Inhaltszusammenfassung zur Seite Nr. 1
User Guide
Gateway Unmanaged Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 2
Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Gigabit Ethernet technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Switching technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Switch descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Featur
Inhaltszusammenfassung zur Seite Nr. 3
B Safety, Regulatory, and Legal Information. . . . . . . . . . . . . . . . . . . . . . .31 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ii
Inhaltszusammenfassung zur Seite Nr. 4
Introduction 1 This chapter provides you with an introduction to several Gateway unmanaged switches. Read this chapter to learn about: ■ Gigabit Ethernet technology ■ Switching technology ■ Switch descriptions ■ Features ■ Front panel components ■ LED indicators ■ Rear panel descriptions ■ Side panel descriptions 1
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 1: Introduction Gigabit Ethernet technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet. It uses the same packet structure, format, and support for CSMA/CD protocol, full duplex, and flow control, but with a tenfold increase in theoretical throughput over 100-Mbps Fast Ethernet and a hundredfold increase over 10-Mbps Ethernet. Because it is compatible with all 10-Mbps and 100-Mbps Ethernet environments, Gigabit Ethernet provides a straightforward upgrade without wasting
Inhaltszusammenfassung zur Seite Nr. 6
Switch descriptions For Fast Ethernet or Gigabit Ethernet networks, a switch is an effective way of eliminating problems of chaining hubs beyond the “two-repeater limit.” A switch can be used to split parts of the network into different collision domains, for example, making it possible to expand your Fast Ethernet network beyond the 205-meter network diameter limit for 100BASE-TX networks. Switches supporting both traditional 10Mbps Ethernet and 100Mbps Fast Ethernet are also ideal for br
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 1: Introduction ■ Supports 2M bits data buffer per device. ■ Front-panel indicator LEDs. Front-panel components The front panels of the switches consist of LED indicators and fast Ethernet or gigabit Ethernet ports. The number of LEDs, and the number and speed of the ports, depends on the switch model selected. Comprehensive LED indicators display the status of the switches and the network. Gateway 7201-16 (shown) and 7201-24 fast Ethernet switches Fast Ethernet Speed LEDs Ports 1-8 P
Inhaltszusammenfassung zur Seite Nr. 8
Switch descriptions Gateway 7201-24.2 fast Ethernet/gigabit Ethernet switch Fast Ethernet Speed LEDs Ports 1-8 Ports 9-16 Ports 17-24 Power Link/Act Port 25 and LEDs LED LEDs Port 26 and LEDs Gigabit Ethernet Gateway 7401-05 (shown) and 7401-08 gigabit Ethernet switches Gigabit Ethernet Speed LEDs Ports 1-5 Link/Act LEDs Power Duplex LEDs LED www.gateway.com 5
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1: Introduction Gateway 7401-24 gigabit Ethernet switch Gigabit Ethernet Speed LEDs Ports 1-8 Ports 9-16 Ports 17-24 Power LED Link/Act LEDs LED Indicators The LED indicators on the switches include Power, Link/Act, and Speed. The Gateway 7401-05 and 7401-08 also have a Duplex LED. The following shows the LED indicators for the various switches, and the table provides an explanation of what each LED indicates. Gateway 7401-05 (shown) and 7401-08 switches www.gateway.com 6
Inhaltszusammenfassung zur Seite Nr. 10
Switch descriptions Gateway 7201-16, 7201-24 (shown), 7201-24.2, and 7401-24 switches LED Indicates Power This indicator will light steady green immediately after the switch is powered on to indicate the ready state of the device. Link/Act This indicator lights green when the port is connected to a Gigabit Ethernet, Fast Ethernet, or Ethernet station. If the indicator is blinking green, data is either being transmitted or received. Speed This LED indicator is dark when the port is connected
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 1: Introduction Side panel description The sides of the system provide heat vents that help to dissipate heat. Do not block these openings, and leave at least 6 inches (152.3 mm) of space at the rear and sides of the switch for correct ventilation. Warning Without correct heat dissipation and air circulation, system components might overheat, which could lead to system failure. www.gateway.com 8
Inhaltszusammenfassung zur Seite Nr. 12
Installation 2 This chapter provides you with information on how to install your Gateway switch. Read this chapter to learn about: ■ Package contents ■ Preparing to connect to the network ■ Installing the 5- and 8-port switches ■ Installing the 16- and 24-port switches 9
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 2: Installation Before you connect to the network The site where you install the switch may greatly affect its performance. Please follow these guidelines for setting up the switch: ■ Install the switch on a sturdy, level surface that can support at least 6.6 lbs. (3 kg) of weight. Do not place heavy objects on the switch. ■ The power outlet should be within 6 feet (1.82 meters) of the switch. ■ Visually inspect the power cord and see that it is fully secured to the AC power port. ■ M
Inhaltszusammenfassung zur Seite Nr. 14
Installing the 5- and 8-port switches Installing the 5- and 8-port switches Package contents Open the shipping carton and carefully unpack its contents. The carton should contain the following items: ■ One Gateway 7401-05 5-port, or 7401-08 8-Port 10/100/1000BASE-T Gigabit Ethernet switch ■ Four rubber feet with adhesive backing ■ One external power adapter ■ This manual If any item is found missing or damaged, contact Gateway for a replacement. Attaching the rubber feet Position and apply ru
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2: Installation After the switch is turned on, the LED indicators will momentarily blink, showing a reset of the system. Power failure If a power failure occurs, unplug the switch. When power is resumed, plug the switch back in. www.gateway.com 12
Inhaltszusammenfassung zur Seite Nr. 16
Installing the 16- and 24-port switches Installing the 16- and 24-port switches Package contents Open the shipping carton of the switch and carefully unpack its contents. The carton should contain the following items: ■ One Gateway 7201-16, 16-port or 7201-24, 24-port 10/100BASE-T Fast Ethernet switch, or 7401-24, 24-port 10/100/1000BASE-T Gigabit Ethernet switch, or 7401-24.2, 24-port + 2 10/100/1000BASE-T Gigabit Ethernet switch. ■ Accessory pack, including 2 mounting brackets and screws.
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2: Installation Installing the 16- and 24-port switches in a rack The switch can be mounted in a standard 19” rack. Use the following illustrations to guide you. Warning Before attaching rack mounting hardware, make sure that the switch is turned off and all power cords are unplugged. Warning The rack cabinet must provide sufficient airflow to the front of the switch to maintain correct cooling. It must also include ventilation sufficient to exhaust the heat generated by the equip
Inhaltszusammenfassung zur Seite Nr. 18
Installing the 16- and 24-port switches 3 With the assistance of another person, hold the switch in place in the rack and secure with two screws and nuts on each side (provided. 4 Install the cables and power cord. Power on Plug one end of the AC power cord into the power connector of the switch and the other end into the local power source outlet. After the switch is turned on, the LED indicators will momentarily blink. This blinking of the LED indicators represents a reset of the system. Po
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2: Installation www.gateway.com 16
Inhaltszusammenfassung zur Seite Nr. 20
Connecting the Switch 3 This chapter provides you with information on connecting Gateway unmanaged switches. Read this chapter to learn about: ■ Connecting to an end node ■ Connecting to a hub or switch ■ Connecting to a network backbone or server 17
