Inhaltszusammenfassung zur Seite Nr. 1
MICRO COMPONENT SYSTEM
—Consists of CA-UXG1 and SP-UXG1
UX-G1
— CA-UXG1 SP-UXG1
TIMER
TIMER SET ON/OFF STANDBY/ON
REPEAT RANDOM SLEEP
STANDBY/ON
REMAIN PROGRAM FM MODE
VOLUME
TUNER/
TAPE CD
BAND
CD
BEAT CUT
MICRO COMPONENT SYSTEM
DISPLAY/
CLOCK SET
SOUND/ VOLUME
MUTING BASS
REMOTE CONTROL
CD SYNCHRO RECORDING
OPEN
INSTRUCTIONS
LVT1356-005A
[US]
UX-G1[US]_01COVER_1.p65 1 05.3.8, 8:16 PM
English
Inhaltszusammenfassung zur Seite Nr. 2
Warnings, Cautions and Others CAUTION— STANDBY/ON button ! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The STANDBY/ON button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY lamp lights red. • When the unit is turned on, the STANDBY lamp goes off. The power can be remote controlled. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not exp
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user service- able parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT. CAUTION: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the appara
Inhaltszusammenfassung zur Seite Nr. 4
Introduction We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference. Power sources About This Manual •When unplugging the unit from the wall outlet, always pull This manual is organized as follows: on the plug, not the AC power cord. • This manual mainly explains operations using the DO NOT handle the AC power cord w
Inhaltszusammenfassung zur Seite Nr. 5
Contents Location of the Buttons and Controls ............................. 3 Main unit ................................................................................... 3 Remote Control ......................................................................... 5 Getting Started .................................................................. 6 Unpacking ................................................................................. 6 Putting the Batteries into the Remote Control ..........
Inhaltszusammenfassung zur Seite Nr. 6
Location of the Buttons and Controls Become familiar with the buttons and controls on your unit. Main Unit Top view 1 OPEN 5 6 TIMER ON/OFF BAND MULTI SOUND 2 CONTROL /BASS TAPE TUNER CD 7 PHONES CD CONTROL 3 4 8 Front view 9 STANDBY/ON VOLUME p e STANDBY MICRO COMPONENT SYSTEM q r UX-G1 w CD SYNCHRO RECORDING OPEN t Inside the front cover y 3 UX-G1[US]_03name_1.p65 3 05.3.8, 8:16 PM English
Inhaltszusammenfassung zur Seite Nr. 7
Continued Display window on the front panel 12 3 4 56 7 ON OFF SLEEP ST MONO SOUND BASS SYNC MHz kHz MP3 1ALL PRGM RAND TOTAL REMAIN 89q p w e r t See pages in parentheses for details. Main unit Display window 1 Disc cover (12) 1 (timer) indicator 2 PHONES jack (9) 2 ON/OFF (timer on-time/off-time) indicators 3 TIMER ON/OFF button (19) 3 SLEEP indicator 4 SOUND/BASS button (9) 4 FM mode indicators 5 0 OPEN (disc cover open) (12, 13) • ST (stereo), MONO 6 Source buttons 5 SOUND indicator • TAPE,
Inhaltszusammenfassung zur Seite Nr. 8
Remote Control See pages in parentheses for details. 1 TIMER SET button (18, 19) 2 REPEAT button (14) 3 RANDOM button (14) 4 REMAIN button (14) 5 BEAT CUT button (10, 16) 6 DISPLAY/CLOCK SET button (8) TIMER TIMER SET ON/OFF STANDBY/ON 7 MUTING button (9) 9 1 8 SOUND/BASS button (9) p 9 STANDBY/ON button (8, 19) REPEAT RANDOM SLEEP 2 q p TIMER ON/OFF button (19) 3 w q SLEEP button (19) REMAIN PROGRAM FM MODE w PROGRAM button (8, 11, 13, 18) 4 e TUNER/ e FM MODE button (10) TAPE CD BAND r Source
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started Continued Connections Unpacking After unpacking, check to be sure that you have all the To connect speakers following items. You can connect the speakers using the speaker cords. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) 1 2,3 • Remote control (1) • Batteries (2) •AC plug adaptor (1) If any item is missing, consult your dealer immediately. SPEAKER Putting the Batteries into the Remote Control IMPEDANCE 4-16Ω Red Insert the b
Inhaltszusammenfassung zur Seite Nr. 10
FM ANTENNA AM LOOP To connect AM and FM antennas Adjusting the Voltage Selector Before plugging in the unit, set the correct voltage for your area with the voltage selector on the bottom of the unit. FM antenna VOLTAGE 2 SELECTOR AC 220 - 240V 1 AC 110 - 127V Use a screwdriver to move the voltage selector so the voltage number is the same as the voltage where you are plugging in the unit. (See the back cover page.) • DO NOT plug in before setting the voltage selector on the bottom of the unit a
Inhaltszusammenfassung zur Seite Nr. 11
Basic and Common Operations Continued To show the clock when the unit is turned on Setting the Clock On the remote control ONLY: Before operating the unit any further, first set the unit’s clock. DISPLAY/ When you plug in the power cord, “0:00” starts flashing on Press DISPLAY/CLOCK SET. CLOCK SET the display. • Each time you press the button, the display You can set the clock when the unit is either turned on or in changes the clock indication and the normal standby mode. indication alternatel
Inhaltszusammenfassung zur Seite Nr. 12
Adjusting the Volume Selecting the Sound Modes You can adjust the volume level only while the unit is turned You can select one of the 4 sound modes. on. The volume level can be adjusted between “VOL MIN,” •This function also affects the sound from headphones. “VOL 1” – “VOL 39,” and “VOL MAX.” •This function only affects the playback sound, and does not •The volume level has no effect on recording. affect your recording. SOUND/ To increase the volume, press VOLUME +. To select the sound modes,
Inhaltszusammenfassung zur Seite Nr. 13
Listening to FM and AM Broadcasts Continued 2 Press and hold ¢ or 4 Setting the Tuner Interval Spacing (or ¡/¢ or 4/1 on You can select 10 kHz or 9 kHz apart for the AM tuner the unit) for more than 1 interval spacing and 100 kHz or 50 kHz apart for the FM second. tuner interval spacing. • ¢ (¡/¢): Increases the frequencies. •You need to do this setting separately for each band. • 4 (4/1): Decreases the frequencies. On the unit ONLY: The unit starts searching for stations and stops when a stati
Inhaltszusammenfassung zur Seite Nr. 14
Presetting Stations Tuning in to a Preset Station You can preset 30 FM and 10 AM stations manually. On the remote control ONLY: In some cases, test frequencies have been already stored TUNER/ 1 Press TUNER/BAND to select either BAND for the tuner since the factory examined the tuner preset “FM” or “AM.” function before shipment. This is not a malfunction. You The unit automatically turns on and tunes in to can preset the stations you want into memory by following the previously received station—
Inhaltszusammenfassung zur Seite Nr. 15
Playing Back Discs Continued This unit has been designed to play back the following Playing Back the Entire Disc—Normal Play discs—CD, CD-R, and CD-RW. When playing a CD-R or CD-RW 1 Press 0 OPEN on the unit. User-edited CD-Rs (CD-Recordable) and CD-RWs (CD- The disc cover opens. ReWritable) can be played only if they are already •You can insert a disc while listening to another source. “finalized.” • Usually you can play back your original CD-Rs or CD- 2 Place a disc correctly with its label s
Inhaltszusammenfassung zur Seite Nr. 16
To stop playing, press 7. Programming the Track Playing Order—Program Play You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks. To remove the disc, press 0 OPEN on the unit. On the remote control ONLY: 1 Place a disc. • If the current source is not the CD player, press CD. • If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted 2 Press PROGRAM. Playback will not start. PROGRAM Th
Inhaltszusammenfassung zur Seite Nr. 17
When playing back MP3 disc: Playing at Random—Random Play ALL GR. You can play the tracks at random. 1 Canceled On the remote control ONLY: ALL: In Normal Play, repeats all the tracks. RANDOM Press RANDOM before or during playing. In Program Play, repeats all the tracks in the The RAND and indicators light up on the display. program. GR.: In Normal Play, repeats all the tracks in a group. In Program Play and Random Play, this function is not available. To stop playing, press 7. 1: Repeats one
Inhaltszusammenfassung zur Seite Nr. 18
Playing Back Tapes For Tape operations, use buttons inside the front cover on the 4 Close the cassette holder gently. unit. Playing Back a Tape You can play back type I tapes only. On the unit ONLY: 1 Open the front cover. 5 Press TAPE. TAPE The unit automatically turns on and the source changes to the tape deck. •You can select to the tape by pressing TAPE on the remote control. 6 Press # (play). The tape starts playing. • When the end of the tape is reached, playing 2 Press &/) (stop/cassette
Inhaltszusammenfassung zur Seite Nr. 19
Recording Continued IMPORTANT: Recording from the Radio • It may be unlawful to record or play back copyrighted material without the consent of the copyright owner. •The recording level is automatically set correctly, so it is On the unit ONLY: not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually 1 Put a recordable cassette in with the exposed listening to without affecting the recording level. part of the tape down. • If recordings you have
Inhaltszusammenfassung zur Seite Nr. 20
Recording Discs —Disc Synchronized Recording You cannot press ‡ in the following cases: • If no cassette is inserted. You can start disc play and recording at the same time. • If a protected tape is inserted. On the unit ONLY: To stop recording for a moment, press *. The recording is paused, but the CD playback 1 Put a recordable cassette in with the exposed does not stop. part of the tape down. To resume recording, press * again. • See also page 15. To stop recording, press &/). 2 Close the cas
