Inhaltszusammenfassung zur Seite Nr. 1
USB 2.0 Hi-Speed
4-Port Hub
User Manual
P73965 F5U224
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Please read this manual thoroughly and follow the procedures to prevent any damage to the 4-Port USB 2.0 Hub and/or to the connected devices. Congratulations and thank you for purchasing the Belkin 4-Port USB 2.0 Hub (the Hub). The Hub provides four downstream USB ports that are compatible with both USB 1.1 (low- and full-speed) devices, as well as with USB 2.0 (high-speed) devices. This means that the Hub is “backward-compatible” with all of your current USB 1.1 devices and also w
Inhaltszusammenfassung zur Seite Nr. 4
Features • Compliant with Universal Serial Bus specification 2.0 (data rate 1.5/12/480Mbps) • Backward-compatible with Universal Serial Bus Specification 1.1 (data rate 1.5/12Mbps) ® • Compatible with Windows 98SE, Me, 2000, and XP • USB Implementers Forum (USB-IF) approval • Plug-and-Play technology • Support for “hot swapping” of USB devices • Per-port over-current detection and protection • Individual port-status indicator LEDs • Four 480Mbps downstream ports • Fully compatible with USB 1.1
Inhaltszusammenfassung zur Seite Nr. 5
Technical Specifications Upstream Ports: (1) Downstream Ports: (4) Per-Port Voltage: DC +5V Per-Port Current: 500mA (max.) Power Mode: Self-powered Operation Temperature: 5°C~40°C Storage Temperature: -20°C~60°C Enclosure: Plastic Power Supply: Input: 120V AC Output: DC 6V 2.5A Plug Size: 5.5mm (outer) 2.1mm (center) Plug Polarity: Center Positive 3
Inhaltszusammenfassung zur Seite Nr. 6
Technical Specifications (continued) Main Power LED ColorDefinitions: Off Not operational Steady Red Operational Port-Status LED Color Definitions: Off Not operational Amber Error condition Steady Green Fully operational Blinking Off/Green Software attention Blinking Off/Amber Hardware attention 4
Inhaltszusammenfassung zur Seite Nr. 7
Product Detail Figure 1 Per-Port Status LED Power LED DC 6V 2.5A Upstream Port Downstream Power Jack Ports 5
Inhaltszusammenfassung zur Seite Nr. 8
Hardware Installation 1. Plug the AC adapter into a wall outlet or surge suppressor. Plug the DC connector into the DC power jack found on the back of the Hub (See Figure 1). 2. Plug the USB-A cable connector into the downstream port of your computer, or downstream port of another hub. (See Figure 2). Important Note: The Hub must be connected to a USB 2.0-compliant host in order to function in high-speed mode (480Mbps data rate). If connected to a USB 1.1-compliant host, the Hub will operate on
Inhaltszusammenfassung zur Seite Nr. 9
Hardware Installation (continued) USB-A Connector USB-B Connector Figure 2 Figure 3 Port 1 Port 2 Upstream Port Port 3 Port 4 Figure 4 7
Inhaltszusammenfassung zur Seite Nr. 10
Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: F5U224 to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference tha
Inhaltszusammenfassung zur Seite Nr. 11
For technical support call 800.223.5546 x2263 Belkin Components 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Unit 13 • Gatelodge Close • Round Spinney Northampton • Northants • NN3 8RX • United Kingdom Tel: +44 (0) 1604678300 Fax: +44 (0) 1604678330 Belkin Components B.V. Starparc Building • Boeing Avenue 333 1119 PH Schiphol-Rijk • The Netherlands Tel: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components Ltd. 7 Bowen Cr
Inhaltszusammenfassung zur Seite Nr. 12
