Bedienungsanleitung Nady Systems SD-2418

Inhaltszusammenfassung zur Seite Nr. 1

OWNER’S MANUAL
SD-2418
Signal Distributor
PRO RACK GEAR

Inhaltszusammenfassung zur Seite Nr. 2

SD-2418 Signal Distributor Congratulations on your choice of the SD-2418 signal distributor — you have purchased one of the finest signal distributors on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO SD-2418 has superior performance and greater flexibility than any other signal distributors in its price range. Please read this manual carefully to get the most out of your new unit. Than

Inhaltszusammenfassung zur Seite Nr. 3

WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed

Inhaltszusammenfassung zur Seite Nr. 4

INSTALLATION To ensure years of enjoyment from your NADY AUDIO SD-2418, please read and understand this manual thoroughly before using the unit. INSPECTION Your NADY AUDIO SD-2418 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. [Please note: Nady Systems is not responsible for shipping damage. If y

Inhaltszusammenfassung zur Seite Nr. 5

CONTROLS AND CONNECTIONS FRONT (1) (2) (3) (5) (4) (6) 1. POWER SWITCH 3. CHANNEL A SIGNAL LED Use this switch to power unit ON or OFF. The integrated LED will This LED lights green when an audio signal is detected at the light when the unit is ON. Before turning on this unit, verify input of Channel A. The LED will light red when the input signal connection to the proper voltage AC source, check all is too high and causes clipping. If the LED is blinking red, turn connections and turn down th

Inhaltszusammenfassung zur Seite Nr. 6

SPECIFICATIONS Frequency Response ..................................................................20Hz - 20KHz +/-3dB Total Harmonic Distortion (THD) + Noise ................................< 0.03 % S/N Ratio......................................................................................> 98 dB Maximum Gain ............................................................................+6dB per channel Input Impedance ........................................................................20

Inhaltszusammenfassung zur Seite Nr. 7

Inhaltszusammenfassung zur Seite Nr. 8

SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE,