Inhaltszusammenfassung zur Seite Nr. 1
User’s manual
CL84109/CL84209/CL84309
DECT 6.0 corded/cordless
telephone/answering system
with caller ID/call waiting
Inhaltszusammenfassung zur Seite Nr. 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 79-80 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: CL84109 (one handset) CL84209 (two handsets
Inhaltszusammenfassung zur Seite Nr. 3
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual Quick start guide CL84109/CL84209/CL84309 CL84109/CL84209/CL84309 DECT 6.0 corded/cordless DECT 6.0 corded/cordless telephone/answering system telephone/answering system with caller ID/call waiting with caller ID/call waiting User's manual Quick start guide Cordless handset Telephone base (One for CL84109) (Two for CL842
Inhaltszusammenfassung zur Seite Nr. 4
User’s manual CL84109/CL84209/CL84309 DECT 6.0 corded/cordless telephone/answering system with caller ID/call waiting Table of contents Getting started Quick reference guide - handset .......... 1 Telephone base settings ........................ 23 Quick reference guide - telephone Menu settings ...........................................23 base ..................................................................3 Ringer volume .......................................... 23 Installation ......
Inhaltszusammenfassung zur Seite Nr. 5
Intercom ......................................................... 34 New message indication ..................... 56 Answer an incoming call during an Call screening at the telephone intercom call ........................................... 35 base ............................................................... 56 Call transfer using intercom ................ 36 Call intercept ............................................ 56 Base ringer ................................................ 56 Dire
Inhaltszusammenfassung zur Seite Nr. 6
answering systems ................................80 Appendix G FCC part 68 and ACTA ............................ 81 Appendix H FCC part 15 .................................................. 82 Appendix I Limited warranty ........................................ 83 Appendix J Technical specifications ......................... 85 DECT 6.0 digital technology .............. 85 Telephone operating range ............... 85 Redefining long range coverage and clarity .................................
Inhaltszusammenfassung zur Seite Nr. 7
Getting started Quick reference guide - handset MENU/SELECT CHARGE indicator Press to show the menu. On when the handset is charging in the charger. While in the menu, press to select an item or save an entry qCID/-VOLUME or setting. Press qCID to show caller ID DIR p/+VOLUME history (page 50). Press DIR p to show directory Press to scroll down while in entries (page 43). menus. Press to scroll up while in While entering names or menus. numbers, press to move the While entering names
Inhaltszusammenfassung zur Seite Nr. 8
Getting started Quick reference guide - handset Main menu Main menu ANS. SYSTEM (page 55) The > symbol highlights a menu item. DIRECTORY (page 38) CALL LOG (page 47) >ANS. SYSTEM RINGER VOLUME (page 14) DIRECTORY RINGER TONE (page 15) KEY TONE (page 15) LCD LANGUAGE (page 15) SET DATE/TIME (page 16) CLR VOICEMAIL (page 17) HOME AREA CODE (page 18) Menu Using menus Press MENU/SELECT to show the main menu. Press qCID or DIR p to scroll through menu items. Press MENU/SELECT to select or save ch
Inhaltszusammenfassung zur Seite Nr. 9
Getting started Quick reference guide - telephone base • CLEAR: While using menus, press to cancel an operation, back up to the • INTERCOM/HANDSET LOCATOR: While phone is idle, previous menu or exit the press to page all handsets (page 33) or initiate an intercom call menu display. (page 35). • qCID: Press when the • FLASH: During a call, press to answer an incoming call when phone is idle to display you receive a call waiting alert (page 31). the call history (page 50). Press to scro
Inhaltszusammenfassung zur Seite Nr. 10
Getting started Installation You must install and charge See pages 8-9 the battery before using the STOP! for easy instructions. telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 10). For optimum range and better reception, place the telephone base in a central and open location. If you subscribe to high-speed Internet service (digi
Inhaltszusammenfassung zur Seite Nr. 11
Getting started Backup batteries installation and use In the event of a power failure, your telephone can still operate with limited functions if there are backup batteries (purchased separately) installed in the telephone base. If a power failure happens during a call on the corded handset, the call continues (at the lowest volume) until you hang up; while a call on the cordless handset or speakerphone disconnects immediately. During a power failure, you can still make and answer calls usi
Inhaltszusammenfassung zur Seite Nr. 12
Getting started Telephone base installation Install the telephone base as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, see page 10 for details. 7. Plug the large end 1. Plug the small end of the of the AC power AC power adapter into the adapter into a power power jack on the bottom of the telephone base. outlet not controlled by a wall switch. 2. Plug one end of the 6. Plug the other telephone line cord end of the into the telephon
Inhaltszusammenfassung zur Seite Nr. 13
Getting started Charger installation Install the charger as shown below. Plug the power adapter into an electrical outlet not controlled by a wall switch. IMPORTANT INFORMATION 1. Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs ar
Inhaltszusammenfassung zur Seite Nr. 14
Getting started Battery installation & charging Install the battery as shown below. Once you have installed the battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See the table on page 85 for battery operating times. If the screen is blank, you need t
Inhaltszusammenfassung zur Seite Nr. 15
Getting started Battery installation & charging CHARGE light Step 3 Charge the handset by placing it face up in the charger. The CHARGE light will be on when charging. IMPORTANT INFORMATION 1. Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. 2. If you do not use the handset for a long time, disconnect and remove the battery to prevent possible lea
Inhaltszusammenfassung zur Seite Nr. 16
Getting started Installation options The telephone base comes with the mounting bracket already installed for desktop use. If you want to mount your telephone on a wall, move the mounting bracket so the telephone can connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. You might need a professional to install the mounting plate. Desktop to wall-mount installation To
Inhaltszusammenfassung zur Seite Nr. 17
Getting started Installation options 2. Connect the telephone line cord and 3. Place the bundled telephone line power adapter cord to the jacks on cord and power adapter cord into the bottom of the telephone base. the cavity under the telephone Bundle the telephone cord and power base as shown below. Align the adapter cord, and secure them with a mounting studs on the telephone twist tie. Plug the power adapter and outlet plate with the mounting telephone line into the wall outlets. hole
Inhaltszusammenfassung zur Seite Nr. 18
Getting started Installation options Wall-mount to desktop installation To change the telephone base from the wall-mount position to desktop position: 1. Untie the bundled telephone cord and power adapter cord, and make sure that you unplug the power adapter and telephone line cord from the wall outlets before you begin. 2. Remove the telephone base from the wall. 3. Push as indicated by arrows in the illustration until the bracket is released, and swing it upward until it clicks into the
Inhaltszusammenfassung zur Seite Nr. 19
Getting started Installation options 4. Connect the telephone line cord and power adapter cord to the jacks on the bottom of the telephone base. Plug the power adapter and telephone line into the wall outlets. 5. Remove the corded telephone handset tab, rotate and replace for desktop use. 13
Inhaltszusammenfassung zur Seite Nr. 20
Telephone settings Handset settings Menu settings Use the feature menu on the handset to customize how >ANS. SYSTEM the handset works. Refer to page 23 to customize how the DIRECTORY telephone base works. 1. Press MENU/SELECT when in idle mode (when the phone is not in use) to enter the main menu. 2. Press qCID or DIR p to scroll to the feature you want to change. When scrolling through the menu, the top menu item is always highlighted with a > symbol. 3. Press MENU/SELECT to select the hi
