Inhaltszusammenfassung zur Seite Nr. 1
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 1
™
OmniView
KVM Switch with CAT5 Extension
Control up to 16 servers located up to 1000 feet away
from your KVM Switch with up to two consoles
• Expandable for control of up to 256 servers from four consoles
User Manual
ENTERPRISE Quad-Bus Series
F1DW116C
F1DW216C
Inhaltszusammenfassung zur Seite Nr. 2
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 2 TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Feature Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Equipment Requirements . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 3
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 1 INTRODUCTION Congratulations on your purchase of this Belkin OmniView ENTERPRISE Quad-Bus Series KVM Switch with CAT5 Extension (the Switch). Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a competitive price. Designed to give you control over multiple computers and servers from up to four consoles, the Switch comes in a variety of capacities suitable for all configurations, lar
Inhaltszusammenfassung zur Seite Nr. 4
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 2 INTRODUCTION This manual provides detailed information about your new Switch, from installation and operation to troubleshooting—in the unlikely event of a problem. From time to time, Belkin may release updates to this product; updated user information will be available from our website at belkin.com For quick, easy installation instructions, please refer to the included Quick Installation Guide. Thank you for purchasing the Belkin OmniView ENTER
Inhaltszusammenfassung zur Seite Nr. 5
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 3 OVERVIEW Feature Overview Quad-Bus Technology Our proprietary way to enable multiple Switches to be daisy-chained together; Belkin quad-bus KVM products let you expand up to a maximum of four consoles to simultaneously control up to 256 computers. CAT5 Extension Technology This included feature lets users control their servers from up to 1000 feet away from the Switch. Integrated Dual-Console Support* For simultaneous control of up to 256 compute
Inhaltszusammenfassung zur Seite Nr. 6
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 4 OVERVIEW Hot Keys Hot key functionality allows you to select a port using key commands; hot key sequences let you select one computer from as many as 256 computers, instantly. Reprogrammable Hot Key Initiator Sequence The Switch allows you to select up to six alternate keys to initiate hot key commands; this creates compatibility with keyboards that either do not feature identical keys or that may have programmed identical keys to perform other f
Inhaltszusammenfassung zur Seite Nr. 7
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 5 OVERVIEW Equipment Requirements To connect the Switch to each computer, a specialized Belkin OmniView ENTERPRISE Series Server Interface Module (F1DE101A-AP) and a CAT5 or CAT6 patch cable is required per computer. To connect multiple BANKs together, a specialized Belkin OmniView ENTERPRISE Quad-Bus Series Daisy-Chain KVM Cable is required. Patch Cables A3L980-XX (CAT6) A3L850-XX (CAT5) A7J304-XX (CAT5) A3L791-XX (CAT5) OmniView ENTERPRISE Qua
Inhaltszusammenfassung zur Seite Nr. 8
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 6 OVERVIEW Product Specifications Part No.: F1DW116C, F1DW216C Power: 100-240VAC @ 47–63Hz, single phase, 0.25A @ 117VAC, 0.15A @ 240VAC Daisy-Chain: Maximum of 16 BANKs, including 4 consoles Max. Number of PCs: 16 per BANK = 256 total Keyboard Emulation: PS/2 & USB Mouse Emulation: PS/2 & USB Monitors Supported: VGA, SVGA, MultiSync®, LCD monitors that accept analog input Max. Host Connections: 16 Keyboard Input: 6-pin miniDIN (PS/2), USB type
Inhaltszusammenfassung zur Seite Nr. 9
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 7 OVERVIEW Unit Display Diagrams Console LED to indicate Front View of the Switch (F1DW216C) that this BANK is a Primary console Manual BANK scroll buttons Auto-Scan Flip-down front fascia LEDs for selected port 7-segment LED for selected Dual manual AutoScan button with and console identification direct-access BANK address identification LED to indicate AutoScan (in daisy-chain mode) port selectors Mode is active Manual BANK scroll buttons Front
Inhaltszusammenfassung zur Seite Nr. 10
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 8 OVERVIEW Front View with Fascia Flipped Down (F1DW116C) Flash-upgrade port, Reset button USB Type B Flip-down front fascia BANK selection DIP switch Back View of the KVM Switch (F1DW216C) Console 1 Console 2 Video console CAT5 connectors Video compensation ports VGA switches Daisy-chain port, In PS/2 mouse Daisy-chain Power switch console port port, Out IEC power connector PS/2 keyboard console port USB Console ports, Type A 8
Inhaltszusammenfassung zur Seite Nr. 11
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 9 INSTALLATION Pre-Configuration The enclosure of the Switch is designed for desktop or rack-mount configuration. The Switch is rack-mountable in standard 19-inch server racks. Rack-mount hardware is included with these Switches for a sturdy rack installation. Anti-skid feet are included for stable desktop configurations. Consider the following when deciding where to place the Switch: • Whether or not you intend to use the direct-access port select
Inhaltszusammenfassung zur Seite Nr. 12
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 10 INSTALLATION 1. Remove the brackets from the box. 2. Align the bracket with the front of the Switch for flush installation in your rack. 3. Attach the bracket to the side of your Switch with the screws provided. 4. Mount the Switch to the rack rail assembly. *** Cautions and Warnings *** Before attempting to connect anything to the Switch or your computer(s), please ensure that all your computer equipment and devices are powered off. Belkin Corp
Inhaltszusammenfassung zur Seite Nr. 13
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 11 INSTALLATION 6. Repeat steps 1 through 5 for each additional computer you wish to connect. Connect the Console 1. Set BANK address (The BANK address is preset to zero at the factory). 2. Connect the monitor to the Switch. Attach your monitor cable to the HDDB15 female port on the back of the Switch labeled “Console”. NOTE: 2x16 model shown 3. Connect the PS/2 or USB keyboard to the appropriate port on the back of the Switch in the “Console” sec
Inhaltszusammenfassung zur Seite Nr. 14
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 12 INSTALLATION Connecting Multiple Switches (Daisy-Chaining) You can daisy-chain up to 16 Switches and Expanders together; this will give a server administrator control over a maximum of 256 computers. In addition, when a second Switch is daisy-chained, additional consoles can be added, creating a configuration of up to four consoles. Each daisy-chained group of Switches becomes a unit that is referred to as a “BANK” and assigned an address. The S
Inhaltszusammenfassung zur Seite Nr. 15
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 13 INSTALLATION DIP Switch Configuration Chart DIP SWITCH # BANK ADDRESS 12 3 4 BANK 00 (Default) DOWN DOWN DOWN DOWN UP DOWN DOWN DOWN BANK 01 PRIMARY/SECONDARY DOWN UP DOWN DOWN BANK 02 SECONDARY UP UP DOWN DOWN BANK 03 SECONDARY DOWN DOWN UP DOWN BANK 04 SECONDARY UP DOWN UP DOWN BANK 05 SECONDARY DOWN UP UP DOWN BANK 06 SECONDARY UP UP UP DOWN BANK 07 SECONDARY DOWN DOWN DOWN UP BANK 08 SECONDARY UP DOWN DOWN UP BANK 09 SECONDARY DOWN UP DOWN
Inhaltszusammenfassung zur Seite Nr. 16
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 14 INSTALLATION 3. Connect the console monitor, keyboard, and mouse to the console ports of the primary Switch(es), as previously described for standalone units, skipping steps 5 and 6. Note: Dual-console support available on 2x16 model only. 4. Connect the computers to the Switch as previously described for standalone Switches. F1DE101A-AP F1DE101A-AP 14
Inhaltszusammenfassung zur Seite Nr. 17
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 15 INSTALLATION Connecting the Daisy-Chain Cable: 5. Begin with BANK 00. Using the Daisy-Chain Cable (F1D9402-XX), connect one end to the “Daisy-Chain OUT” port on the first Switch. 6. Connect the other end of the Daisy-Chain Cable to the “Daisy-Chain IN” port of the next Switch. Note: It does not matter which unit is the primary unit, only that they are connected OUT-to-IN or IN-to-OUT. Adding Additional Units: 7. Continuing in the same manner, u
Inhaltszusammenfassung zur Seite Nr. 18
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 16 INSTALLATION 9. If the primary BANK is set to address 00, the KVM administrator must configure the Switch for daisy-chain usage. To do this, take the following steps: (Note: You may see lines across some of the consoles, which is normal since it is in an invalid configuration until the “Daisy-Chain this Switch” option is activated). a) Open the OSD by pressing the CTRL key twice, then the space bar, and enter Setup. b) Go to the Options page, s
Inhaltszusammenfassung zur Seite Nr. 19
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 17 USING YOUR SWITCH Now that you have connected your consoles and computers to your Switch, it is ready for use. You can select connected computers by the direct-access port selectors, located on the front panel of the Switch, hot key commands, or the On-Screen Display. Selecting a Computer Using Direct-Access Port Selectors The Switch has been designed to allow a 1x16 KVM Switch to access all of the ports on a 2x16 KVM Switch or KVM Expander (F1
Inhaltszusammenfassung zur Seite Nr. 20
P74342_F1DWXXXC_man.qxd 12/5/03 3:14 PM Page 18 USING YOUR SWITCH Daisy-Chain Configuration • The 7-segment display of a secondary Switch will always display its BANK address. All other buttons and LEDs on secondary BANKs will be disabled. Static Mode (Idle) • The 7-segment LEDs will display the current BANK ID. • The Port Selection and Shift LEDs will be off. • The Console LED will be lit, indicating that this Switch is a console. The Switch will go into Select Mode when you press and releas
