Bedienungsanleitung Home Automation UPB 60A00-1 HAI 15A

Inhaltszusammenfassung zur Seite Nr. 1

HAI UPB™ Appliance Module
Installation and Operating Instructions

For the following Models:

60A00-1 HAI 15A Appliance Module

READ THESE INSTRUCTIONS BEFORE INSTALLING DEVICE

This HAI UPB™ Appliance Module is intended for installation in accordance with the National Electrical Code and local codes and
regulations. Retain these instructions

Inhaltszusammenfassung zur Seite Nr. 2

INSTALLATION INSTRUCTIONS The HAI UPB™ Appliance Module is simply plugged into a standard wall outlet. Load Information The total load of the UPB™ controlled outlet must not exceed 15 Amps or ½ Horsepower. Switch Trigger Operation The Appliance Module can be configured to sense the load’s local on/off switch (switch trigger) to turn the load on even after it was turned off via UPB™ control. By default, the Appliance Module has the switch trigger operation disabled. Note:

Inhaltszusammenfassung zur Seite Nr. 3

SPECIFICATIONS Motor Load Maximum ½ HP Current Maximum Non-Dimming 15A Connections Standard receptacle LED Indicator Yes Dimensions 3” x 2” x 1.3” Weight 0.25 lb. Mounting Plug-in Input Power 120 ± 12 VAC Input Frequency 60 ± 3 Hz Operating Temperature -40 °F to 104 °F LIMITED WARRANTY HAI warrants this product against defects in material and workmanship, under normal use and service, for a period of two (2) years from the date of purchase. During the warranty period, HAI