Inhaltszusammenfassung zur Seite Nr. 1
®
GE Zoneline packaged
terminal air conditioners
2007 contract sales architects and engineers data manual
Inhaltszusammenfassung zur Seite Nr. 2
Quick Reference Full Specs on pages 54 and 55 ALL UNITS REQUIRE POWER CONNECTION KIT Power Connection Kit determines resistance heat output 7000 Btuh units do not activate 5 KW resistance heater Dry Air 25 2800 Series Cooling with Electric Heat 2800 Series Cooling with Electric Heat MODEL COOLING MODEL COOLING EER EER NUMBER (Btuh) NUMBER (Btuh) AZ28E07DA* 7100/6900 12.7/12.7 AZ28E07DAP 6800/6600 12.1/12.1 AZ28E09DA* 9300/8900 12.0/12.0 AZ28E09DAP 8600/8400 11.5/11.5 AZ28E12DA* 11800/11500
Inhaltszusammenfassung zur Seite Nr. 3
ge.com Power Connection Kits 2 0/208-Volt Line Cord Connection Units 2 0/208-Volt Sub-Base and Direct Connected Units Electric Electric Electric Min. Circuit Direct Electric Electric Electric Min. Circuit Line Cord Heat Heater Heat Protection Sub-Base Connection Heat Heater Heat Protection Kit BTUH Watts Amps (Amps) Kit BTUH Watts Amps (Amps) RAK 15 8600/7100 2550/2090 11.6/10.6 15 RAK204D15P RAK4157 8600/7100 2550/2090 11.6/10.6 15 RAK 20 11700/9600 450/2820 15.5/14.1
Inhaltszusammenfassung zur Seite Nr. 4
® The Zoneline 2800, 800 and 5800 Series have incorporated changes suggested by customers, along with enhancements by GE’s Technology Team and changes necessary to meet new UL and NEC requirements. “L” shaped condenser coil. The “Partial Open Vent Air” feature was a specific request by a customer. “Heat Sentinel” is an enhancement developed by GE’s Technology Team to help lodging professionals welcome their guests with a moderate-temperature room and to help lower cooling costs. Devi
Inhaltszusammenfassung zur Seite Nr. 5
ge.com Table of Contents Front Cover 1 Mini Specs 2800, 800 and 5800 Series 2 Mini Specs Power Connection Kits and Nomenclature The 2800/ 800/5800 and Dry 25 4 Table of Contents 5 Introduction 6 The Zoneline System 7 Features and Benefits Features Table 8 Features and Benefits 9-11 Auxiliary Control Switches 12-1 Central Desk Control 14 Remote Thermostat Control 15-17 Heat Pumps and Energy Savings 18-19 Installation and Dimensions Application Comments 20 Case Dimensions 21 Wall Case/Sub-Ba
Inhaltszusammenfassung zur Seite Nr. 6
Introduction This manual is designed to provide product, performance Premium Line Standard Features: and application information to our customers and their All the Standard Features of the Deluxe Line Plus: architects and engineers for use in selection and design • T wo fan motor system with Indoor Cross Flow Blower ® of a zonal comfort control system utilizing GE Zoneline for quieter operation Packaged Terminal Air Conditioners (PTAC) and Packaged • Digital Controls Terminal Heat Pump
Inhaltszusammenfassung zur Seite Nr. 7
ge.com ® The Zoneline System The typical Zoneline installation consists of the wall case (or sleeve), chassis, and exterior grille. Some installations may use a sub-base for support of the unit or for ease of electrical connections. Each of the components should be the standard products offered by GE or, in the case of the exterior grille, approved by GE Applications Engineering. Use of components not specifically designed or approved for use with the Zoneline can result in unsatisfactory op
Inhaltszusammenfassung zur Seite Nr. 8
® Zoneline Features AZ AZ AZ 2800 800 5800 Enhanced Dehumidification — Dry Air 25 Optional N/A N/A Cooling EER Range (2 0 Volts/265 Volts) 10.2 - 12.7 10.0 - 12.7 10.2 - 1 .0 Heating COP Range (2 0 Volts/265 Volts) N/A .2 - .6 .2 - .6 Heat Source — Electric Resistance Heat Standard — — Heat Source — Heat Pump With Selectable Full Time or On Demand Simultaneous/ Supplemental Resistance Heat — Standard Standard Staged Heating — Stage Stage Universal Heater — UPC* Standa
Inhaltszusammenfassung zur Seite Nr. 9
ge.com Features and Benefits Standard Physical Dimensions Reverse Cycle Heat Pump Defrost System GE has maintained the same dimensions since 1961 — Standard on all Zoneline 800 and 5800 Series heat pumps. 42" wide x 16" high x 1 - /4" deep Enables heat pump to operate at lower temperatures Replacement of older units is made easy. when other systems switch to more expensive electric resistance heat. Weather-Protected Electrical Components See pages 18 and 19 for discussion of heat pump o
Inhaltszusammenfassung zur Seite Nr. 10
Features and Benefits Fan-Only Setting – HIGH/LOW Indoor Coil Frost Control The unit provides the option of selecting either HIGH or LOW Prevents indoor coil from freezing speed for Fan-Only operation. and causing complaints due to lack of cooling. Frost can form on the Fan-Cycle Switch – “SmartFan” indoor coil when the unit is operated Unique “SmartFan” allows unit to operate fan continuous in in cooling when outdoor temperatures cooling operation and fan cycle in heating to provide bette
Inhaltszusammenfassung zur Seite Nr. 11
ge.com Features and Benefits Up-Front Air Filters Corrosion Protection (Optional) Two interchangeable 2800 and 800 Series units may be ordered with special up-front filters, easy protection to better withstand damage from salt air and to remove and reinstall, salt water in seacoast areas. may be cleaned without Corrosion protection is standard on the 5800 Series and opening or removing on Dry Air 25 models. the room front. Heat Pump units with ICR are not available with corrosion
Inhaltszusammenfassung zur Seite Nr. 12
Auxiliary Control Switches These switches are located behind the room cabinet under the control panel. 2800 and 800 Series S witches Description Left Switches (1) ALL I2R H eat pump override — Down — Normal heat pump operation Up — resistance heat only ( 800 Series only) (2) C: FAN Fan control for cooling operation — Down — Fan Continuous Up — Fan Cycle ( ) H: FAN Fan control for heating operation — Down — Fan Cycle Up — Fan Continuous (4) CLASS 2 Remote Ther
Inhaltszusammenfassung zur Seite Nr. 13
ge.com Auxiliary Control Switches These switches are located behind the room cabinet under the control panel. 5800 Series Switches Description L eft Switches (1) ALL I2R Heat pump override — Down — Normal heat pump operation Up — resistance heat only (2) C: FAN Fan control for cooling operation — Down — Fan Continuous Up — Fan Cycle ( ) H: FAN F an control for heating operation — Down — Fan Cycle Up — Fan Continuous (4) CLASS 2 R emote Thermostat Mode — Down —
Inhaltszusammenfassung zur Seite Nr. 14
Central Desk Control Some installations may want to govern the ability of the unit 4. R ecommended wire size must be followed as a minimum to operate from a control device remote to the unit or even requirement. remote to the room in which the unit is located. The general Wire Size #AWG Maximum Allowable Length term given to systems such as this is Central Desk Control. #22 600 Ft. The most common installation of this type of system is a #20 900 Ft. switch mounted at the registration de
Inhaltszusammenfassung zur Seite Nr. 15
ge.com Remote Thermostat Control In some installations, control of the operation of the unit at The AC voltage may not be compatible with some a location remote from the unit itself may be desired. A unit solid-state thermostats. mounted high in the wall or over a door, for instance, where The fan speed for the 2800 Series in remote thermostat the unit-mounted controls are inaccessible, can be connected operation is selected by the connection of the fan wire from to a wall-mounted therm
Inhaltszusammenfassung zur Seite Nr. 16
Remote Thermostat Control Temperature Boost option should not be used with remote Heat Pump Models thermostat operation since this will cause the unit to switch to ® The Zoneline 800 and 5800 Series heat pump units may resistance heat when outdoor temperatures are below 46ºF. be connected to a single-stage cooling/two-stage heating thermostat designed for use with heat pump systems. GE Feature Heat Pump Electric Heat offers thermostats compatible with the 800 and 5800 Indoor Frost
Inhaltszusammenfassung zur Seite Nr. 17
ge.com Remote Thermostat Control integral transformer, direct wiring can result in a “bucking” Multiple Units Connected to One Remote Thermostat or boosting” voltage condition, and is in violation of the (2800 Series) National Electric Code. The diagram below shows the One remote control thermostat may be used to control correct wiring for such an installation through the use multiple resistance heat Zoneline units, however the units of field supplied isolation relays. may not be wired
Inhaltszusammenfassung zur Seite Nr. 18
Heat Pumps and Energy Savings ® • GE Zoneline Heat Pumps are designed to provide Balance Point cost-efficient heat pump operation while monitoring An important consideration of the selection of a heat pump room conditions to maintain comfort. unit is the “balance point” of the installation. Virtually every The units employ a logic system monitoring both outdoor room is unique — with different insulation — different sizes and indoor temperatures to determine the heat source, thus and ty
Inhaltszusammenfassung zur Seite Nr. 19
ge.com Heat Pumps and Energy Savings The Quick Heat Recovery feature is not affected by the Heat Heat Pump Operation — Source Logic shown in the chart above. For more information Zoneline 800 and 5800 Series about the Quick Heat Recovery Feature, see page 9. The Heat sources: Heat pump, heat pump and simultaneous full heat output of the resistance heater is dependent upon electric resistance heat or electric resistance heat. circuit amperage and the power connection kit used. See Zonel
Inhaltszusammenfassung zur Seite Nr. 20
Application Comments Use and Care Manual and installation instructions are High Wall Mount — For units ® shipped with Zoneline units. It is important that any air mounted high in the wall, the conditioning system be properly sized and applied in order discharge louvers should be to achieve the desired temperature and humidity levels with at a setting that provides the the space to be conditioned. Air conditioners are designed most horizontal air discharge. 50° primarily to provide heatin
