Bedienungsanleitung JBL PB10

Inhaltszusammenfassung zur Seite Nr. 1

SPECIFICATIONS THANK YOU FOR CHOOSING JBL
For more than 50 years, JBL note of enjoyment that you you posted on our latest
PB10 PB12
has been involved in every expected – and that when advancements, and helps us
Amplifier
aspect of music and film you think about purchasing to better understand our
Power (RMS): 150 Watts 250 Watts
recording and reproduction, additional audio equipment customers and build products
Driver: 10" Pure-Cellulose Fiber 12" Pure-Cellulose Fiber
from live performances to

Inhaltszusammenfassung zur Seite Nr. 2

READ THIS! Important Safety Precautions! SPEAKER PLACEMENT 11. Power Sources. This product should be 18. Overloading. Do not overload wall operated only from the type of power source outlets, extension cords, or integral • As a general rule, bass where they are generated positioning of your subwoofer CAUTION indicated on the marking label. If you are convenience receptacles, as this can not sure of the type of power supply to your result in a risk of fire or electric shock. response increases a

Inhaltszusammenfassung zur Seite Nr. 3

Dolby Pro Logic (Non-Digital) – Line Level Dolby Digital or DTS (or Other Digital Surround Mode) Connection Use this installation method use the “LFE” position with Make sure your receiver or Use this installation method then you may connect the center and rear speakers for Dolby Pro Logic appli- Dolby Pro Logic-only processor is configured cor- for Dolby Digital, DTS or other subwoofer output on your should be set to “Small” or cations (not Dolby Digital, DTS processors. rectly: Make sure that

Inhaltszusammenfassung zur Seite Nr. 4

Phase Control OPERATION Power When the unit is plugged in from green to red after the turned off, whenever desired. and (for the PB12 only) the input signal to the subwoofer The PB10 must be unplugged The Phase Control determines bass output at the listening in the future you happen to power switch is on and no is removed. Due to JBL’s if you do not wish to leave it in whether the subwoofer’s position. rearrange your listening room signal is received, the LEDs on unique, high-output, high- auto