Inhaltszusammenfassung zur Seite Nr. 1
GS110TP Hardware
Installation Guide
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, California 95134 USA
202-10596-01
March 2010
v1.0
Inhaltszusammenfassung zur Seite Nr. 2
© 2010 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR, the NETGEAR logo, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Portions of this document are copyright Intoto, Inc. Statement of Conditions In the interest of improving internal design, operational function, and/or rel
Inhaltszusammenfassung zur Seite Nr. 3
Contents GS110TP Hardware Installation Guide About This Manual Conventions, Formats, and Scope .................................................................................... v How to Print this Manual ................................................................................................... vi Revision History ................................................................................................................ vi Chapter 1 Introduction Overview ......................
Inhaltszusammenfassung zur Seite Nr. 4
Chapter 4 Installation Step 1: Preparing the Site ..............................................................................................4-1 Step 2: Installing the Switch ...........................................................................................4-2 Installing the Switch on a Flat Surface .....................................................................4-2 Wall Mounting the Switch .......................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
About This Manual ® TM The NETGEAR ProSafe GS110TP Hardware Installation Guide describes how to install and power on the GS110TP Smart PoE Switch. The information in this manual is intended for readers with intermediate computer and Internet skills. Conventions, Formats, and Scope The conventions, formats, and scope of this manual are described in the following paragraphs: • Typographical Conventions. This manual uses the following typographical conventions: Italic Emphasis, books, CDs, file a
Inhaltszusammenfassung zur Seite Nr. 6
GS110TP Hardware Installation Guide Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. • Scope. This manual is written for the GS110TP Smart PoE Switch according to these specifications: Product Version GS110TP Smart PoE Switch Manual Publication Date March 2010 Note: Product updates are available on the NETGEAR, Inc. website at http://kbserver.netgear.com/products/GS110TP.asp. How to Print this Manual To print this manual, use the Co
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1 Introduction Congratulations on the purchase of your NETGEAR GS110TP Smart PoE Switch. The GS110TP Smart PoE Switch is a supplement to the Gigabit Advanced Smart Switch family. Available as a desktop or wall-mountable switch, the GS110TP Smart PoE Switch is not intended to be rack- mountable. The GS110TP is a PoE-supportable, low-port switch with two fiber uplinks included. This chapter serves as an introduction to the GS110TP Smart PoE Switch and provides the following informatio
Inhaltszusammenfassung zur Seite Nr. 8
GS110TP Hardware Installation Guide The GS110TP Smart PoE Switch is a free-standing switch. It is IEEE-compliant and offers low latency for high-speed networking. All ports can automatically negotiate to the highest speed. This capability makes the switch ideal for environments that have a mix of Ethernet, Fast Ethernet, or Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex mode. The maximum segment length is 328 feet (100 meters) over Category 5 Uns
Inhaltszusammenfassung zur Seite Nr. 9
GS110TP Hardware Installation Guide • Standard NETGEAR 1xx series chassis. • NETGEAR Green product features. • External 48V/1.25A PA. PoE Features The GS110TP Smart PoE Switch supports IEEE 802.3af PSE features: • Ports 1 through 8 support IEEE 802.3af, Alternative A (MDI-X). • PoE is enabled by default. Green Features The GS110TP Smart PoE Switch supports the following power-saving features: • The power consumption automatically adjusts based on the RJ-45 cable length. • Each port is configured
Inhaltszusammenfassung zur Seite Nr. 10
GS110TP Hardware Installation Guide Package Contents Figure 1-1 shows the package contents of the NETGEAR GS110TP Smart PoE Switch. Figure 1-1 Verify that the package contains the following: • NETGEAR GS110TP Smart PoE Switch • Rubber footpads for tabletop installation • Wall mounting screws (2) • External power adapter • Installation guide • Smart Switch Resource CD with Netgear Smart Control Center and User’s manual If any item is missing or damaged, contact the place of purchase immediately
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2 Physical Description This chapter describes the NETGEAR GS110TP Smart PoE Switch hardware features. Topics include: • GS110TP Front and Back Panel Configuration • LED Designations • Device Hardware Interfaces GS110TP Front and Back Panel Configuration The GS110TP Smart PoE Switch has eight 10/100/1000 Mbps autosensing and two 1000 Mbps SFP Gigabit Ethernet switching ports. Each RJ-45 port is capable of sensing the line speed and negotiating the duplex mode with the link partner aut
Inhaltszusammenfassung zur Seite Nr. 12
GS110TP Hardware Installation Guide • Power and Status LED • PoE Max LED Figure 2-2 illustrates the NETGEAR GS110TP Smart PoE Switch back panel. Power Connector Figure 2-2 The back panel contains the following: • A DC input for the supplied 48V/1.25A external power adapter LED Designations Port LEDs The following table describes the RJ-45 and SFP port LED designations. There are two LEDs for each RJ-45 port. Each SFP port has its own indication LED. Table 2-1. Port LEDs LED Designation Speed
Inhaltszusammenfassung zur Seite Nr. 13
GS110TP Hardware Installation Guide Table 2-1. Port LEDs (continued) LED Designation PoE Status • Off = No PoE powered device (PD) connected. (Right LED on each RJ-45 port) • Solid Green = The PoE PD is connected and the port is supplying power successfully. • Flashing Yellow = One of the following failures resulted in stopping power to that port: – Short circuit on PoE power circuit. – PoE power demand exceeds power available. – PoE current exceeds PD's classification. – Out of proper voltag
Inhaltszusammenfassung zur Seite Nr. 14
GS110TP Hardware Installation Guide To simplify the procedure for attaching devices, all RJ-45 ports support Auto Uplink. This technology allows attaching devices to the RJ-45 ports with either straight-through or crossover cables. When inserting a cable into the switch’s RJ-45 port, the switch automatically: • Senses whether the cable is a straight-through or crossover cable. • Determines whether the link to the attached device requires a “normal” connection (such as when connecting the port
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 3 Applications Your NETGEAR GS110TP Smart PoE Switch is designed to provide flexibility in configuring your network connections. It can be used as a stand-alone device or with 10 Mbps, 100 Mbps, and 1000 Mbps hubs and switches. Desktop Switching The GS110TP Smart PoE Switch can be used as a desktop switch to build a small network that enables users to have 1000 Mbps access to a file server. With full-duplex enabled, the switch port connected to the server or PC can provide 2000 Mbps
Inhaltszusammenfassung zur Seite Nr. 16
GS110TP Hardware Installation Guide 3-2 Applications v1.0, March 2010
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 4 Installation This chapter describes the installation procedures for your NETGEAR GS110TP Smart PoE Switch. Switch installation involves the following steps: Step 1: Preparing the Site Step 2: Installing the Switch Step 3: Checking the Installation Step 4: Connecting Devices to the Switch Step 5: Applying AC Power Step 6: Managing the Switch using a Web Browser or the PC Utility Step 1: Preparing the Site Before you install the switch, ensure the operating environment meets the site r
Inhaltszusammenfassung zur Seite Nr. 18
GS110TP Hardware Installation Guide Table 4-1. Site Requirements (continued) Characteristics Requirements Power source Provide a power adapter (included). Power specifications for the switch are shown in Appendix A . Ensure the AC outlet is not controlled by a wall switch, which can accidentally turn off power to the outlet and the switch. Environmental • Temperature - Install the switch in a dry area, with ambient temperature between 0 and 50ºC (32 and 122ºF). Keep the switch away from heat
Inhaltszusammenfassung zur Seite Nr. 19
GS110TP Hardware Installation Guide Step 3: Checking the Installation Before applying power to the switch, perform the following: • Inspect the equipment thoroughly. • Verify that all cables are installed correctly. • Check cable routing to make sure cables are not damaged or creating a safety hazard. • Ensure all equipment is mounted properly and securely. Step 4: Connecting Devices to the Switch The following procedure describes how to connect PCs to the switch’s RJ-45 ports. The GS110TP Smar
Inhaltszusammenfassung zur Seite Nr. 20
GS110TP Hardware Installation Guide Connect each PC to an RJ-45 network port on the Switch front panel ( Figure 4-1 ). Use Category 5 (Cat5) Unshielded Twisted-Pair (UTP) cable terminated with an RJ-45 connector to make these connections. Note: Ethernet specifications limit the cable length between the switch and the attached device to 100 m (328 ft.). Step 5: Applying AC Power Before connecting the power cord, select an AC outlet that is not controlled by a wall switch, which can turn off p
