Inhaltszusammenfassung zur Seite Nr. 1
Reference Guide
Fibre Channel Event Message
QLogic 3000/5000/9000 Series Fibre Channel Switch
QLogic Intelligent Pass-thru Module for IBM BladeCenter
QLogic 20-Port SAN Switch Module for IBM BladeCenter
QLogic Virtual Fabric Extension Module for IBM BladeCenter
Firmware Version 7.x, 8.x, 9.x
59060-07 D
Inhaltszusammenfassung zur Seite Nr. 2
Reference Guide Fibre Channel Event Message QLogic 3000/5000/9000 Series Fibre Channel Switch Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these p
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Preface Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Related Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Training . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Reference Guide Fibre Channel Event Message QLogic 3000/5000/9000 Series Fibre Channel Switch iv 59060-07 D
Inhaltszusammenfassung zur Seite Nr. 5
Preface This manual describes the alarm messages for QLogic Fibre Channel switches. This manual is organized as follows: This preface describes the intended audience, related materials, and technical support. Section 1 describes event logging concepts, including definitions of severity levels, how to configure the event log, how to display the event log, and how to download the event log from the switch. Section 2 describes the message format and lists the messages. Intended Audience T
Inhaltszusammenfassung zur Seite Nr. 6
Preface Documentation Conventions Text in blue font indicates a hyperlink (jump) to a figure, table, or section in this guide, and links to Web sites are shown in underlined blue. For example: Table 9-2 lists problems related to the user interface and remote agent. See “Installation Checklist” on page 3-6. For more information, visit www.qlogic.com. Text in bold font indicates user interface elements such as a menu items, buttons, check boxes, or column headings. For example: Clic
Inhaltszusammenfassung zur Seite Nr. 7
Preface Technical Support Technical Support Customers should contact their authorized maintenance provider for technical support of their QLogic products. QLogic-direct customers may contact QLogic Technical Support; others will be redirected to their authorized maintenance provider. Visit the QLogic support Web site listed in Contact Information for the latest firmware and software updates. For details about available service plans, or for information about renewing and extending your serv
Inhaltszusammenfassung zur Seite Nr. 8
Preface Technical Support Knowledge Base The QLogic knowledge base is an extensive collection of QLogic product information that you can search for specific solutions. We are constantly adding to the collection of information in our knowledge base to provide answers to your most urgent questions. Access the knowledge base from the QLogic Support Center: http://support.qlogic.com. viii 59060-07 D
Inhaltszusammenfassung zur Seite Nr. 9
1 Events and Event Logging Messages originate from the switch, from Enterprise Fabric Suite, or from the QuickTools web applet in response to events that occur in the fabric. This chapter describes the following topics: Understanding Severity Levels Displaying Events using the Event Browser Displaying the Events Using the Command Line Interface Configuring the Event Log Archiving and Downloading the Event Log Configuring Port Alarm Thresholds Understanding Severity Levels Events ar
Inhaltszusammenfassung zur Seite Nr. 10
1–Events and Event Logging Displaying Events using the Event Browser Displaying Events using the Event Browser Both Enterprise Fabric Suite and QuickTools have an event browser that displays a list of events generated by the switches in the fabric and by the applications themselves. Event browser messages are permanently discarded when you close an Enterprise Fabric Suite or QuickTools session; however, you can save these events to a file on the workstation before you close the session and r
Inhaltszusammenfassung zur Seite Nr. 11
1–Events and Event Logging Displaying the Events Using the Command Line Interface In the CLI, each message has the following format: [ordinal][time_stamp][severity][source][message_ID][message_text] Table 1-2. Event Log Message Format Component Description [ordinal] A number assigned to each message in sequence since that last time the alarm history was cleared. [time_stamp] The time the alarm was issued in the format day-month-hh:mm:ss:ms-yyyy. This time stamp comes from the switch for even
Inhaltszusammenfassung zur Seite Nr. 12
1–Events and Event Logging Configuring the Event Log Configuring the Event Log You can customize what events are recorded in the switch event log using the Set Log command. With the Set Log command, you can filter the events to be recorded by component, specific ports, and severity level. You can choose from the following component events: E_Port events Management server events Name server events Port events Switch management events Simple Network Management Protocol (SNMP) events
Inhaltszusammenfassung zur Seite Nr. 13
1–Events and Event Logging Configuring Port Alarm Thresholds Configuring Port Alarm Thresholds You can configure the switch to generate alarms for selected events. Configuring an alarm involves choosing an event type, rising and falling triggers, a sample window, and finally enabling or disabling the alarm. You can configure port alarm thresholds for the following port events using Enterprise Fabric Suite or the CLI: Cyclic Redundancy Check (CRC) errors Decode errors Inter-switch Link (
Inhaltszusammenfassung zur Seite Nr. 14
1–Events and Event Logging Configuring Port Alarm Thresholds 1-6 59060-07 D
Inhaltszusammenfassung zur Seite Nr. 15
2 Event Messages This section lists event messages from the command line interface and Enterprise Fabric Suite in message ID sequence by the following severity levels: Fault Events Alarm Events Critical Events Warning Events Informative Events You can look up a message by its message ID or by searching for the message text. If the message you are looking for does not appear in this section, contact your authorized maintenance provider. Fault Events The following fault messages apply
Inhaltszusammenfassung zur Seite Nr. 16
2–Event Messages Fault Events FAN1_MISSING Meaning: FAN1 is not installed. FW_APP_FAIL Meaning: Internal application failure. FW_APP_PEER_FAULT Meaning: Application declared an error communicating with other CPU. FW_APP_SELF_FAULT Meaning: Application declared an internal fault. FW_APP_STARTUP_FAIL Meaning: Application is unable to complete startup processing. FW_FILE_SYSTEM_REMADE Meaning: A Remake Filesystem command was performed in maintenance mode. FW_FT_APP_REG_FAIL Meaning: Application is
Inhaltszusammenfassung zur Seite Nr. 17
2–Event Messages Fault Events HW_BAD_SEATING Meaning: Blade is improperly seated. HW_MP_ACCESS_CPU0 Meaning: The maintenance panel SPROM data accessed through CPU0 is either inaccessible or invalid. HW_MP_ACCESS_CPU1 Meaning: The maintenance panel SPROM data accessed through CPU1 is either inaccessible or invalid. HW_MP_DATA_MISMATCH Meaning: The maintenance panel SPROMs accessed through CPU0 and CPU1 are not identical. HW_POWERUP_FAIL Meaning: Blade never established initial communications.
Inhaltszusammenfassung zur Seite Nr. 18
2–Event Messages Alarm Events Alarm Events An alarm event requires action before you can proceed any further. The following lists each alarm event ID numbers and message displayed, and provides a description of the meaning of the message and recommended action to take. (A1000.000F) (The switch is canceling the hotreset - try again later) Meaning: You cannot move forward with the hot reset. All applications and switch resources are backing out of the procedure and returning to normal operatio
Inhaltszusammenfassung zur Seite Nr. 19
2–Event Messages Alarm Events (A1003.0010) (Segmenting, zoneset zone_set_name not defined) Meaning: In non-interop mode, there is a conflict in the zoning configuration, causing the Inter-Switch Link (ISL) to isolate. The zone set is not found within the local zoning data base while interop mode is disabled. Action: Contact your authorized maintenance provider. (A1003.0011) (Segmenting, zoneset zone_set_name already active) Meaning: In non-interop mode, there is a conflict in the zoning confi
Inhaltszusammenfassung zur Seite Nr. 20
2–Event Messages Alarm Events (A1003.0016) (Releasing Lock held too long by domain_ID) Meaning: A zone merge could not be completed in the acceptable time. Action: Check the status of the switch given by domain_ID. (A1003.0017) (Activation of zoneset by management server failed due to port port_number out of range.) Meaning: A zone member defined by domain ID and port was received within a management server AZSD command with a port number out of range. Action: Check the management server app
