Inhaltszusammenfassung zur Seite Nr. 1
Micro Hi-Fi System MC150
1
Inhaltszusammenfassung zur Seite Nr. 2
Important notes for users in the Italia U.K. DICHIARAZIONE DI CONFORMITA’ Mains plug Si dichiara che l’apparecchio MC150 Philips This apparatus is fitted with an approved 13 risponde alle prescrizioni dell’art. 2 comma 1 del Amp plug. To change a fuse in this type of plug D.M. 28 Agosto 1995 n. 548. proceed as follows: Fatto a Eindhoven 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, Philips Consumer Electronics A.S.T.A. or BSI approved type. Philips, Glaslaan 2 5
Inhaltszusammenfassung zur Seite Nr. 3
@ 1 2 $ 3 5 ! # 7 0 % ! 1 2 0 3 9 4 8 5 7 6 3 3 xxxxx English
Inhaltszusammenfassung zur Seite Nr. 4
DK SF Advarsel: Usynlig laserstråling ved åbning Luokan 1 laserlaite når sikkerhedsafbrydere er ude af funktion. Varoitus! Laitteen käyttäminen Undgå utsættelse for stråling. muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän Bemærk: Netafbryderen er sekundært turvallisuusluokan 1 ylittävälle indkoblet og ofbryder ikke strømmen fra näkymättömälle lasersäteilylle. nettet. Den indbyggede netdel er derfor Oikeus muutoksiin varataan. Laite ei tilsluttet til lysnettet så
Inhaltszusammenfassung zur Seite Nr. 5
Index English ------------------------------------------------6 Français -------------------------------------------- 21 Español --------------------------------------------- 36 Deutsch--------------------------------------------- 51 Nederlands ---------------------------------------- 66 Italiano----------------------------------------------81 Svenska--------------------------------------------- 96 Dansk --------------------------------------------- 111 Suomi ------------------------------------
Inhaltszusammenfassung zur Seite Nr. 6
English Contents General Information Maintenance.............................................. 16 Environmental information ................................ 7 Supplied accessories ............................................ 7 Clock/Timer Safety information ................................................ 7 Setting the clock ................................................. 17 Viewing the clock ............................................... 17 Preparation Setting the timer .....................
Inhaltszusammenfassung zur Seite Nr. 7
General Information This product complies with the radio Safety Information interference requirements of the European ● Before operating the system, check that the Community. operating voltage indicated on the typeplate (or the voltage indication beside the voltage Environmental Information selector) of your system is identical with the All unnecessary packaging has been omitted. We voltage of your local power supply. If not, please have tried to make the packaging easy to consult your dealer. s
Inhaltszusammenfassung zur Seite Nr. 8
English Preparations Rear connections B Antennas Connection Connect the supplied AM loop antenna and FM The type plate is located at the rear of the antenna to the respective terminals. Adjust the system. position of the antenna for optimal reception. For users in the U.K.: please follow the instructions on page 2. AM Antenna A Power Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. WARNING! –For optimal performance, use only the original p
Inhaltszusammenfassung zur Seite Nr. 9
Preparations FM Antenna Before using the remote control ● Extend coil antenna at the back of the unit fully 1 Pull out the plastic protective sheet. for optimum reception. 2 Select the source you wish to control by pressing one of the source select keys on the C Speakers Connection remote control (for example CD, TUNER). 3 Then select the desired function (for example Front Speakers É, í, ë). Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT"
Inhaltszusammenfassung zur Seite Nr. 10
English Controls (illustrations on page 3) ! PROGRAM (PROG) Controls on the system and for CD ................. programs tracks and reviews the remote control program. for Tuner ............. programs tuner stations manually 1 STANDBY-ON / y or automatically. – switches the system to standby/on. @ 2 SOURCE (CD/ TUNER/ TAPE) – connect headphones. – switches on the system. # OPEN•CLOSE – selects the respective sound source for CD/ FM/ – opens/closes the CD door. MW/ TAPE. $ MUTE 3 DBB1 / DBB2 (DB
Inhaltszusammenfassung zur Seite Nr. 11
Basic Functions Adjusting volume and sound 1 Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to increase or decrease volume. ➜ Display shows the volume level Uo and a number from 0-32. 2 Press DBB 1 or DBB 2 (DBB on the remote control) to switch bass enhancement on or off. ➜ Display shows: or if the DBB is activated. 3 Press MUTE on the remote control to stop sound play- back instantly. IMPORTANT: ➜ Playback will continue Before you operate the system, complete without sound and the disp
Inhaltszusammenfassung zur Seite Nr. 12
English CD Operation 5 To pause playback press 2;. Press 2; again to resume play. ➜ The display freezes and the current track number flashes when playback is paused. 6 To stop disc playback, press 9. Note: CD play will also stop when; – the CD door is opened. – the disc has reached the end. – you select another source: TAPE, TUNER. – you select standby. – you press the tape deck PLAY 2 key. Selecting a different track IMPORTANT: ● Press ¡1 or 2™ (à or á on remote control) The lens of the CD pl
Inhaltszusammenfassung zur Seite Nr. 13
CD Operation Different play modes: SHUFFLE Programming track numbers Programme in the STOP position to select and and REPEAT store your disc tracks in the desired sequence. If You can select and change the various play you like, store any track more than once. Up to modes before or during playback. The play 20 tracks can be stored in the memory. modes can also be combined with PROGRAMME. 1 Press PROGRAM (PROG on the remote control) to enter the programming mode. SHUFFLE .........tracks of the en
Inhaltszusammenfassung zur Seite Nr. 14
English Radio Reception Programming radio stations You can store up to a total of 30 (20 FW and 10 MW) radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number 1. From this preset number upwards, former programmed radio stations will be overridden. 1 Press ¡ or ™ (on the remote control) to select the preset number where programming should start. Note: – If no preset number is selected, default is preset Tuning to radio stations (1) and all
Inhaltszusammenfassung zur Seite Nr. 15
Tape Operation / Recording General information on recording ● Recording is permissible insofar as copyright or other rights of third parties are not infringed. ● For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken. This deck is not suited for recording on METAL (IEC IV) type tapes. ● The best recording level is set automatically. Altering the VOLUME or DBB controls will not affect the recording in progress. ● The recording sound quality might differ depen
Inhaltszusammenfassung zur Seite Nr. 16
English Tape Operation / Recording To select and record a particular passage Recording from the radio within a CD track: ● Press and hold down on à or á. Release the 1 Tune to the desired radio station (see Tuning to control when you recognize the passage you radio stations). want. 2 Press STOP•OPEN to open the tape door. ● To interrupt CD playback press 2; . ● Recording starts from this exact point in the 3 Insert a suitable tape into the deck and close the track when you press RECORD 0. tape d
Inhaltszusammenfassung zur Seite Nr. 17
Clock/Timer Setting the timer ● The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time. The clock time needs to be set first before the timer can be used. ● If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically. 1 In any mode, press TIMER for more than 2 seconds. 2 Press SOURCE (VOL 3 / 4 on the remote control) to select sound source. 3 Press TIMER to confirm your desired source. Setting the clo
Inhaltszusammenfassung zur Seite Nr. 18
English Clock/Timer ● To deactivate, press SLEEP on the remote Activating and deactivating control once or more until OFF is shown, or SLEEP press STANDBY ON on the system or The sleep timer enables the system to switch off remote control. by itself after a set period of time. The clock time needs to be set first before the sleep timer can be used. ● Press SLEEP on the remote control repeatly to select desired time before system shuts off. ➜ Display shows SLEEP and series of time options for sel
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. Problem Solution CD OPERATION “no cd” is displayed. – Insert a disc. – Check if the disc is inserted upside down
Inhaltszusammenfassung zur Seite Nr. 20
English Troubleshooting The remote control does not function – Select the source (CD or TUNER, for example) properly. before pressing the function button (É,í,ë). – Reduce the distance between the remote control and the system. – Insert the batteries with their polarities (+/– signs) aligned as indicated. –Replace the batteries. –Point the remote control directly toward IR sensor on the front of the system. The timer is not working. – Set the clock correctly. – Press TIMER to switch on the timer
