Inhaltszusammenfassung zur Seite Nr. 1
TigerSwitch 10/100
16-Port Fast Ethernet Switch
◆ 16 10BASE-T/100BASE-TX ports
◆ Optional 1000BASE-X or 100BASE-FX modules
◆ 8.8 Gbps of aggregate bandwidth
◆ Non-blocking switching architecture
◆ Spanning Tree Protocol
◆ Up to four port trunks
◆ RADIUS and TACACS+ authentication
◆ Rate limiting for bandwidth management
◆ QoS support for four-level priority
◆ Full support for VLANs with GVRP
◆ IP Multicasting with IGMP Snooping
◆ Manageable via console, Web, SNMP/RMON
Management Guide
SMC6716AL2
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
TigerSwitch 10/100 Installation Guide From SMC’s Tiger line of feature-rich workgroup LAN solutions 38 Tesla Irvine, CA 92618 July 2004 Phone: (949) 679-8000 Pub. # 150000013500H
Inhaltszusammenfassung zur Seite Nr. 4
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2004 by SMC Networks, Inc. 38 Tesla Irvine, CA 92618. All rights r
Inhaltszusammenfassung zur Seite Nr. 5
LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable
Inhaltszusammenfassung zur Seite Nr. 6
WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES
Inhaltszusammenfassung zur Seite Nr. 7
Contents Chapter 1: Introduction 1-1 Key Features 1-1 Description of Software Features 1-2 System Defaults 1-5 Chapter 2: Initial Configuration 2-1 Connecting to the Switch 2-1 Configuration Options 2-1 Required Connections 2-2 Remote Connections 2-3 Basic Configuration 2-3 Console Connection 2-3 Setting Passwords 2-4 Setting an IP Address 2-4 Manual Configuration 2-4 Dynamic Configuration 2-5 Enabling SNMP Management Access 2-6 Community Strings 2-6 Trap Receivers 2-7 Saving Configuration Se
Inhaltszusammenfassung zur Seite Nr. 8
Contents Console Port Settings 3-19 Telnet Settings 3-21 Configuring Event Logging 3-23 System Log Configuration 3-23 Remote Logs Configuration 3-25 Displaying Log Messages 3-26 Resetting the System 3-27 Setting the System Clock 3-27 Configuring SNTP 3-28 Setting the Time Zone 3-29 Simple Network Management Protocol 3-29 Setting Community Access Strings 3-30 Specifying Trap Managers and Trap Types 3-31 User Authentication 3-32 Configuring User Accounts 3-32 Configuring Local/Remote Logon Authe
Inhaltszusammenfassung zur Seite Nr. 9
Contents Setting Broadcast Storm Thresholds 3-77 Configuring Port Mirroring 3-79 Configuring Rate Limits 3-80 Rate Limit Granularity 3-80 Rate Limit Configuration 3-81 Showing Port Statistics 3-82 Address Table Settings 3-86 Setting Static Addresses 3-86 Displaying the Address Table 3-87 Changing the Aging Time 3-89 Spanning Tree Algorithm Configuration 3-89 Displaying Global Settings 3-90 Configuring Global Settings 3-93 Displaying Interface Settings 3-96 Configuring Interface Settings 3-99 VL
Inhaltszusammenfassung zur Seite Nr. 10
Contents Configuring IGMP Snooping and Query Parameters 3-133 Displaying Interfaces Attached to a Multicast Router 3-135 Specifying Static Interfaces for a Multicast Router 3-136 Displaying Port Members of Multicast Services 3-137 Assigning Ports to Multicast Services 3-138 Chapter 4: Command Line Interface 4-1 Using the Command Line Interface 4-1 Accessing the CLI 4-1 Console Connection 4-1 Telnet Connection 4-1 Entering Commands 4-3 Keywords and Arguments 4-3 Minimum Abbreviation 4-3 Command C
Inhaltszusammenfassung zur Seite Nr. 11
Contents reload 4-22 end 4-22 exit 4-23 quit 4-23 System Management Commands 4-24 Device Designation Commands 4-24 prompt 4-24 hostname 4-25 User Access Commands 4-25 username 4-26 enable password 4-27 IP Filter Commands 4-28 management 4-28 show management 4-29 Web Server Commands 4-30 ip http port 4-30 ip http server 4-30 ip http secure-server 4-31 ip http secure-port 4-32 Telnet Server Commands 4-33 ip telnet port 4-33 ip telnet server 4-33 Secure Shell Commands 4-34 ip ssh server 4-36 ip ssh
Inhaltszusammenfassung zur Seite Nr. 12
Contents sntp server 4-51 sntp poll 4-51 show sntp 4-52 clock timezone 4-52 calendar set 4-53 show calendar 4-53 System Status Commands 4-54 light unit 4-54 show startup-config 4-55 show running-config 4-56 show system 4-58 show users 4-58 show version 4-59 Frame Size Commands 4-60 jumbo frame 4-60 Flash/File Commands 4-61 copy 4-61 delete 4-64 dir 4-64 whichboot 4-65 boot system 4-66 Authentication Commands 4-67 Authentication Sequence 4-67 authentication login 4-67 authentication enable 4-
Inhaltszusammenfassung zur Seite Nr. 13
Contents dot1x re-authenticate 4-80 dot1x re-authentication 4-80 dot1x timeout quiet-period 4-81 dot1x timeout re-authperiod 4-81 dot1x timeout tx-period 4-82 show dot1x 4-82 Access Control List Commands 4-85 IP ACLs 4-86 access-list ip 4-86 permit, deny (Standard ACL) 4-87 permit, deny (Extended ACL) 4-88 show ip access-list 4-90 ip access-group 4-90 show ip access-group 4-91 map access-list ip 4-91 show map access-list ip 4-92 MAC ACLs 4-93 access-list mac 4-93 permit, deny (MAC ACL) 4-94
Inhaltszusammenfassung zur Seite Nr. 14
Contents show interfaces counters 4-112 show interfaces switchport 4-113 Mirror Port Commands 4-115 port monitor 4-115 show port monitor 4-116 Rate Limit Commands 4-117 rate-limit 4-117 rate-limit granularity 4-118 show rate-limit 4-118 Link Aggregation Commands 4-119 channel-group 4-120 lacp 4-121 lacp system-priority 4-122 lacp admin-key (Ethernet Interface) 4-123 lacp admin-key (Port Channel) 4-124 lacp port-priority 4-125 show lacp 4-125 Address Table Commands 4-129 mac-address-table static
Inhaltszusammenfassung zur Seite Nr. 15
Contents switchport mode 4-148 switchport acceptable-frame-types 4-148 switchport ingress-filtering 4-149 switchport native vlan 4-150 switchport allowed vlan 4-151 switchport forbidden vlan 4-152 Displaying VLAN Information 4-153 show vlan 4-153 Configuring Private VLANs 4-154 private-vlan 4-155 private vlan association 4-156 switchport mode private-vlan 4-156 switchport private-vlan host-association 4-157 switchport private-vlan mapping 4-158 show vlan private-vlan 4-158 GVRP and Bridge Exte
Inhaltszusammenfassung zur Seite Nr. 16
Contents ip igmp snooping version 4-178 show ip igmp snooping 4-178 show mac-address-table multicast 4-179 IGMP Query Commands (Layer 2) 4-180 ip igmp snooping querier 4-180 ip igmp snooping query-count 4-180 ip igmp snooping query-interval 4-181 ip igmp snooping query-max-response-time 4-182 ip igmp snooping router-port-expire-time 4-182 Static Multicast Routing Commands 4-183 ip igmp snooping vlan mrouter 4-183 show ip igmp snooping mrouter 4-184 IP Interface Commands 4-185 ip address 4-185
Inhaltszusammenfassung zur Seite Nr. 17
Tables Table 1-1. Key Features 1-1 Table 1-2. System Defaults 1-5 Table 3-1. Configuration Options 3-3 Table 3-2. Main Menu 3-4 Table 3-3. Logging Levels 3-24 Table 3-4. Compatible Operating Systems 3-37 Table 3-5. 802.1x Statistics 3-51 Table 3-6. LACP Statistics 3-73 Table 3-7. Displaying LACP Local Settings 3-74 Table 3-8. Displaying LACP Remote Settings 3-76 Table 3-9. Port Statistics 3-82 Table 3-10. Egress Queue Priority Mapping 3-122 Table 3-11. Priority Level Descriptions 3-122 Table 3-1
Inhaltszusammenfassung zur Seite Nr. 18
Tables Table 4-27. Authentication Sequence 4-67 Table 4-28. RADIUS Client Commands 4-69 Table 4-29. TACACS Commands 4-73 Table 4-30. Port Security Commands 4-75 Table 4-31. 802.1x Port Authentication 4-77 Table 4-33. IP ACLs 4-86 Table 4-32. Access Control Lists 4-86 Table 4-34. Egress Queue Priority Mapping 4-92 Table 4-35. MAC ACLs 4-93 Table 4-36. Egress Queue Priority Mapping 4-97 Table 4-37. ACL Information 4-98 Table 4-38. SNMP Commands 4-99 Table 4-39. Interface Commands 4-104 Table 4-40.
Inhaltszusammenfassung zur Seite Nr. 19
Figures Figure 3-1. Home Page 3-2 Figure 3-2. Front Panel Indicators 3-3 Figure 3-3. Displaying System Information 3-8 Figure 3-4. Displaying Switch Information 3-10 Figure 3-5. Displaying Bridge Extension Configuration 3-11 Figure 3-6. IP Configuration 3-13 Figure 3-7. IP Configuration using DHCP 3-14 Figure 3-8. Operation Code Image File Transfer 3-16 Figure 3-9. Select Start-Up Operation File 3-16 Figure 3-10. Deleting Files 3-17 Figure 3-11. Copy Configuration Settings 3-18 Figure 3-12. Sett
Inhaltszusammenfassung zur Seite Nr. 20
Figures Figure 3-43. LACP Port Configuration 3-71 Figure 3-44. Displaying LACP Port Counters 3-73 Figure 3-45. Displaying LACP Port Internal Information 3-75 Figure 3-46. Displaying LACP Port Neighbors Information 3-76 Figure 3-47. Enabling Port Broadcast Control 3-78 Figure 3-48. Mirror Port Configuration 3-79 Figure 3-49. Rate Limit Granularity Configuration 3-80 Figure 3-50. Output Rate Limit Port Configuration 3-81 Figure 3-51. Port Statistics 3-85 Figure 3-52. Configuring a Static Address T
