Inhaltszusammenfassung zur Seite Nr. 1
2x2 DPKVM
Switch
EXT-DPKVM-422
User Manual
www.gefen.com
Inhaltszusammenfassung zur Seite Nr. 2
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. 2x2 DPKVM Switch is a trademark of Gefen LLC © 2011 Gefen, LLC.
Inhaltszusammenfassung zur Seite Nr. 3
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting the 2x2 DPKVM Switch 7 Operating the 2x2 DPKVM Switch 8 RMT-2IR Remote Control Description 9 RMT-21IR Remote Installation 10 Infared (IR) Code Channel Confi guration 11 RS-232 Serial Control Interface 12 Additional Switching Options 13 Specifi cations 14 Warranty
Inhaltszusammenfassung zur Seite Nr. 4
INTRODUCTION Congratulations on your purchase of the 2x2 DPKVM Switch. Your complete satisfaction is very important to us. Gefen Gefen is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you fi nd your solutions. Don’t se
Inhaltszusammenfassung zur Seite Nr. 5
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 2X2 DPKVM SWITCH • The 2x2 DPKVM Switch supports Pass-through EDID. The Switch will use the EDID from the currently active input. • Dual Link resolutions up to 2560 x 1600 are supported. 2
Inhaltszusammenfassung zur Seite Nr. 6
FEATURES Features • Switches two high-defi nition displays between two DisplayPort-equipped computers with audio/video and USB peripherals • Supports up to 1920 x 1200 with a single link monitor • Supports up to 2560 x 1600 with dual link monitor • Supports RGB and YCbCr color spaces • Rack mountable • Save space on your desktop Supports • USB 2.0 Compatible and backward compatible with USB 1.1 devices. Application • Ideal for Computer Work station Package Includes (1) 2x2 DPKVM Switch (4) 6-fo
Inhaltszusammenfassung zur Seite Nr. 7
PANEL LAYOUT Front Panel 234 1 Back Panel 9 10 12 14 5 6 7 8 11 13 4
Inhaltszusammenfassung zur Seite Nr. 8
PANEL DESCRIPTIONS 1 I/R Receiver Receives I/R signal from the handheld Infrared remote control unit included with the 2x2 DVI KVM Switch. 2 LED Input Status Indicator 1 & 2 This currently selected source input will be indicated with an active LED. 3 Input Selector Button Pressing this button will cycle the input, 1 or 2, which will be selected for output. 4 Pow
Inhaltszusammenfassung zur Seite Nr. 9
CONNECTING THE 2X2 DPKVM SWITCH Connecting Source Devices to the 2x2 DPKVM Switch 1. Connect up to two DisplayPort source devices to the DisplayPort inputs on the 2x2 DPKVM Switch using the included DisplayPort cables. 2. Connect up to two audio sources to the 3.5mm analog audio mini-jack inputs using the included audio cables. 3. Connect up to two USB source devices to the USB Type B inputs using the included USB Type A to B cables. 4. Connect a DisplayPort supported display to the Displa
Inhaltszusammenfassung zur Seite Nr. 10
OPERATING THE 2X2 DPKVM SWITCH How to Operate the 2x2 DPKVM Switch Switching can be accomplished via the front panel selector button, infrared (IR) remote control, or the RS-232 communications port. Additional switching options can be found on page 12 1 For information on switching via the front panel selector button, please see this page. 2 For information on switching via the infrared (IR) remote control, please see page 8. 3 For information on switching via RS-232 serial communicat
Inhaltszusammenfassung zur Seite Nr. 11
RMT-2IR REMOTE CONTROL DESCRIPTION 1 2 1 Pressing this button will select Input 1 as the source. All devices connected to the input ports labeled 1 will be selected and output. 2 Pressing this button will select Input 2 as the source. All devices connected to the input ports labeled 2 will be selected and output. 8
Inhaltszusammenfassung zur Seite Nr. 12
RMT-2IR REMOTE INSTALLATION To use the RMT-2IR remote, remove the battery cover on the back of the remote to reveal the battery compartment. Insert the included battery into the open battery slot. The positive (+) side should be facing up. Ensure that both DIP (Dual Inline Package) switches are in the OFF position. Replace the battery cover. The remote ships with 2 batteries. One battery is needed for operation and the other battery is complimentary. Empty Battery Slot IR Code DIP S
Inhaltszusammenfassung zur Seite Nr. 13
INFRARED (IR) CODE CHANNEL CONFIGURATION How to Resolve IR Code Confl icts In the event that IR commands from other remote controls confl ict with the supplied RMT-2IR remote control, changing the remote channel will alleviate this issue. The RMT-2IR remote control and the 2x2 DPKVM Switch both have banks of DIP (Dual Inline Package) switches for confi guring the remote channel that both units use to communicate. These settings must exactly match each other for proper operation.
Inhaltszusammenfassung zur Seite Nr. 14
RS-232 SERIAL CONTROL INTERFACE What features are available via the RS-232 serial communications port? The 2x2 DPKVM Switch can accept commands through the RS-232 serial communications port located on the rear panel. The current RS-232 control features are: • Switching of inputs. How do I use these features? These features were initially intended for utilization by custom installers in automated setups. However, these features can be tested by using any Windows PC with the Hype
Inhaltszusammenfassung zur Seite Nr. 15
ADDITIONAL SWITCHING OPTIONS The underside of the 2x2 DPKVM Switch features a DIP switch bank that is used to confi gure additional features. DIP switch 3 is used to control the function of Contact Closure-type remote controls on the rear panel. This port can be confi gured to accept additional switching devices ON OFF 1 2 3 4 1 IR Channel 2 IR Channel 3 Remote/Closure 4 Not Used DIP Switch 3 Enabling DIP switch 3 will allow th
Inhaltszusammenfassung zur Seite Nr. 16
SPECIFICATIONS Input Connector....................................................(4) DisplayPort (from computers) Output Connector...........................................................(2) DisplayPort (to display) Input Connector..........................................(2) USB 2.0 Type “B” (from computers) Output Connector..................................(2) USB 2.0 Type “A” (to keyboard/mouse) Input Connector...............................(2) 3.5mm analog L/R audio (from computers) Outpu
Inhaltszusammenfassung zur Seite Nr. 17
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notifi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi cations. Equipment that fails under conditions other than those covered will be repaired at the current price of
Inhaltszusammenfassung zur Seite Nr. 18
Inhaltszusammenfassung zur Seite Nr. 19
Rev A1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com Pb This product uses UL listed power supplies.
