Inhaltszusammenfassung zur Seite Nr. 1
RKP21x-208KVM Series
RKP241x-208KVM Series
USER’S MANUAL
WHERE TO BUY
http://www.rackmountnet.com
1933 O'Toole Ave, #A107
San Jose, CA 95131, USA
Toll Free Tel: (866)955-0598
email: sales@rackmountnet.com
Inhaltszusammenfassung zur Seite Nr. 2
Introduction Thank you for purchasing RKP215-208KVM Rackmount LCD Keyboard Drawer with 8 ports KVM switch. LCD Keyboard Drawer with 8 ports KVM switch is ideal for application where space is critical. RKP215-208KVM is a combination of keyboard, trackball, KVM switch and TFT LCD packed into a drawer with features such as monitor flip up design, adjustable mounting brackets, built in LCD OSD, centralized control of 8 PCs. Features • Unique mechanical design to maximize rack mountab
Inhaltszusammenfassung zur Seite Nr. 3
Packing Contents RKP215-208KVM LCD Keyboard Drawer with KVM switch 1 PCS User’s manual 1 PCS AC to DC Power Adapter w/power cord 1 PCS Rack Mount Kit 1 SET Standard 3-in-1 KVM cable 8 PCS Before Unpacking It is very important to locate the LCD Keyboard Drawer with KVM switch in a suitable environment. The surface for placing and fixing the LCD Keyboard Drawer with KVM switch should be stable and level or mounted into a suitable cabinet. Make sure the place has good ventilation
Inhaltszusammenfassung zur Seite Nr. 4
Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. Unplug the LCD Keyboard Drawer with KVM switch from the power outlet before cleaning. Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen slightly with it. Do not expose the LCD Keyboard Drawer with KVM switch directly to rain, water, mois
Inhaltszusammenfassung zur Seite Nr. 5
LCD Session Rev. JUL-02
Inhaltszusammenfassung zur Seite Nr. 6
On Screen Display - OSD OSD is the convenient way for a user to adjust the screen performance to his satisfaction. Menu / Selection Left Right 1. Entering the OSD Meun 2. Press the to display the OSD main menu. 3. Selecting icons for adjusting 4. Use buttons to scroll through the icons within the main menu and other sub-menus the currently selected icon will be highlighted. 5. A slider bar is displayed whenever a value is to be sent. Use
Inhaltszusammenfassung zur Seite Nr. 7
8. Select “Auto” for autoadjust LCD quality Rev. JUL-02
Inhaltszusammenfassung zur Seite Nr. 8
Customizing the Settings 1. Brightness • To perform brightness adjustment of the input RGB signal 2. Contrast • To adjust the contrast level of the input signal 3. Phase • To optimize the picture quality by adjusting the sampling clock of the input RGB Signal 4. Frequency • To adjust the frequency of the input signal to optimize the picture quality 5. H - Position • To adjust the horizontal position of the frame 6. V - Position • To adjust the vertical position of the frame 7.
Inhaltszusammenfassung zur Seite Nr. 9
1. H - Position • To adjust the horizontal position of the OSD frame 2. V - Position • To adjust the vertical position of the OSD frame 3. Half Tone • To switch the OSD color from full color to half tone 4. OSD Timeout • To modify the duration of the OSD time-out 1. Information • To display the existing input signal information 2. Reset • To reset the LCD to factory setting Rev. JUL-02
Inhaltszusammenfassung zur Seite Nr. 10
3. Half Tone • To switch LCD power ON/OFF auto mode Resolution Setting Step 1 – Press right click on the desktop Step 2 – Choose “Properties” Step 3 – change the “Screen Resolution” Step 4 – change the “Screen refresh rate” Rev. JUL-02
Inhaltszusammenfassung zur Seite Nr. 11
FAQ My display doesn’t work, even though the computer appears to work 1. Make sure the power cable is securely plugged into the display 2. Make sure the display is turned on 3. Try turning the display off and then turning it on again 4. Make sure the display’s power cord is plugged into a power outlet and into the AC power adapter. Check to see whether the outlet works by plugging another device into the outlet 5. Check the connection between the display and the
Inhaltszusammenfassung zur Seite Nr. 12
FAQ – Sun Server Sun Server are using resolution at 1152 x 900 x 76Hz Supported resolution mode 640 x 480 x 70/75Hz 800 x 600 x 70/75Hz 1024 x 768 x 70/75Hz 1280 x 1024 x 75Hz (17” LCD) Note the Max. frequency of 13.3” is 70Hz You need to change the Sun Server resolution before you connect to LCD Display Please do the following procedure to change the resolution setting : 1. as root: you may find the following comment “/user/sbin/m64config” 2. Typ
Inhaltszusammenfassung zur Seite Nr. 13
Technical Information LCD Size 17” Screen Type TFT Active Matrix Display Area 337.92mm(H) x 270.336mm(V) Contrast Ratio 350 : 1 Viewing Angle 150 (H) x 125 (V) Typ. Resolution XGA 1280 x 1024 Pixel pitch 0.264mm (H) x 0.264mm (W) Response Time Tr=5ms, Tf=20ms Typ Brightness 250 cd/m2 Panel Color 16.7M Colors Back Light 4 Lamps Video Synchronization Horizontal : 31-69 KHz Range Vertical : 56-75 Hz Input Signal Analog RGB 0.7Vp-p Power Management
Inhaltszusammenfassung zur Seite Nr. 14
KVM Session Rev. JUL-02
Inhaltszusammenfassung zur Seite Nr. 15
KVM Bank Button Channel Button PS/2 Cable: Mini Din 6 pin Male to Male VGA Cable: HDB15 pin Male to Male Installation Before installation, please make sure all of peripherals and computers have been turned off. 1. Connect the Keyboard, VGA, Mouse cables to the computer ports of KVM switch 2. After Powering on computers and finishing the boot-up process, you can start to go KVM switch. Note: Please don’t switch the PC port (i.e. Don’t press the push button of
Inhaltszusammenfassung zur Seite Nr. 16
Startup 1. Power on the KVM power 2. 7 segments LED is on 3. Key-in the password, default is “00000000” 4. If you forget your password, please send back to Manufacturer / Distributor 5. Pressing to view all port 1 2 3 4 8 7 6 5 LED Indication When you change the channel If the PC is turn off or is disconnected The LED will flash otherwise is will lit Keyboard hot key command Simple key sequence Pre
Inhaltszusammenfassung zur Seite Nr. 17
Hot Key Press “Bank” & “Channel” at the same time to reset the KVM switch to default setting • S.L. + S.L. + Previous Channel • S.L. + S.L. + Next Channel Note: You also could press “up arrow key” or “down arrow key” longer time to speed up selecting the destination port • S.L. + S.L. + Page Up Previous Bank • S.L. + S.L. + Page Down Next Bank To Select PC port • S.L. + S.L. + Bank No. + Port No. • Bank No. 1 – 8 (Max.) Port No. 01 – 16 (Max.) • Example we select
Inhaltszusammenfassung zur Seite Nr. 18
Rev. JUL-02
Inhaltszusammenfassung zur Seite Nr. 19
OSD Menu Bank No. BANK : 1 01 SYSTEM 01 02 SYSTEM 02 03 SYSTEM 03 04 SYSTEM 04 PC Name List 05 SYSTEM 05 06 SYSTEM 06 07 SYSTEM 07 08 SYSTEM 08 OSD : 1 0 SEC. CHANGE PASSWORD SCAN: 1 0 SEC. CONSOLE ON/OFF KVM Settings ESC : QUIT ENTER :COMPLETE TAB : NEXT INSERT :EDIT Info. / : SELECT PORT PgDn/PgUp: BANK SELECT Use “Tab” key to select items like Bank, OSD, SCAN, CHANGE PASSWORD, CONSOLE ON/
Inhaltszusammenfassung zur Seite Nr. 20
OSD Menu • PC Name List • “ ” near to the PC name represents the PC system is powered on BANK : 1 • Use up arrow key “ ” or down arrow key “ ” to select port for destination PC 01 SYSTEM 01 02 SYSTEM 02 name and press “Enter” to select 03 SYSTEM 03 04 SYSTEM 04 • Edit PC name • Press “Ins” key for editing PC name 05 SYSTEM 05 06 SYSTEM 06 • PC name should not more than 8 07 SYSTEM 07 08 SYSTEM 08 characters • After finish e
