Inhaltszusammenfassung zur Seite Nr. 1
TigerSwitch 1000
Gigabit Ethernet Switch
6 auto-MDIX 10/100/1000BASE-T ports
Two slots for hot-swappable 1000BASE-X GBIC modules
16 Gbps of aggregate switch bandwidth
Support for redundant power unit
Up to four port trunks per switch
Port mirroring for non-intrusive analysis
QoS support for two-level priority
Full support for IEEE 802.1Q VLANs
IGMP multicast filtering and snooping
Manageable via console, Web, SNMP/RMON
Installation Guide
SMC8606T
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
TigerSwitch 1000 Installation Guide From SMC’s Tiger line of feature-rich workgroup LAN solutions 6 Hughes Irvine, CA 92618 October 2001 Phone: (949) 707-2400 Pub. #150200001800A R02
Inhaltszusammenfassung zur Seite Nr. 4
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. Copyright © 2001 by SMC Networks, Inc. 6 Hughes Irvine, CA 92618 All rights
Inhaltszusammenfassung zur Seite Nr. 5
LIMITED WARRANTY Limited Warranty Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, durin
Inhaltszusammenfassung zur Seite Nr. 6
LIMITED WARRANTY IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S
Inhaltszusammenfassung zur Seite Nr. 7
COMPLIANCES FCC - Class A This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equi
Inhaltszusammenfassung zur Seite Nr. 8
COMPLIANCES EC Conformance Declaration - Class A SMC contact for these products in Europe is: SMC Networks Europe, Edificio Conata II, o a Calle Fructuós Gelabert 6-8, 2 , 4 , 08970 - Sant Joan Despí, Barcelona, Spain. This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and
Inhaltszusammenfassung zur Seite Nr. 9
COMPLIANCES Taiwan BSMI Class A Australia AS/NZS 3548 (1995) - Class A SMC contact for products in Australia is: SMC Communications Pty. Ltd. Suite 18, 12 Tryon Road, Lindfield NSW2070, Phone: 61-2-94160437 Fax: 61-2-94160474 iii
Inhaltszusammenfassung zur Seite Nr. 10
COMPLIANCES Safety Compliance Warning: Fiber Optic Port Safety When using a fiber optic port, never look at the transmit laser while it is powered on. Also, never look directly at the fiber TX port and fiber cable ends when they are powered on. Avertissment: Ports pour fibres optiques - sécurité sur le plan optique Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez jamais directement le port TX (Transmission) à fibres optiques et les embouts de câbles à fibres optiques tan
Inhaltszusammenfassung zur Seite Nr. 11
COMPLIANCES Wichtige Sicherheitshinweise (Germany) 1. Bitte lesen Sie diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung. 4. Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vor Feuchtigkeit zu schützen. 6. Bei der Aufstellung de
Inhaltszusammenfassung zur Seite Nr. 12
COMPLIANCES vi
Inhaltszusammenfassung zur Seite Nr. 13
TABLE OF CONTENTS Index 7 1 About the TigerSwitch 1000 1-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Description of Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1000BASE-T Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 GBIC Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Network Managemen
Inhaltszusammenfassung zur Seite Nr. 14
TABLE OF CONTENTS Optional Rack-Mounting Equipment . . . . . . . . . . . . . . . 3-2 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Desktop or Shelf Mounting . . . . . . . . . . . . . . . . . . . . . 3-5 Installing a GBIC Transceiver . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Connecting to a Power Source . . . . . . . . . . . . . . . . . . . . . . . 3-7 4 Making
Inhaltszusammenfassung zur Seite Nr. 15
TABLE OF CONTENTS Switch Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-2 Management Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-3 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-3 Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4 D Ordering Information D-1 Glossary
Inhaltszusammenfassung zur Seite Nr. 16
TABLE OF CONTENTS x
Inhaltszusammenfassung zur Seite Nr. 17
CHAPTER 1 ABOUT THE TIGERSWITCH 1000 Overview The TigerSwitch 1000 is a high-performance Gigabit Ethernet switch designed for the network core. It provides eight 1000 Mbps ports that can significantly improve the performance of your network’s backbone, and deliver the throughput needed to support a broad range of advanced network applications. With 16 Gigabits of aggregate bandwidth, the TigerSwitch 1000 can provide the quickest solution to meeting the growing demands on your networkís lim
Inhaltszusammenfassung zur Seite Nr. 18
ABOUT THE TIGERSWITCH 1000 Figure 1-1. Front and Rear Panels Description of Hardware 1000BASE-T Ports These ports are RJ-45 ports that operate at 10 Mbps, 100 Mbps and 1000 Mbps, full and half duplex. The ports can be connected to other IEEE 802.3ab 1000BASE-T compliant devices up to 100 m (328 ft.) away using Category 5 twisted-pair cable. Each port also supports the IEEE 802.3x auto-negotiation of flow control, so the switch can automatically prevent port buffers becoming saturated. GB
Inhaltszusammenfassung zur Seite Nr. 19
ABOUT THE TIGERSWITCH 1000 Status LEDs The LEDs, which are located on the front panel for easy viewing, are shown below and described in the following table. Figure 1-2. Port and System LEDs Port and System Status LEDs LED Condition Status Power On Green Switch is receiving power. Off Power off or failure. RPU On Green Redundant power unit is attached and is operating in a load-sharing mode. Off Power off or failure. Diag. Flashing Green System self-diagnostic test in progress. On Green Syst
Inhaltszusammenfassung zur Seite Nr. 20
ABOUT THE TIGERSWITCH 1000 Port and System Status LEDs LED Condition Status RJ-45 Ports Link Flashing Green Port is operating at 1000 Mbps. On Green Port is operating at 100 Mbps. On Amber Port is operating at 10 Mbps. Flashing Amber Port has been manually disabled. Off There is no valid link on the port. ACT On Green Traffic is passing through the port. FDX On Green Port is operating at full duplex. On Amber Port is operating in half-duplex mode. Network Management Agent The TigerSwitch 1000 in
