Inhaltszusammenfassung zur Seite Nr. 1
GS716T/GS724T
Hardware Installation
Guide
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, California 95134 USA
202-10510-02
January 2011
v1.0
Inhaltszusammenfassung zur Seite Nr. 2
© 2007, 2008, 2009 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR, the NETGEAR logo, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Portions of this document are copyright Intoto, Inc. Statement of Conditions In the interest of improving internal design, operational function
Inhaltszusammenfassung zur Seite Nr. 3
Contents GS716T/GS724T Hardware Installation Guide About This Manual Conventions, Formats and Scope ..................................................................................... v Revision History ................................................................................................................ vi Chapter 1 Introduction Overview .........................................................................................................................1-1 Features ............
Inhaltszusammenfassung zur Seite Nr. 4
GS716T/GS724T Hardware Installation Guide Step 3: Checking the Installation ..................................................................................4-15 Step 4: Connecting Devices to the Switch ....................................................................4-16 Step 5: Installing an SFP GBIC Module .......................................................................4-16 Step 6: Applying AC Power ...................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
About This Manual ® TM The NETGEAR ProSafe GS716T/GS724T Hardware Installation Guide describes how to install, configure and troubleshoot the Smart Switch. The information in this manual is intended for readers with intermediate computer and Internet skills. Conventions, Formats and Scope The conventions, formats, and scope of this manual are described in the following paragraphs: • Typographical Conventions. This manual uses the following typographical conventions: Italic Emphasis, books, CDs
Inhaltszusammenfassung zur Seite Nr. 6
GS716T/GS724T Hardware Installation Guide Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. • Scope. This manual is written for the Smart Switch according to these specifications: Product Version Smart Switch Manual Publication Date January 2011 Note: Product updates are available on the NETGEAR, Inc. website at http://kbserver.netgear.com/main.asp. Revision History Version Part Number Date Description Number 202-10510-02 1.0 January 2
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 Introduction Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR Smart Switch is a state-of-the-art, high-performance, IEEE-compliant network solution designed for users who require a large number of ports and want the power of Gigabit connectivity to eliminate bottlenecks, boost performance, and increase productivity. To simplify installation, the switch is shipped ready for use out of the box. This chapter serves as an introduction to the Smart Switch and pro
Inhaltszusammenfassung zur Seite Nr. 8
GS716T/GS724T Hardware Installation Guide Service (CoS) for traffic prioritization. These features provide better understanding and control of the network. Initial discovery of the switch on the network requires the Smart Control Center program, a utility that runs on a PC. The Smart Switch can be free-standing, or rack mounted in a wiring closet or equipment room. It is IEEE-compliant and offers low latency for high-speed networking. All ports can automatically negotiate to the highest spee
Inhaltszusammenfassung zur Seite Nr. 9
GS716T/GS724T Hardware Installation Guide • Automatic address learning function to build the packet-forwarding information table. The table contains up to 8K Media Access Control (MAC) addresses. • Full-duplex and half-duplex functions for all 10/100/1000 Mbps ports. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss/frame drops. • Half-duplex back-pressure control. • Per port
Inhaltszusammenfassung zur Seite Nr. 10
GS716T/GS724T Hardware Installation Guide Verify that the package contains the following: • NETGEAR Smart Switch • Rubber footpads for tabletop installation • Power cord • Rack-mount kit for installing the switch in a 19-inch rack • Installation guide • Smart Switch Resource CD with Smart Control Center and User’s manual If any item is missing or damaged, contact the place of purchase immediately. 1-4 Introduction v1.0, January 2011
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2 Physical Description This chapter describes the NETGEAR Smart Switch hardware features. Topics include: • GS716T Front and Back Panel Configuration • GS724T Front and Back Panel Configuration • LED Designations • Device Hardware Interfaces GS716T Front and Back Panel Configuration The GS716T is a 24-port 10/100/1000 Mbps + 2 SFP Combo ports Smart Switch. Every RJ-45 port is capable of sensing the line speed and negotiating the operation duplex mode with the link partner automatically
Inhaltszusammenfassung zur Seite Nr. 12
GS716T/GS724T Hardware Installation Guide • System LEDs Figure 2-2 illustrates the NETGEAR GS716T Smart Switch back panel: RS-232 Power Connector Figure 2-2 The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord. GS724T Front and Back Panel Configuration The GS724T is a 24-port 10/100/1000 Mbps Smart Switch + 2 SFP Combo ports switch. Every RJ-45 port is capable of sensing the line speed
Inhaltszusammenfassung zur Seite Nr. 13
GS716T/GS724T Hardware Installation Guide • System LEDs Figure 2-4 illustrates the NETGEAR GS724T Smart Switch back panel: RS-232 Power Connector Figure 2-4 The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord. LED Designations Port LEDs The following table describes the port LED designations. Table 2-1. Port LEDs Port LED Designation 16/24-10/100/1000 Mbps LINK/ACT • Solid Green - A v
Inhaltszusammenfassung zur Seite Nr. 14
GS716T/GS724T Hardware Installation Guide Table 2-1. Port LEDs (continued) Port LED Designation 2 SFP Ports - 1 LED per SFP LINK/ACT • Solid Green - A valid 1000 Mbps SFP port module link is established on the port. • Flashing Green - Packets transmission or reception is occurring on the port at 1000 Mbps. • Solid Yellow - A valid 100 Mbps SFP module link is established on the port. • Flashing Yellow - Packets transmission or reception is occurring on the port at 100 Mbps. • Off - No SPD l
Inhaltszusammenfassung zur Seite Nr. 15
GS716T/GS724T Hardware Installation Guide • Determines whether the link to the attached device requires a “normal” connection (such as when connecting the port to a PC) or an “uplink” connection (such as when connecting the port to a router, switch, or hub). • Configures the RJ-45 port to enable communications with the attached device, without requiring user intervention. In this way, the Auto Uplink technology compensates for setting uplink connections, while eliminating concern about wheth
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 3 Applications Your NETGEAR Smart Switch is designed to provide flexibility in configuring your network connections. It can be used as a stand-alone device or with 10 Mbps, 100 Mbps, and 1000 Mbps hubs and switches. Desktop Switching The NETGEAR Smart Switch can be used as a desktop switch to build a small network that enables users to have 1000 Mbps access to a file server. With full-duplex enabled, the switch port connected to the server or PC can provide 2000 Mbps throughput. Figu
Inhaltszusammenfassung zur Seite Nr. 17
GS716T/GS724T Hardware Installation Guide 3-12 Applications v1.0, January 2011
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 4 Installation This chapter describes the installation procedures for your NETGEAR Smart Switch. Switch installation involves the following steps: Step 1: Preparing the Site Step 2: Installing the Switch Step 3: Checking the Installation Step 4: Connecting Devices to the Switch Step 5: Installing an SFP GBIC Module Step 6: Applying AC Power Step 7: Managing the Switch using a Web Browser or the PC Utility Step 1: Preparing the Site Before you installing the switch, ensure the operating
Inhaltszusammenfassung zur Seite Nr. 19
GS716T/GS724T Hardware Installation Guide Table 4-1. Site Requirements (continued) Characteristics Requirements Power source Provide a power source within 6 feet (1.8 meters) of the installation location. Power specifications for the switch are shown in Appendix A . Ensure the AC outlet is not controlled by a wall switch, which can accidentally turn off power to the outlet and the switch. Environmental • Temperature - Install the switch in a dry area, with ambient temperature between 0 and 5
Inhaltszusammenfassung zur Seite Nr. 20
GS716T/GS724T Hardware Installation Guide 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. Figure 4-1 Step 3: Checking the Installation Before applying power perform the following: • Inspect the equipment thoroughly. • Verify that all cables are installed correctly. • Check cable routing to make sure cables are not damaged or creating a safety hazard. • Ensure all equipment is mounted properly and securely. Installation 4-15 v1.0, January 2011
