Inhaltszusammenfassung zur Seite Nr. 1
TigerSwitch 10/100
8-Port Fast Ethernet Switch
◆ 8 10BASE-T/100BASE-TX ports, 1 1000BASE-T port
◆ Optional 100BASE-FX or 1000BASE-X modules
◆ 5.6 Gbps aggregate bandwidth
◆ Spanning Tree Protocol
◆ Up to four port trunks (static or dynamic)
◆ Port mirroring for non-intrusive analysis
◆ QoS support with two priority queues
◆ Full support for VLANs with GVRP
◆ IP multicasting with IGMP snooping
◆ Security filtering based on MAC addresses
◆ Manageable via console, Web, SNMP/RMON
Management Guide
SM
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
TigerSwitch 10/100 Management Guide From SMC’s Tiger line of feature-rich workgroup LAN solutions 38 Tesla Irvine, CA 92618 May 2003 Pub. # ? Phone: (949) 679-8000
Inhaltszusammenfassung zur Seite Nr. 4
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2003 by 38 Tesla Irvine, CA 92618 All rights reserved. Printed in T
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Description of Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 System Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 2 Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Connec
Inhaltszusammenfassung zur Seite Nr. 6
CONTENTS Configuring Dynamic Trunks . . . . . . . . . . . . . . . . . . . . . . . . . . 3-16 Aggregator Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17 Aggregator Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 State Activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20 Forwarding and Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21 Configuring Multicast Filtering . . . .
Inhaltszusammenfassung zur Seite Nr. 7
CONTENTS Status and Counters Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Displaying Connection Status . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Showing Port Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Displaying System Information . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9 Switch Static Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Administration Configurat
Inhaltszusammenfassung zur Seite Nr. 8
CONTENTS Link Access Control Protocol Menu . . . . . . . . . . . . . . . . . . . . . 4-47 Configuring the Aggregator Setting . . . . . . . . . . . . . . . . . . 4-48 Setting the State Activity . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-49 Displaying Aggregator Information . . . . . . . . . . . . . . . . . . 4-50 Reboot Switch Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52 Set Logout Timer Menu . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 9
CHAPTER 1 INTRODUCTION This switch provides a broad range of features for Layer 2 switching. It includes a management agent that allows you to configure the features listed in this manual. The default configuration can be used for most of the features provided by this switch. However, there are many options that you should configure to maximize the switch’s performance for your particular network environment. Key Features Feature Description Authentication Console, Telnet, Web – User name
Inhaltszusammenfassung zur Seite Nr. 10
INTRODUCTION Description of Software Features IEEE 802.1D Bridge – The switch supports IEEE 802.1D transparent bridging. The address table facilitates data switching by learning addresses, and then filtering or forwarding traffic based on this information. The address table supports up to 6K addresses. Store-and-Forward Switching – The switch copies each frame into its memory before forwarding them to another port. This ensures that all frames are a standard Ethernet size and have been ver
Inhaltszusammenfassung zur Seite Nr. 11
DESCRIPTION OF SOFTWARE FEATURES • Simplify network management for node changes/moves by remotely configuring VLAN membership for any port, rather than having to manually change the network connection. • Provide data security by restricting all traffic to the originating VLAN. Port Mirroring – The switch can unobtrusively mirror traffic from any port to a monitor port. You can then attach a protocol analyzer or RMON probe to this port to perform traffic analysis and verify connection integr
Inhaltszusammenfassung zur Seite Nr. 12
INTRODUCTION Multicast Filtering – Specific multicast traffic can be assigned to its own VLAN to ensure that it does not interfere with normal network traffic and to guarantee real-time delivery by setting the required priority level for the designated VLAN. The switch uses IGMP Snooping and Query to manage multicast group registration. System Defaults The following table lists some of the basic system defaults. Function Parameter Default IP Settings IP Address 0.0.0.0 Subnet Mask 0.0.0.0 De
Inhaltszusammenfassung zur Seite Nr. 13
SYSTEM DEFAULTS Function Parameter Default Spanning Tree Status Enabled Protocol (Defaults: All values based on IEEE 802.1D) Address Table Aging Time 300 seconds Forwarding and Filtering Static addresses: none Filter addresses: none Multicast IGMP Snooping Disabled Filtering IGMP Query Auto-negotiation Virtual LANs VLAN Status Disabled Default VLAN 1 PVID 1 Ingress Filtering (Rule 1) Enabled - Tag must match PVID Ingress Filtering (Rule 2) All - Acceptable frame types GVRP Disabled Class of Ser
Inhaltszusammenfassung zur Seite Nr. 14
INTRODUCTION 1-6
Inhaltszusammenfassung zur Seite Nr. 15
CHAPTER 2 INITIAL CONFIGURATION Connecting to the Switch Configuration Options The switch includes a built-in network management agent. The agent offers a variety of management options, including SNMP, RMON, and a Web-based interface. A PC may also be connected directly to the switch for configuration and monitoring via the console menu. Note: The IP address for this switch is unassigned by default. To change this address, see “Setting an IP Address” on page 2-5. The switch’s HTTP Web agent
Inhaltszusammenfassung zur Seite Nr. 16
INITIAL CONFIGURATION The switch’s console menu, Web Interface, and SNMP agent allow you to perform the following management functions: • Set user name and password • Set an IP interface for management access (console menu only) • Configure SNMP parameters • Enable/disable any Ethernet port • Set the speed/duplex mode for any port • Configure up to 255 IEEE 802.1Q VLANs • Enable GVRP automatic VLAN registration • Configure IGMP multicast filtering • Upload and download system firmware via T
Inhaltszusammenfassung zur Seite Nr. 17
CONNECTING TO THE SWITCH 2. Connect the other end of the cable to the RS-232 serial port on the switch. 3. Make sure the terminal emulation software is set as follows: • Select the appropriate serial port (COM port 1 or COM port 2). • Set the data rate to 9600 baud. • Set the data format to 8 data bits, 1 stop bit, and no parity. • Set flow control to none. • Set the emulation mode to VT100. Note: Once you have set up the terminal correctly, the console login screen will be displayed. Re
Inhaltszusammenfassung zur Seite Nr. 18
INITIAL CONFIGURATION Basic Configuration Console Connection Access to the console menu is controlled by a user name and password. The default setting is “admin” for both the user name and password. To log into the console menu, perform these steps: 1. Enter “admin” at the user name prompt. 2. Enter “admin” at the password prompt. (The password characters are not displayed on the console screen.) The session is opened and the Main Menu displays. Setting Passwords Note: If this is your first
Inhaltszusammenfassung zur Seite Nr. 19
BASIC CONFIGURATION 4. Select “Change Password” and press . • Type the old password and press . • Type the new password and press . • Then re-enter the new password for verification, press . Setting an IP Address You must establish IP address information for the switch to obtain management access through the network. You can manually assign an IP address to the switch. You may also need to specify a default gateway that resides between this device and management st
Inhaltszusammenfassung zur Seite Nr. 20
INITIAL CONFIGURATION To assign an IP address to the switch, complete the following steps: 1. Navigate from the Main Menu to – Switch Static Configuration, Administration Configuration, and then IP Configuration. 2. Select , type in the IP Address, Subnet Mask, and Gateway. Press after each item. Press to return to the action bar at the bottom of the screen. Select and press any key to continue. (The IP addresses shown below are merely examples.) TigerSwitch 1
