Inhaltszusammenfassung zur Seite Nr. 1
Installation Guide
xi xi xi
RGB 400xi xi Series Installation Guide
MK Box-Mounted Interface
Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan
1230 South Lewis Street Beeldschermweg 6C 135 Joo Seng Road, #04-01 Daisan DMJ Building 6F
Anaheim, CA 92805 3821 AH Amersfoort PM Industrial Building 3-9-1 Kudan Minami
68-636-02 Rev. B
USA The Netherlands Singapore 368363 Chiyoda-ku, Tokyo 102-0074 Japan
714.491.1500 +31.33.453.4040 +65.6383.4400 +8
Inhaltszusammenfassung zur Seite Nr. 2
Precautions Safety Instructions • English Warning Extron’s Warranty Power sources This equipment should be operated only from the power source This symbol is intended to alert the user of important indicated on the product. This equipment is intended to be used with a main operating and maintenance (servicing) instructions power system with a grounded (neutral) conductor. The third (grounding) pin is in the literature provided with the equipment. Extron Electronics warrants this product agains
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents About this Guide ....................................................................... 1 Installation Overview ............................................................. 1 Installation Instructions........................................................ 2 Preparing the site and installing the MK box ......................... 2 Mounting the interface MK to the knockout box.................. 3 Specifications ...................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents, cont’d About this Guide This guide contains instructions for mounting the Extron RGB 460xi and 472xi MK interfaces in a standard, 2-gang MK- style or KO-style knockout switch box that is used in Singapore, the United Kingdom, and Australia. The box used must have a depth of 47 mm at a minimum. This interface is a standard RGB 460xi or RGB 472xi interface, mounted to a faceplate, tailored to fit in the MK box. In this guide, the terms “RGB 400xi Series MK interface” and “inte
Inhaltszusammenfassung zur Seite Nr. 5
Installation, cont’d To prevent short circuits, the outer foil shield can be Installation Instructions cut back to the point where the cable exits the cable The MK box is not included with the interface; the clamp. Both braided and foil shields should be installer is responsible for obtaining and installing the connected to an equipment ground at the other end box. of the cable. The MK box must have a minimum depth of 47 mm. 7. Insert the MK box into the opening, and secure it to the wall stud
Inhaltszusammenfassung zur Seite Nr. 6
Installation, cont’d 3. Mount the interface’s faceplate to the knockout box with General M3, 30 mm machine screws (figure 3). Power ............................................. 9 to 24VDC, 0.25 A, 5 watts, external (The power supply is included.) Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non condensing Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non condensing Installation Cable Rack mount ................................... No, but MK bo
Inhaltszusammenfassung zur Seite Nr. 7
Installation, cont’d Accessories High-resolution cables Part number Audio connector Part number BNC-5-3’HR 26-260-15 3.5 mm stereo plug 10-306-01 BNC-5-6’HR 26-260-01 MK mounting bracket BNC-5-12’HR 26-260-02 (black, white, unfinished) 70-086-16, -26, -56 BNC-5-25’HR 26-260-03 BNC-5-50’HR 26-260-04 Accessories Part number BNC-5-75’HR 26-260-16 Mac/VGA adapter BNC-5-100’HR 26-260-05 (VGA male, Mac female, Mac RGBS, 1’) 26-340-01 BNC-5-3’HRP (plenum) 26-378-01 Mac HV/VGA adapter BNC-5-6’HRP (plenu
Inhaltszusammenfassung zur Seite Nr. 8
.0 .539 .000 2X 1.635 .474 4X 2.110 2.600 3X 3.010 1.570 1.570 1.945 2.020 3.535 2.220 2X 3.910 2.850 2X 4.385 3.655 5.289 3.900 AA 4.320 4.320 5.830 5.224 5.700 0.224 0.449 Installation, cont’d RGB 400xi xi xi xi xi Series MK Dimensions The dimension drawings (figures 4 and 5) are not 100% size. Figure 4 — RGB 460xi xi xi xi xi MK Dimensions Figure 5 — RGB 472xi xi xi xi xi MK Dimensions 8 RGB 400xi xi xi xi xi Series Installation Guide RGB 400xi xi xi Series Installation Guide 9 xi xi 0.125 TH
Inhaltszusammenfassung zur Seite Nr. 9
Installation, cont’d MK Interface cut-out template Figure 6 — Cut-out template 10 RGB 400xi xi xi xi xi Series Installation Guide Template for the MK mounting bracket The inside solid line (3.38” H x 5.70” W) represents the outside edge of the RGB 460xi wall plate. The outside solid line (3.5” H x 5.83” W) represents the outside edge of the RGB 472xi wall plate. The dashed line indicates the recommended cut-out area (2.68” H x 5.25” W) for the installation surface.
Inhaltszusammenfassung zur Seite Nr. 10
Precautions Safety Instructions • English Warning Extron’s Warranty Power sources This equipment should be operated only from the power source This symbol is intended to alert the user of important indicated on the product. This equipment is intended to be used with a main operating and maintenance (servicing) instructions power system with a grounded (neutral) conductor. The third (grounding) pin is in the literature provided with the equipment. Extron Electronics warrants this product agains
Inhaltszusammenfassung zur Seite Nr. 11
Installation Guide xi xi xi RGB 400xi xi Series Installation Guide MK Box-Mounted Interface Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan 1230 South Lewis Street Beeldschermweg 6C 135 Joo Seng Road, #04-01 Daisan DMJ Building 6F Anaheim, CA 92805 3821 AH Amersfoort PM Industrial Building 3-9-1 Kudan Minami 68-636-02 Rev. B USA The Netherlands Singapore 368363 Chiyoda-ku, Tokyo 102-0074 Japan 714.491.1500 +31.33.453.4040 +65.6383.4400 +8
