Inhaltszusammenfassung zur Seite Nr. 1
41010013
Z
MC-DV600
DVD Receiver
OWNER’S MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
15) Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT outlet. Do not defeat the safe
Inhaltszusammenfassung zur Seite Nr. 3
For U.S.A. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR This equipment has been tested and found to comply with the MOISTURE. limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This CAUTION equipment generates, uses, and can radiate radio frequency energy < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO EXPOSE
Inhaltszusammenfassung zur Seite Nr. 4
Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Use .................................................... 5 Settings (Introduction) ....................................... 33 Settings (GENERAL SETUP).................................... 34 Discs ......................................................... 6 Settings (AUDIO SETUP) ...................................... 35 USB memory device compatibility ............................. 8
Inhaltszusammenfassung zur Seite Nr. 5
Before Use What’s in the box Placement of the unit Confirm the supplied standard accessories. < Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations Remote control unit (RC-1271) x 1 subject to vibrations and excessive dust, heat, cold or moisture. < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. Make sure there is at least 8” (20 cm) of spa
Inhaltszusammenfassung zur Seite Nr. 6
Discs About DVD-RW Type of discs that can be played on this unit < DVD-RW discs that were recorded with copy-once only permission This player can playback discs bearing any of the following logos: cannot be played. < When playing a DVD-RW disc that was edited on a DVD recorder, DVD Video the screen may momentarily black out at the edited point. M Single-sided or double-sided discs M Single layer or dual layer discs < When playing a DVD-RW disc that was edited on a DVD recorder, M Dolby Digita
Inhaltszusammenfassung zur Seite Nr. 7
Playable file format CAUTION This unit can play following files recorded on a CD-R, CD-RW, DVD-R, < Do not play any disc that is warped, deformed or damaged. Playing DVD-RW or USB memory device: such discs may cause irreparable harm to the playing mechanisms. < Printable discs are not recommended, as the label side might be sticky and damage the unit. M MP3 files < Do not stick papers or protective sheets on the discs and do not M Windows Media-formatted audio files use any protective coating
Inhaltszusammenfassung zur Seite Nr. 8
USB memory device compatibility Connecting Antennas (FM) < Only USB flash memory can be used. Do NOT use a high-capacity FM indoor antenna USB hard disc with this unit. < Some flash memory players that charge from an USB terminal cannot be played back. < Hard disk drives, CD/DVD drives, and other devices than flash memory connected via USB cannot be used. < The MC-DV600 cannot copy, move, or delete files. < Playable format: FAT12, FAT16, FAT32 < NTFS, HFS, HFS+ cannot be used. < Max. number o
Inhaltszusammenfassung zur Seite Nr. 9
Speaker Connection After all connections are complete, connect the power cord’s plug to the AC wall socket. < Read the instructions of each component you intend to use with this unit. < Be sure to connect each plug securely. To prevent hum and noise, do not bundle the connection cords. Subwoofer Before connection How to connect Check the impedance of your speakers. Connect speaker with an 1. Unlock the lever of the speaker terminal to connect the cable. impedance of 4 Ω or more. The black speak
Inhaltszusammenfassung zur Seite Nr. 10
RCA video cable Component video cable S-video cable HDMI cable Connection to a TV After all connections are complete, connect the power cord’s plug to the AC wall socket. < Read the instructions of each component you intend to use with this unit. < Be sure to connect each plug securely. To prevent hum and noise, do not bundle the connection cords. C D A B Connect only one of these cables. HDMI S-VIDEO CB YCR VIDEO IN IN IN COMPONENT VIDEO IN TV (Monitor) 10
Inhaltszusammenfassung zur Seite Nr. 11
< Adjust the video aspect ratio to match that of the TV (page 34). B S-video output terminal Use a commercially available S-video cable to connect the unit to < This unit adopts analog copy protection features. If the unit is the S-video input of a suitably equipped TV or monitor. Use this connected to a TV through a VCR (video cassette recorder), the connection in preference to a composite video connection. resulting playback may be affected. Connect the unit directly to the TV. C Componen
Inhaltszusammenfassung zur Seite Nr. 12
RCA cable RCA coaxial digital cable RCA cable Connection to Audio Equipments etc. Digital audio device (CD recorder, MD deck, etc.) E G F F Wall socket CD player, etc. Cassette tape deck, etc. 12
Inhaltszusammenfassung zur Seite Nr. 13
After all connections are complete, connect the power cord’s plug to the AC wall socket. < Read the instructions of each component you intend to use with this unit. < Be sure to connect each plug securely. To prevent hum and noise, do not bundle the connection cords. E Digital audio output terminal G Power cord Digital audio from DVD-Video, CD and video CD is output from After all other connections have been made, connect the AC this terminal. power cord into the wall socket. Ensure that yo
Inhaltszusammenfassung zur Seite Nr. 14
Identifying the Parts (Main Unit) A B C D P O J F N M L K I H G E 14
Inhaltszusammenfassung zur Seite Nr. 15
Remote sensor REPEAT A L Receives signals from the remote control unit. Point the remote In DISC or USB mode, use this button for Repeat or Shuffle control unit at this sensor when operating the remote control Playback. unit. M USB connector B Display You can connect an USB memory device to this connector. Disc tray AUX 2 IN C N You can connect a portable audio player to this jack. VOLUME D PHONES O Turn this knob to adjust the volume level. To listen with headphones, first lower the vo
Inhaltszusammenfassung zur Seite Nr. 16
Identifying the Parts (Remote Control Unit) STANDBY/ON A Use this button to turn the unit on and standby. Source B Use these buttons to select a source. C PRESET EQ (Preset Equalizer) Use this button to select a Preset Equalizer (Classic, Jazz, Rock, Pop and flat (off) modes). A N D DIMMER B Use this button to change the brightness of the front panel C O display. D P E Q F R TITLE E G S During PBC playback of a video CD, use this button to display a menu. H SUBTITLE F Use this button
Inhaltszusammenfassung zur Seite Nr. 17
Front panel display S.BASS A B C D E O Use this button to boost the bass. F G LOUDNESS P Use this button to compensate for the loss of bass at low Q P O N M L K J I H volumes. Q AUDIO Use this button to select the audio for playback. A Shows currently selected equalizer. R ZOOM B Shows the type of the current disc or file. In DISC or USB mode, use this button to enlarge the image. MENU C S Shows frequency, volume, etc. In DISC mode, use this button with menu-enabled DVD discs to bring
Inhaltszusammenfassung zur Seite Nr. 18
Remote Control Unit The provided Remote Control Unit allows the unit to be operated Battery replacement from a distance. If the distance required between the remote control unit and main When operating the remote control unit, point it towards the remote unit decreases, the batteries are exhausted. In this case replace the sensor on the front panel of the unit. batteries with new ones. For more information about collection of batteries, please contact < Even if the remote control unit is
Inhaltszusammenfassung zur Seite Nr. 19
Setting the Clock When you connect the power cord into the wall socket and turn on 4 Press the CLOCK button. the unit for the first time, set the clock. 1 If the unit is on, press the STANDBY/ON button to put it in the standby mode. The “minute” value starts blinking. Press the Volume (+ or –) button to set the current 5 minute. Press the CLOCK button. 2 Press the CLOCK button. 6 < If “- -:- -” blinks on the display, press the CLOCK button again. “Clock Set” appears on the display,
Inhaltszusammenfassung zur Seite Nr. 20
Basic Operation (1) This chapter describes the basic operation which is available in every < To listen to an external source connected to the AUX IN jack, mode. select AUX1 or AUX2. When you use the unit for the first time, set the clock and the setting of the unit. (see previous page for “Setting the Clock” and page 33 for < You can also select AUX1 or AUX2 by pressing the AUX button “Settings”). on the remote control unit once or twice. 1 Press the STANDBY/ON button to turn the unit on. Pl
