Inhaltszusammenfassung zur Seite Nr. 1
Linksys Business Series 24-port Gigabit Ethernet Switch
Model SGE2000
QUICK INSTALLATION GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
Linksys Business Series SGE2000 Gigabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 3
Linksys Business Series SGE2000 Gigabit Ethernet Switch 1 Linksys Business Series SGE2000 Gigabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 4
Install: Desktop 2 Linksys Business Series SGE2000 Gibabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 5
TM Install: Wall 3 140988 Linksys Business Series SGE2000 Gigabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 6
TM Install: Wall 4 Linksys Business Series SGE2000 Gibabit Ethernet Switch 180911
Inhaltszusammenfassung zur Seite Nr. 7
Install: Rack 5 Linksys Business Series SGE2000 Gigabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 8
Connect Devices 6 Linksys Business Series SGE2000 Gibabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 9
Connect Linksys One Devices 7 Linksys Business Series SGE2000 Gigabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 10
Connect to Power 8 Linksys Business Series SGE2000 Gibabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 11
Install: Stack 9 Before setting up stacked switches in your network, see the technical bulletin, “Linksys Stackable Switches: How to Build Stacks and Understand Their Operation,” available at www.linksys.com. 180777 Linksys Business Series SGE2000 Gigabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 12
Install: Stack 10 Warning Use only ports G1/G2 for stacking. If you manually assign a Unit ID to one unit, you should manually assign Unit IDs to all units. Using both system-assigned and manually-assigned IDs in your network can impact system performance. Linksys Business Series SGE2000 Gibabit Ethernet Switch 181055
Inhaltszusammenfassung zur Seite Nr. 13
Connect Devices 11 Linksys Business Series SGE2000 Gigabit Ethernet Switch
Inhaltszusammenfassung zur Seite Nr. 14
Connect to Power 12 Linksys Business Series SGE2000 Gibabit Ethernet Switch 180780
Inhaltszusammenfassung zur Seite Nr. 15
Regulatory Compliance and Safety Information The Linksys One SFE2000 Fast Ethernet switch meets the following regulatory compliance and safety standards: Specification Description Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed below. Safety UL 60950-1 IEC60950-1 CB / TUV/Rh CSA-C22.2 No. 60950 EN 60950 AS/NZS 60950-1 C-Tick EMC FCC Part 15 (CFR 47) Class A ICES-003 Class A EN
Inhaltszusammenfassung zur Seite Nr. 16
Federal Communication Commission Interference Statement This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause har
Inhaltszusammenfassung zur Seite Nr. 17
Environmental Specifications he following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause bodily injury. Dimensions 17.32" x 14.70" x 1.73" (440 mm x 375 mm x 44 mm) Unit Weight 14.09 lbs. or 6.39 kg Power 48 VDC, 100-240V 1.4A Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47), Class A EN60950 (2001) Security ACL, 802.1x Operating Temp 0ºC to 40ºC (32ºF to 104ºF) Storage Temp -20ºC to 70ºC (-4ºF to 158ºF) Op
Inhaltszusammenfassung zur Seite Nr. 18
Safety Information Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. SAVE THESE INSTRUCTIONS Attention IMPORT
Inhaltszusammenfassung zur Seite Nr. 19
ore working on equipment, be aware of the hazards involved with electrical circuitry and standard safety practices to prevent accidents. Warning Work During Lightning Activity Do not work on the system or connect or disconnect cables during periods of lightning activity. Attention Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage. Warning Installation Instructions Read the installation instructions before connecting the system to the power source. Attention
Inhaltszusammenfassung zur Seite Nr. 20
Warning SELV Circuit To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Attention Pour éviter une électrocution, ne raccordez pas les circuits de sécurité basse tension (Safety Extra-Low Voltage ou SELV) à des circuits de tension de réseau téléphonique (Telephone N
