Telephone base indicator lights ...99 Call screening .......................................80 Screen messages .........
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Quick reference guide - telephone base /ANS ON/OFF Press to turn the answering system on or off (page 79). /PLAY/STOP • Press to play messages (page 88). • Press to stop message playback (page 88). /SKIP Press to skip to the next message (page 88). /REPEAT Press to repeat a message or press twice to play the previous message (page 88). X/DELETE /HANDSET LOCATOR • Press to delete the message currently playing Press to page all system handsets (page 88). (page 48). • When the
Inhaltszusammenfassung zur Seite Nr. 8
Getting started Quick reference guide - handset CHARGE light On when the handset is charging in the telephone base or charger. Softkeys (2) • Press to select the menu item displayed above the key. • While in a menu, press to select an item or save an entry or setting. CELL 1/ CELL 2 • Press to make or answer a cell call. • During a call, press to answer an incoming CELL 1/2 call when you hear a call waiting alert (page 43). HOME/FLASH • Press to make, answer or end a home call. • During a
Inhaltszusammenfassung zur Seite Nr. 9
Getting started Quick reference guide - handset DIR/VOLUME • Press to scroll up while in menus. • During a call or message playback, press to increase the listening volume. • Press to show directory entries when the telephone is not in use. • While entering names or numbers in the directory, press to move the cursor to the right. CID/VOLUME • Press to scroll down while in menus. • During a call or message playback, press to decrease the listening volume. • Press to show the caller ID histor
Inhaltszusammenfassung zur Seite Nr. 10
Getting started Quick reference guide - handset PUSH TO TALK • Press to display the PTT menu to begin a PTT call (page 57). • Press and hold to begin a one-to-group broadcast when the handset is not in use (page 58). Feature menu • Play messages • Answering sys • Directory • Caller ID log Main menu • Intercom The selected menu item is highlighted. • Bluetooth • Ringers • Set date/time • Caller ID annc • Settings • Web address Menu Using menus 1. Press MENU in idle mode (when the telephone
Inhaltszusammenfassung zur Seite Nr. 11
Getting started Installation You must install and charge the See pages 7-8 for easy handset battery before using the instructions. cordless handset. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (page 9). For optimum range and better reception, place the telephone base in a central and open location. You may hear interference if your cellular phone
Inhaltszusammenfassung zur Seite Nr. 12
Getting started Telephone base and charger installation Install the telephone base and charger as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see Installation options on page 9 for details. Telephone base installation Plug one end of the telephone line cord into a Plug the large end telephone jack or a DSL filter. of the telephone If you have DSL high-speed base power adapter Internet service, a DSL filter (not included) is required.
Inhaltszusammenfassung zur Seite Nr. 13
Getting started Battery installation and charging Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after 11 hours of continuous charging. See the table on page 127 for battery operating times. If the screen is blank, you need to charge the han
Inhaltszusammenfassung zur Seite Nr. 14
Getting started Battery installation and charging Step 1 Step 2 Plug the battery connector Align the cover flat securely into the socket against the battery inside the handset battery compartment, then compartment. Insert the slide it upwards until supplied battery with the it clicks into place. label THIS SIDE UP facing up as indicated. CHARGE light Step 3 Charge the handset by placing it face forward in the telephone base or charger. The CHARGE light on the top of the handset is on duri
Inhaltszusammenfassung zur Seite Nr. 15
Getting started Installation options Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to attach to a standard dual-stud telephone wall mounting plate. If you do not have this wall mounting plate, you can purchase one from many hardware or consumer electronics retailers. You may need a professional to install the wall mounting plate. Tabletop to wall mount installation 1. Unplug the power adapter from the power o
Inhaltszusammenfassung zur Seite Nr. 16
Getting started Installation options 3. Plug the telephone line cord (or DSL filter) into the wall jack. Plug the power adapter into a power outlet not controlled by a wall switch. 4. Hold the cords to the side of the telephone base. Align the upper slots on the back of the telephone base just above the upper tabs (marked A) of the wall mount bracket. Make sure the lower slots of the telephone base are also aligned above the lower tabs (marked B) of the wall mount bracket. Push the teleph
Inhaltszusammenfassung zur Seite Nr. 17
Getting started Installation options 5. Bundle the telephone line cord and power adapter cord neatly with twist ties. Place the bundled cords into the space behind the telephone base. Wall mount to tabletop installation To change the telephone base from the wall mount position to tabletop position, follow the steps below. 1. If the telephone line cord and power adapter cord are bundled, untie them first. Push the wall mount bracket up to remove it from the wall. 2. Unplug the telephone line c
Inhaltszusammenfassung zur Seite Nr. 18
Bluet Bluetooth ooth Introducing Bluetooth Your new AT&T TL92273/TL92373/TL92473 telephone system with Bluetooth wireless technology has the following features: • Pair up to 4 Bluetooth enabled devices (cell phones or headsets) with the telephone base. • Connect a maximum of 2 cell phones to make and receive cell calls. Both cell phones can be active on a call at a time. • Connect a Bluetooth enabled headset for making and receiving home calls. • Conference any combination of cell and home ca
Inhaltszusammenfassung zur Seite Nr. 19
Bluetooth Introducing Bluetooth IMPORTANT INFORMATION • After plugging in the telephone base, wait at least 20 seconds before connecting a Bluetooth device. The screen shows Bluetooth system busy if you try to connect too soon. • Refer to the user's manual of your Bluetooth enabled cell phone or headset for more information about how that device uses Bluetooth connectivity. • Bluetooth wireless technology operates within a short range (up to 30 feet) from the telephone base. Keep connected c
Inhaltszusammenfassung zur Seite Nr. 20
Bluetooth Introducing Bluetooth • Charge your cell phone while it is connected to the telephone base. Your cell phone's battery discharges faster while it is connected to the telephone base via Bluetooth wireless technology. • Monitor your cell phone's usage, because minutes may be deducted from your cellular plan for the duration of all cell calls, depending on the terms of your plan. Refer to the Bluetooth setup section (pages 16-27) to learn how to set up your Bluetooth device. Refer to
