Inhaltszusammenfassung zur Seite Nr. 1
1275 Danner Dr Tel:330-562-7070
R NETWORK
TECHNOLOGIES Aurora, OH 44202 Fax:330-562-1999
INCORPORATED www.nti1.com
NTI
TM
VOPEX Series
VOPEX-USBV-2
USB Keyboard, Video, and Mouse
Splitter/Hub
Installation and Operation Manual
MAN034 Rev Date 10/7/2004
Inhaltszusammenfassung zur Seite Nr. 2
Warranty Information The warranty period on this product (parts and labor) is one (1) year from the date of purchase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.nti1.com for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns. COPYRIGHT Copyright © 2004 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, s
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS INTRODUCTION.............................................................................................................................................................1 LIMITATIONS..................................................................................................................................................................1 MATERIALS ..............................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
NTI BRANDNAME AND DESCRIPTON INTRODUCTION The VOPEX-USBV-2-HUB (VOPEX) is a USB KVM Splitter and 3-Port Hub. It enables the control of one USB enabled CPU through two separate USB keyboards, USB mice, and VGA monitors and it enables the connection of 3 additional USB devices (other than keyboards or mice). Each user is able to have complete control of a CPU, provided they don't try to access it at the same time. While the user access is controlled by four (4) separate modes of operation, bot
Inhaltszusammenfassung zur Seite Nr. 5
NTI BRANDNAME AND DESCRIPTON Rear View of VOPEX-USBV-2 Front View of VOPEX-USBV-2 5 6 4 3 1 MONITOR 1 VIDEO MONITOR 2 R NTI VOPEX NTI 1275 Danner Dr Network Technologies Inc Aurora, OH 44202 www.nti1.com 2 Tel:330-562-7070 Fax:330-562-1999 USER 2 USER 1 Mode U1 U2 Pwr DEVICES DEVICES 5VDC 2A HUB PORTS CPU - + DEVICE 3 DEVICE 2 DEVICE 1 7 10 9 8 FEATURES AND FUNCTIONS 1. Power Switch- to power up or power down the VOPEX-USBV-2. 2. Power LED- for visual indication of splitter's power status 3
Inhaltszusammenfassung zur Seite Nr. 6
NTI BRANDNAME AND DESCRIPTON INSTALLATION FYI: It is not necessary to disconnect power to the CPU and monitor(s) before installation. Monitor Connection 1. Disconnect the monitor cable at the CPU and reconnect it to the "MONITOR 1" port on the VOPEX. (See Fig. 1) 2. Plug a second monitor (or optional VEXT-xx extension cable) into the "MONITOR 2" port on the VOPEX. Note: "xx" in VEXT-xx indicates the length of the cable in feet. Many lengths are available. Contact your VPI salesperson or vis
Inhaltszusammenfassung zur Seite Nr. 7
NTI BRANDNAME AND DESCRIPTON CPU Connection 1. Connect the male USB type A connector end of the USB-AB-1M-ST cable into the device port on the CPU. 2. Connect the male USB type B connector of the same cable to the "CPU" port on the VOPEX. 3. Connect the male 15HD connector end of the VEXT-3 into the CPU’s video port. (See Fig. 2) 4. Connect the female 15HD connector end of the VEXT-3 into the "VIDEO" port on the VOPEX. Rear View of VOPEX-USBV-2 VIDEO MONITOR 2 MONITOR 1 VIDEO NTI 1275 Danner D
Inhaltszusammenfassung zur Seite Nr. 8
NTI BRANDNAME AND DESCRIPTON OPERATION Mode Selection The VOPEX comes equipped with four (4) modes of operation. To manually toggle between modes, depress the MODE button once each time a mode change is desired. The VOPEX will cycle through the 4 modes of operation, then return to the first mode (1 to 2, 2 to 3, 3 to 4, 4 to 1). The following table depicts the 4 operations available for operation. MODE DESCRIPTION INDICATOR LEDS 1- INSTANTANEOUS Same as "DELAY" mode except that the delay is U
Inhaltszusammenfassung zur Seite Nr. 9
NTI BRANDNAME AND DESCRIPTON Mice and Trackballs with MACs The VOPEX can be configured to enable full functionality between mice and trackballs having two or more buttons and a USB MAC CPU. By default, the CPU port on the VOPEX is configured for use a WINDOWS or SUN CPU and has no special translation for using multi-function mice and trackballs when a MAC CPU is connected. Using the commands in Command Mode above, either enable or disable this feature as needed. NOTE: Be sure to re-configu
Inhaltszusammenfassung zur Seite Nr. 10
NTI BRANDNAME AND DESCRIPTON SPECIFICATIONS Size: Each unit is 8.5”W x 6”D x 2.6”H Power: Powered by 120 or 240VAC @ 50 or 60Hz-5VDC/2.0A AC Adapter Connections: 15HD VGA & SGA compatible USB Type A female device connectors USB Type B female CPU connector TROUBLESHOOTING PROBLEM SOLUTION • Keyboard error • Check cable connections on CPU and VOPEX • Mouse not working • Check cable connections on CPU and VOPEX • Monochrome on VIDEO OUT 1 po
